1. Introduktion
This manual provides instructions for the installation, operation, and maintenance of your Eagle Lights HALOS Saddlebag LED Filler Lights (Model SBL6B). These lights are designed to enhance the visibility and aesthetic of Harley Davidson Motorcycles by providing integrated running, brake, and turn signal functions. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Sikkerhedsoplysninger
- Always disconnect the motorcycle's battery before performing any electrical work to prevent electrical shock or damage.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
- Verify that the lights are correctly installed and functioning before riding.
- Consult a qualified motorcycle technician if you are unsure about any part of the installation process.
- Produktet må ikke ændres. Uautoriserede ændringer kan ugyldiggøre garantien og kompromittere sikkerheden.
3. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- LED Filler Panel Lights (2 units)
- Backplates (2 units)
- Ledningsnet
- Monteringshardware
Billede: Alle komponenter er inkluderet i pakken.
4. Installationsvejledning
The Eagle Lights HALOS Saddlebag LED Filler Lights are designed for plug-and-play installation, integrating seamlessly with your Harley Davidson's existing wiring harness. Follow these steps for proper installation:
- Forberedelse: Ensure the motorcycle is turned off and the battery is disconnected.
- Locate Saddlebag Filler Panels: Identify the existing filler panels on your motorcycle's saddlebags.
- Remove Existing Panels: Carefully remove the stock filler panels.
- Mount Backplates: Secure the provided backplates to the motorcycle's frame where the filler panels were located. Use the supplied hardware.
- Tilslut ledninger: Connect the wiring harness from the LED filler lights to the motorcycle's existing harness. Ensure the correct left and right connections are made. The connectors are designed for a direct fit.
Image: Detail of the plug-and-play wiring connector.
- Fastgør LED-lys: Position the LED filler lights onto the backplates, sandwiching the motorcycle's filler piece. Secure them using the provided screws. Note: Some users have reported needing to source slightly longer or more robust screws for optimal mounting. Ensure all components are securely fastened to prevent vibration-related issues.
- Test funktionalitet: Reconnect the battery and test all light functions (running, brake, and turn signals) before riding.
Image: Installed LED Filler Lights on a motorcycle.
5. Betjeningsvejledning
The Eagle Lights HALOS Saddlebag LED Filler Lights provide three primary functions:
- Kørelys: When the motorcycle's ignition is on, the lights will illuminate with a constant, bright glow, increasing your visibility to other road users.
- Bremselys: When the brake lever or pedal is engaged, the lights will intensify, signaling braking action.
- Blinklys: When the turn signal is activated, the corresponding light will flash, indicating your intended direction.
Image: Visual representation of light functions (Turn Signal, Running/Brake Light, Combined).
6. Vedligeholdelse
These LED filler lights are constructed with durable, waterproof LEDs designed for longevity and reliable performance in various weather conditions. Minimal maintenance is required:
- Rensning: Clean the light lenses periodically with a soft cloth and mild soap and water to remove dirt and road grime. Avoid abrasive cleaners or solvents.
- Inspektion: Regularly inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure all mounting hardware remains tight.
- Vandtætning: The lights are designed to be waterproof. Avoid directing high-pressure water streams directly at the light seals during washing.
7. Fejlfinding
If you experience issues with your Eagle Lights HALOS Saddlebag LED Filler Lights, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene lyser ikke | Loose or disconnected wiring harness Sprunget sikring Faulty connection to motorcycle's power | Check all wiring connections for tightness and proper seating. Ensure the motorcycle's fuse for lighting is intact. Verify power supply to the harness. |
| Et lys virker ikke | Specific light unit connection issue Damaged light unit | Inspect the wiring connection for the non-functioning light. If connections are secure, the light unit may be faulty and require replacement. |
| Lysene flimrer eller dæmpes | Dårlig elektrisk forbindelse Utilstrækkelig strømforsyning | Check all connections for corrosion or looseness. Ensure the motorcycle's electrical system is providing stable 12V power. |
| Turn signal not flashing correctly | Forkert ledningsføring Motorcycle's flasher relay issue | Verify turn signal wiring is correct. If other turn signals also have issues, consult your motorcycle's service manual regarding the flasher relay. |
If these troubleshooting steps do not resolve the issue, please contact Eagle Lights customer support for further assistance.
8. Specifikationer
- Mærke: Ørnelys
- Model: HALOS Saddlebag Filler Lights
- Varemodelnummer: SBL6B
- Specifikke anvendelser for produktet: Motorcykel
- Voltage: 12 volt
- Farve: Black (Housing)
- Autodel position: Bag
- Særlige funktioner: Vandtæt
- Varens vægt: 1.31 pund
- Pakkedimensioner: 11.25 x 7.4 x 2.9 tommer
- UPC: 606795470341
9. Garanti og support
Eagle Lights provides a Livstidsgaranti for these HALOS Saddlebag LED Filler Lights. This warranty covers manufacturing defects and ensures peace of mind regarding the product's quality and durability.
For warranty claims, technical support, or any questions regarding your product, please contact Eagle Lights directly. You can find more information and contact details on the official Eagle Lights store page:
