Adler AD 1196B Digital Vækkeur Brugermanual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your Adler AD 1196B Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.

2. Produktet er slutview

2.1 Nøglefunktioner

• Digital time display with 12/24 hour format.
• Baggrundsbelyst display for let viewing, automatically turns off after 4 seconds.
• Three independent alarm time settings.
• Three alarm activation settings: 5 days (weekday), 6 days (weekday + Saturday), 7 days (every day).
• Displays current time, date, indoor temperature, and humidity.
• Battery-powered for portability and backup during power outages.

2.2 Pakkens indhold

• Adler AD 1196B Digital Alarm Clock Unit
• Brugermanual

Note: 2x AA batteries are required and not included in the package.

Figur 1: Forside view of the Adler AD 1196B Digital Alarm Clock, displaying 12:00, 26°C, 56% humidity, and the current date.

Figure 2: The Adler AD 1196B Digital Alarm Clock shown in its retail packaging, highlighting key features.

3. Opsætning

3.1 Batteriinstallation

1. Find batteridækslet på bagsiden af ​​vækkeuret.
2. Skub eller løft dækslet for at åbne rummet.
3. Insert two (2) AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Sæt batterirummets dæksel på igen.

The clock will power on automatically once batteries are inserted. The display will show default settings or begin flashing.

3.2 Indledende tænding

Upon successful battery installation, the display will illuminate. You may need to press a button (e.g., "MODE" or "SET") to activate the display if it remains blank after battery insertion. The backlight will activate briefly and then turn off.

4. Betjeningsvejledning

Familiarize yourself with the control buttons, typically located on the back or top of the device. Common buttons include: MODE, SET, UP/+, DOWN/-, ALARM.

4.1 Indstilling af klokkeslæt

1. Tryk og hold på SÆT knap (eller MODE button, depending on model) until the hour digits begin to flash.
2. Brug OP/+ or NED/- knapper for at justere timen.
3. Trykke SÆT (eller MODE) again to move to the minute setting.
4. Brug OP/+ or NED/- knapper for at justere minutterne.
5. Fortsæt med at trykke SÆT (eller MODE) to cycle through 12/24 hour format, and then to exit time setting mode.

4.2 Indstilling af dato

1. From normal time display, press the MODE button repeatedly until the date display starts flashing or you enter date setting mode.
2. The year digits may flash first. Use OP/+ or NED/- at justere året.
3. Trykke MODE to move to the month setting, then adjust with OP/+ or NED/-.
4. Trykke MODE to move to the day setting, then adjust with OP/+ or NED/-.
5. Trykke MODE again to confirm and exit date setting.

4.3 Setting Alarms (Alarm 1, Alarm 2, Alarm 3)

The AD 1196B features three independent alarms. The process is similar for each.

1. Tryk på ALARM knap én gang til view Alarm 1. Press again for Alarm 2, and a third time for Alarm 3.
2. Mens viewing the desired alarm (e.g., AL1), press and hold the SÆT knappen, indtil alarmens timecifre blinker.
3. Bruge OP/+ or NED/- for at indstille alarmtiden.
4. Trykke SÆT to move to the alarm minute setting.
5. Bruge OP/+ or NED/- for at indstille alarmens minutter.
6. Trykke SÆT again to confirm the alarm time.
7. For at aktivere/deaktivere en alarm skal du trykke på ALARM button repeatedly until the alarm icon (e.g., bell symbol) appears or disappears next to the corresponding alarm number (AL1, AL2, AL3).

4.4 Alarm Activation Modes (5, 6, 7 Days)

After setting an alarm time, you can choose its activation frequency:

1. While in alarm setting mode (after setting minutes for an alarm), press SÆT one more time. The display will show a day indicator (e.g., "5 DAY", "6 DAY", "7 DAY").
2. Bruge OP/+ or NED/- to cycle through the options:
   • 5 DAG: Alarm sounds Monday to Friday.
   • 6 DAG: Alarm sounds Monday to Saturday.
   • 7 DAG: Alarm sounds every day of the week.
3. Trykke SÆT to confirm your selection and exit alarm setting for that specific alarm.

4.5 Baggrundsbelysningsfunktion

The display features a backlight for improved visibility in low light conditions. The backlight automatically activates when a button is pressed and turns off after approximately 4 seconds to conserve battery power.

4.6 Temperatur- og fugtighedsvisning

The alarm clock continuously displays the current indoor temperature (in Celsius) and relative humidity percentage. No specific action is required to view these readings; they are shown on the main display.

5. Vedligeholdelse

5.1 Rengøring

To clean the alarm clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.

5.2 Udskiftning af batteri

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 3.1. Always replace both batteries with new AA batteries of the same type. Dispose of old batteries responsibly according to local regulations.

6. Fejlfinding

7. Specifikationer

• Model: AD 1196B
• Strømkilde: 2 x AA batterier (medfølger ikke)
• Skærmtype: Digital LCD med baggrundsbelysning
• Funktioner: Time, Date, Day of Week, Temperature (°C), Humidity (%), 3 Alarms with 3 Activation Modes
• Baggrundsbelysningens varighed: Cirka 4 sekunder
• Materiale: Plast
• Dimensioner (B x D x H): 11 cm x 3.81 cm x 5 cm
• Vægt: 1.6 kg

8. Garanti og support

For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Adler