Kiloview N3-S 3G-SDI/NDI tovejskonverter brugermanual

1. Introduktion

Kiloenview N3-S is a versatile 3G-SDI and NDI bidirectional converter designed for professional video workflows. It functions as both an encoder, converting 3G-SDI video input to full NDI with a 3G-SDI loop output, and a decoder, converting a full NDI input to 3G-SDI video output. This device integrates essential features such as a large tally light, 3.5mm audio line input and output, and Power over Ethernet (PoE) capability, making it suitable for various production environments.

Figur 1: Foran og bagpå view af kiloetview N3-S converter, showcasing dens kompakte design og forskellige porte.

2. Nøglefunktioner

• Tovejskonvertering: Supports 3G-SDI to Full NDI encoding and Full NDI to 3G-SDI decoding.
• Video af høj kvalitet: Handles video resolutions up to 1080p60.
• Fleksible strømmuligheder: Can be powered via Power over Ethernet (PoE) or a 5-18 VDC power adapter.
• Lydforbindelse: Features 3.5mm audio line input and output for integrated audio solutions.
• Tally Light: Integrated tally light for clear status indication in live production environments.
• 3G-SDI Loop Output: Provides a 3G-SDI loop output when encoding, allowing for local monitoring.

3. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle nedenstående varer er til stede og i god stand:

• 1x Kiloview N3-S 3G-SDI and NDI Bidirectional Converter
• 1x Power Supply (DC adapter)
• 1x Cold Shoe Adapter
• 1x USB-C to USB-A Adapter

4. Enhedslayout og tilslutninger

Familiarize yourself with the various ports and indicators on the N3-S converter.

Figure 2: Detailed diagram showing the front and rear panels with labeled ports and indicators.

Frontpanel:

• USB-port: For firmware upgrades or connecting USB accessories.
• Tally Light: Indicates device status (e.g., program/preview).
• Signalindikator: Provides visual feedback on video signal presence.

Bagside:

• NDI | PoE Port: RJ45 Ethernet port for NDI data transmission and Power over Ethernet.
• SDI UD: 3G-SDI loop output or decoded SDI video output.
• SDI IN: 3G-SDI video input.
• 3.5 mm lyd: Line input and output for external audio.
• DC 5-18V: Power input for the included DC adapter.
• Optælling: External tally light connection.

5. Opsætningsvejledning

1. Strømtilslutning:
   • Connect the provided DC power adapter to the "DC 5-18V" port on the rear panel and plug it into a power outlet.
   • Alternatively, if using PoE, connect an Ethernet cable from a PoE-enabled switch or injector to the "NDI | PoE" port.
2. Video Input (Encoding Mode):
   • Connect your 3G-SDI video source (e.g., camera, video switcher) to the "SDI IN" port using a 75-ohm SDI cable.
   • If local monitoring is required, connect a display to the "SDI OUT" port.
3. Video Output (Decoding Mode):
   • Connect a display or video switcher to the "SDI OUT" port using a 75-ohm SDI cable.
4. Netværks forbindelse:
   • Connect an Ethernet cable from your network switch or router to the "NDI | PoE" port. Ensure the network supports NDI protocols.
5. Lydforbindelse (valgfrit):
   • For external audio input, connect an audio source to the 3.5mm audio input.
   • For audio monitoring or output, connect headphones or an audio receiver to the 3.5mm audio output.

Figure 3: The Kiloview N3-S converter shown mounted on a professional video camera, demonstrating a typical setup for mobile production.

6. Betjeningsvejledning

6.1. Web Interface adgang

The N3-S is configured and managed via a web-based interface. To access it:

1. Ensure the N3-S is powered on and connected to your network.
2. Use a computer on the same network.
3. Åbn a web browser and enter the IP address of the N3-S. The default IP address can usually be found using a network scanning tool or Kiloview's IP Finder software.
4. Log in using the default credentials (refer to the Kiloview website or product documentation for default username/password).

6.2. Encoding Mode (SDI to NDI)

In encoding mode, the N3-S converts an SDI input signal into an NDI stream on your network.

1. Connect your SDI source to the "SDI IN" port.
2. Få adgang til web interface and navigate to the encoding settings.
3. Configure the NDI stream parameters, such as NDI name, resolution, and audio settings.
4. The NDI stream will now be discoverable by NDI-compatible devices and software on your network.

6.3. Decoding Mode (NDI to SDI)

In decoding mode, the N3-S converts an NDI stream from your network back into an SDI signal.

1. Connect your SDI display or destination device to the "SDI OUT" port.
2. Få adgang til web interface and navigate to the decoding settings.
3. Select the desired NDI source from the list of available NDI streams on your network.
4. The NDI stream will be decoded and output as an SDI signal.

6.4. Tally Light Operation

The integrated tally light provides visual cues for live production:

• Grøn: Indicates the device is in preview mode.
• Rød: Indicates the device is in program (on-air) mode.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Undgå flydende rengøringsmidler eller opløsningsmidler.
• Firmwareopdateringer: Regularly check the Kiloview officiel website for firmware updates. Updates can improve performance, add features, and fix bugs. Follow the instructions provided with the firmware update package carefully.
• Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

Kiloview products typically come with a limited manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kiloview website. For technical support, firmware updates, or additional resources, please visit the Kiloview support side:

Kiloview Officiel Webwebsted

When contacting support, please have your product model number (KVW-N3-S) and serial number ready.