1. Introduktion
This manual provides essential instructions for the safe and effective use of your WEN Electric Hand Planer (Model 6534) and WEN Plate Joiner (Model JN8504). Please read this manual thoroughly before operating the tools to ensure proper function and to prevent injury. Keep this manual for future reference.
Figure 1: WEN Electric Hand Planer (Model 6534) and Plate Joiner (Model JN8504) Bundle.
2. Generelle sikkerhedsinstruktioner
Always follow basic safety precautions when using electric power tools to reduce the risk of fire, electric shock, and personal injury. This includes, but is not limited to:
- Læs alle instruktioner: Familiarize yourself with the tool's operation and potential hazards.
- Brug passende personlige værnemidler (PPE): Brug altid sikkerhedsbriller, høreværn og støvmaske.
- Fastgør emnet: Ensure the material being worked on is stable and cannot move unexpectedly.
- Hold arbejdsområdet rent og godt oplyst: Rodede eller mørke områder inviterer til ulykker.
- Undgå utilsigtet start: Sørg for, at kontakten er i slukket position, før du tilslutter værktøjet.
- Overdriv ikke: Oprethold korrekt fodfæste og balance til enhver tid.
- Afbryd strømmen: Tag altid stikket ud af værktøjet, før du foretager justeringer, skifter tilbehør eller udfører vedligeholdelse.
- Brug det rigtige værktøj til jobbet: Tving ikke et lille værktøj eller tilbehør til at udføre arbejdet som et kraftigt værktøj.
- Vedligehold værktøj med omhu: Hold skæreværktøjer skarpe og rene for bedre og sikrere ydeevne.
- Kontroller for beskadigede dele: Før brug skal du kontrollere for skæv justering eller fastbinding af bevægelige dele, brud på dele og andre forhold, der kan påvirke værktøjets funktion.
3. Komponenter overview
3.1 WEN 6534 Electric Hand Planer
Figure 2: WEN 6534 Electric Hand Planer, showing main body and handle.
- Power Switch with Safety Button: Activates the planer only when both are pressed, preventing accidental starts.
- Dybdejusteringsknap: Located at the front, allows precise control over cutting depth.
- Støvport: Connects to a dust collection system for a cleaner workspace. Features a two-way design for debris direction.
- Bladsamling: The cutting mechanism at the base of the planer.
- Base Plate Shoe: The flat surface that rests on the workpiece, includes V-shaped chamfer grooves.
- Stativ: Protects the blade and workpiece by elevating the blade when the tool is not in use.
- Rabbeting Guide: Assists in creating rabbets (grooves) along the edge of a board.
- Parallel Fence Bracket: Helps maintain a straight planing path.
3.2 WEN JN8504 Plate Joiner
Figure 3: WEN JN8504 Plate Joiner, including carrying case and wood biscuits.
- Motorhus: Indeholder de 8.5-amp motor.
- Håndtag: Til at gribe og styre værktøjet.
- Hegn: Adjustable guide for precise slot cutting, with angle settings from 0 to 90 degrees.
- Klinge: 4-inch carbide-tipped blade for cutting biscuit slots.
- Dybdestop: Pre-set stops for standard #0, #10, and #20 biscuits, or manual adjustment.
- Støvpose: Detachable bag for collecting sawdust.
- Bæretaske: Til opbevaring og transport.
- Wood Biscuits: Assorted sizes (#0, #10, #20) included for various joint types.
4. Opsætning
4.1 WEN 6534 Electric Hand Planer Setup
- Undersøg værktøjet: Before each use, check the planer for any damage, loose parts, or obstructions. Ensure the blade is securely fastened and sharp.
- Juster høvledybde:
Figure 4: Close-up of the depth adjustment knob on the WEN 6534 Hand Planer.
Rotate the front depth adjustment knob to select the desired cutting depth. The planer offers 16 positive stops, allowing adjustments from 0 to 1/8 inch in 1/128 inch intervals. Start with a shallow cut and gradually increase depth as needed.
- Connect Dust Collection (Optional): Attach a vacuum system to the dust port for efficient chip removal. The two-way dust port allows you to direct debris to either side by pressing the orange button.
- Install Rabbeting Guide or Parallel Fence (Optional): For specific cuts, attach the rabbeting guide or parallel fence bracket as per the instructions provided with the accessories.
4.2 WEN JN8504 Plate Joiner Setup
- Undersøg værktøjet: Verify that the blade is clean, sharp, and properly installed. Check for any loose components.
- Fastgør støvpose: Securely attach the provided dust bag to the dust port to collect sawdust during operation.
- Select Biscuit Size and Depth:
Figur 5: Side view of the WEN JN8504 Plate Joiner, highlighting the adjustable fence.
Use the depth stop mechanism to set the cutting depth for standard #0, #10, or #20 biscuits. For custom sizes, manual adjustment is possible.
- Adjust Fence Angle and Height: The fence can be adjusted from 0 to 90 degrees to accommodate various joint angles. Adjust the height to align the blade with the center of your workpiece thickness.
5. Betjeningsvejledning
5.1 WEN 6534 Electric Hand Planer Operation
- Tænd: To start the planer, press the safety button and then squeeze the power trigger. The planer will not activate if only the trigger is pressed.
Video 1: Demonstration of the WEN Hand Planer's safety button and power trigger, blade operation, and dust port adjustment.
- Høvleteknik:
- Placer høvlens forreste sko fladt på emnet.
- Start the motor, then slowly push the planer forward, maintaining even pressure.
- For consistent results, make several shallow passes rather than one deep cut.
- Utilize the V-shaped chamfer grooves on the base plate for easily flattening sharp post corners.
- The onboard kickstand will protect the blade and workpiece when the planer is set down between cuts.
- Stopping the Planer: Slip aftrækkeren for at stoppe motoren.
5.2 WEN JN8504 Plate Joiner Operation
- Marking Workpiece: Accurately mark the locations for biscuit slots on both pieces of wood to be joined.
- Positioning the Joiner:
Figur 6: Vinklet view of the WEN JN8504 Plate Joiner, demonstrating its compact design for various joint applications.
Align the joiner's fence with your marks and ensure it is stable against the workpiece. The adjustable fence allows for precise alignment for various joint types, including edge miter, corner, T, offset, frame, and edge-to-edge joints.
- Gør snittet: Turn on the joiner and firmly push the tool into the workpiece until the blade reaches the set depth. Allow the blade to stop completely before withdrawing the tool.
- Inserting Biscuits: Apply wood glue to the slots and biscuits, then insert the biscuits into the slots. Join the two pieces of wood together and clamp until the glue dries.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your WEN tools. Always disconnect the power cord before performing any maintenance.
- Rensning: After each use, clean both tools to remove sawdust and debris. Use a soft brush or compressed air. Do not use solvents that may damage plastic parts.
- Blade Inspection (Hand Planer): Regularly check the planer blades for sharpness and damage. Dull or chipped blades should be replaced promptly to ensure clean cuts and prevent motor strain.
- Blade Inspection (Plate Joiner): Inspect the carbide-tipped blade for wear or damage. A dull blade can lead to poor cut quality and increased effort. Replace as necessary.
- Ledningsinspektion: Periodically check the power cords for cuts, fraying, or other damage. Replace damaged cords immediately.
- Opbevaring: Store tools in their original carrying case (for the joiner) or a clean, dry place, out of reach of children.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet starter ikke. | No power, safety button not pressed (planer), damaged cord. | Check power outlet. Ensure safety button and trigger are pressed simultaneously (planer). Inspect power cord for damage. |
| Poor cutting quality (planer). | Dull or damaged blades, incorrect depth setting. | Replace or sharpen blades. Adjust planing depth to a shallower setting. |
| Inaccurate biscuit slots (joiner). | Incorrect fence adjustment, dull blade. | Re-adjust fence angle and height. Replace blade if dull. |
| Overdreven vibration eller støj. | Loose components, damaged blade, motor issue. | Tighten all fasteners. Inspect and replace damaged blades. If problem persists, contact WEN customer support. |
8. Specifikationer
8.1 WEN 6534 Electric Hand Planer
- Motor: 8 Amps
- Cuts Per Minute: Op til 32,000
- Klippebredde: 4-3/8 tommer
- Maksimal skæredybde: 1/8 tomme
- Dybdejustering: 16 positive stops (0 to 1/8 inch in 1/128 inch intervals)
- Funktioner: Two V-shaped chamfer grooves, onboard kickstand, two-way dust port, rabbeting guide, parallel fence bracket.
8.2 WEN JN8504 Plate Joiner
- Motor: 8.5 Amps
- Hastighed uden belastning: 10,000 RPM
- Bladets diameter: 4 inches (carbide-tipped)
- Hegnsjustering: 0 til 90 grader
- Biscuit Sizes: #0, #10, #20 (standard pre-set stops)
- Inkluderet tilbehør: Detachable dust bag, 24 #20 wood biscuits, 16 #10 wood biscuits, 10 #0 wood biscuits, blow mold carrying case.
9. Garanti og support
The WEN 6534 Electric Hand Planer is backed by a two-year warranty. For both the WEN 6534 Hand Planer and the WEN JN8504 Plate Joiner, WEN provides a friendly customer help line and a stocked inventory of replacement parts. For warranty claims, technical assistance, or to order replacement parts, please contact WEN customer support directly.
