Brugermanual til Brady Industrial RFID- og 2D-stregkodescanner

Indledning

This manual provides comprehensive instructions for the safe and efficient operation of the Brady B-HH83-UHF-US Industrial RFID and 2D Barcode Scanner. This device is designed for high-performance RFID reading, barcode scanning, and mobile computing in challenging industrial environments. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger:

• Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller overdreven fugtighed.
• Avoid dropping the device from heights greater than 5 feet, as this may cause damage despite its rugged design.
• Use only Brady-approved accessories and power adapters.
• Forsøg ikke selv at skille enheden ad eller reparere den. Overlad al service til kvalificeret personale.
• Hold enheden væk fra stærke magnetiske felter.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Brady B-HH83-UHF-US Industrial RFID and 2D Barcode Scanner
• USB kabel
• Strømadapter (hvis inkluderet)
• Hurtig startvejledning
• Lithium-ion-batteri (forinstalleret eller separat)

Produkt overview

Familiarize yourself with the components of your Brady B-HH83-UHF-US scanner.

Figur 1: Foran vinklet view of the Brady B-HH83-UHF-US scanner, showing the display screen with the Brady logo and the ergonomic handle.

Figur 2: Top-down view of the scanner, highlighting the display, navigation buttons, and the USB-C port at the front base.

Figur 3: Side view of the scanner, showing the battery compartment cover and the integrated RFID antenna area.

Figur 4: Bund view of the scanner, illustrating the charging contacts and the overall robust construction.

Nøglekomponenter:

• Skærm: Touch-sensitive interface for navigation and data display.
• Scan Trigger: Button located on the handle for initiating RFID reads or barcode scans.
• RFID Antenna: Integrated for high-performance UHF RFID reading.
• 2D Barcode Imager: For scanning various 1D and 2D barcode symbologies.
• USB-C-port: Til opladning og dataoverførsel.
• Batterirum: Houses the removable Lithium Ion battery.

Opsætning

1. Opladning af batteriet

1. Connect the USB cable to the scanner's USB-C port.
2. Connect the other end of the USB cable to the power adapter, then plug the adapter into a wall outlet.
3. Allow approximately 3-4 hours for a full charge. The charging indicator light will change color or turn off when fully charged.

Note: A fully charged battery provides up to 12 hours of continuous use.

2. Tænd/sluk

• For at tænde: Tryk og hold tænd/sluk-knappen nede (normalt placeret på siden eller toppen), indtil skærmen lyser.
• For at slukke: Press and hold the Power button until a power-off menu appears on the screen. Select "Power Off".

3. Indledende konfiguration

Upon first power-on, the device may guide you through an initial setup wizard for language, time zone, and Wi-Fi connection. Follow the on-screen prompts.

• Wi-Fi-forbindelse: Navigate to Settings > Network & Internet > Wi-Fi to connect to your wireless network.
• Bluetooth-parring: Navigate to Settings > Connected devices > Pair new device to connect to Bluetooth-compatible devices.

Betjeningsvejledning

1. RFID Reading

1. Ensure the RFID application is open on the device.
2. Point the RFID antenna towards the RFID tags you wish to read.
3. Press and hold the scan trigger. The device will begin reading RFID tags within its range (up to 50 feet).
4. Release the trigger to stop reading. Read data will be displayed on the screen or sent to the connected system.

Tip: Software-controllable RFID antenna polarizations can be adjusted in the application settings for optimal read performance in different orientations.

2. Stregkodescanning

1. Open the barcode scanning application or position the cursor in a field where barcode input is expected.
2. Aim the barcode imager at the barcode, ensuring the red aiming beam covers the entire barcode.
3. Press the scan trigger. A successful scan will typically be indicated by a beep and/or a green light.
4. The barcode data will be entered into the active field.

3. Dataoverførsel

Data collected by the scanner can be transferred via Wi-Fi, Bluetooth, or USB cable, depending on your application and system configuration.

• Wi-Fi: Data can be synchronized with network servers or cloud services.
• Bluetooth: Connect to compatible devices like laptops or mobile printers for direct data transfer.
• USB-kabel: Connect the scanner to a computer to access its internal storage for data files.

Opretholdelse

Rengøring af enheden

• Tør ydersiden af ​​enheden af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Til skærmen skal du bruge en mikrofiberklud, der er specielt designet til elektronik.
• Sørg for, at alle porte er fri for støv og snavs.

Batteripleje

• For at maksimere batteriets levetid bør du undgå at aflade batteriet helt ofte.
• Store the device with a partial charge (around 50%) if it will not be used for an extended period.
• Udskift batteriet, hvis dets kapacitet reduceres betydeligt.

Opbevaring

Opbevar scanneren et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.

Fejlfinding

Specifikationer

Garanti og support

Garantioplysninger

This Brady product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Brady webhjemmeside for detaljerede garantivilkår.

Kundesupport

For technical assistance, troubleshooting, or service inquiries, please contact Brady Customer Support:

• Webwebsted: www.bradycorp.com
• Telefon: Refer to the contact information provided on the Brady webwebsted for din region.

When contacting support, please have your product model number (B-HH83-UHF-US) and serial number ready.