Brugermanual til ANLAN varm og kold ansigtsskønhedsenhed

Indledning

The ANLAN Hot and Cold Facial Beauty Device is an 8-in-1 multi-functional skincare tool designed for home use. It integrates various technologies including hot and cold therapy, EMS (Electrical Muscle Stimulation), Ion cleansing and moisturizing, and LED light therapy to provide a comprehensive facial treatment experience.

Figure 1: ANLAN Hot and Cold Facial Beauty Device and included cotton sheets.

Sikkerhedsforanstaltninger

Læs venligst alle instruktioner omhyggeligt, inden du bruger enheden. Gem denne manual til senere brug.

• Brug ikke apparatet på beskadiget, irriteret eller inficeret hud.
• Kontakt en læge før brug, hvis du har eksisterende medicinske tilstande, er gravid eller har elektroniske implantater.
• Opbevar enheden utilgængeligt for børn.
• Enheden må ikke nedsænkes i vand, og den må ikke anvendes i meget fugtige omgivelser.
• Ensure your skin is adequately hydrated, especially when using EMS functions, to prevent discomfort or poor conductivity.
• Always start with the lowest intensity level when using EMS for the first time.
• Stop brugen, hvis du oplever ubehag eller bivirkninger.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• ANLAN Heating and Cooling Facial Device
• 150 sheets of cotton
• Ladekabel
• Instruktionsmanual

Opsætning

Opladning af enheden

1. Tilslut opladningskablet til enhedens opladningsport.
2. Sæt den anden ende af kablet i en kompatibel USB-strømadapter (medfølger ikke) eller en USB-port.
3. The battery indicator on the device screen will show charging status.
4. Oplad enheden helt før første brug.

Attaching Cotton Sheets (for Clean Mode)

1. Place one cotton sheet over the treatment head of the device.
2. Secure the cotton sheet with the provided cotton ring.
3. Apply your preferred lotion or cleansing solution to the cotton sheet.

Figure 2: Attaching a cotton sheet with the cotton ring for cleansing mode.

Betjeningsvejledning

Generel drift

• Tænd/sluk: Tryk og hold tænd/sluk-knappen (U symbol) to turn the device on or off.
• Valg af tilstand: Short press the power button to cycle through different modes (Clean, Cool, EMS Lifting, Moisturizing, Cold Synthesis). The current mode will be displayed on the screen.
• Vibrationsfunktion: Press and hold the (-/+) button to toggle the vibration function on or off within a selected mode.
• Intensity Level Adjustment: Short press the (-/+) button to adjust the intensity level (3 levels available for EMS).
• LED Light Selection: Press the LED button to switch between Red and Blue LED light therapy.

Figure 3: Device screen displaying various operational modes.

Specific Mode Functions

1. Hot & Cooling Function

This function allows for temperature control to enhance skincare. The hot mode ranges from 38°C to 42°C, while the cooling mode ranges from 6°C to 12°C. Select the desired temperature based on your skin's needs and the season.

Figure 4: Hot (38-42°C) and Cold (6-12°C) therapy modes for pore care.

2. Ion Facial Beautifying Device (Clean & Moisturizing Modes)

• Rens tilstand: Use with a cotton ring holding a cotton sheet soaked in lotion. This mode helps to deeply cleanse pores.
• Moisturizing Mode: Use with your preferred lotion or sheet mask to enhance absorption of skincare products.

Figure 5: Ion+ (cleansing) and Ion- (moisturizing) functions.

3. EMS (Electrical Muscle Stimulation) Function

The device features 3 adjustable EMS levels. Always begin with Level 1, especially during your first use, to allow your skin to adapt. Ensure your skin is fully hydrated with serum or moisturizing gel before using EMS, as dry skin can lead to poor conductivity and reduced vibration. Make sure to touch the silver induction sight bar on the handle and ensure the electrode head has full contact with your skin for optimal performance.

4. LED Light Therapy

The device incorporates LED light therapy with different light colors for various skin benefits:

• Rødt lys: Typically used for promoting skin rejuvenation and improving skin elasticity.
• Blåt lys: Often used for calming skin and addressing specific skin concerns.

Figure 6: Red and Blue LED light therapy functions.

Brugsvejledning

After washing your face as usual, apply your preferred skincare product (e.g., serum, lotion, or sheet mask) to your skin. Select the desired mode and intensity on the device. Gently glide the treatment head over your face, ensuring full contact with the skin. Follow the specific instructions for each mode as described above.

Opretholdelse

Rengøring af enheden

1. Sørg for, at enheden er slukket og taget ud af stikkontakten før rengøring.
2. Wipe the treatment head and body of the device with a soft, damp klæde.
3. Brug ikke slibende rengøringsmidler, alkohol eller stærke kemikalier.
4. Sørg for, at enheden er helt tør, før den opbevares eller genoplades.

Opbevaring

Opbevar enheden et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Opbevar den i den originale emballage eller et beskyttende etui for at forhindre skader.

Fejlfinding

Specifikationer

Garanti og support

For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.