Cecotec Conga 11090 Spin Revolution Home&Wash T robotstøvsuger brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient use of your Cecotec Conga 11090 Spin Revolution Home&Wash T robot vacuum cleaner. Please read this manual thoroughly before operating the device and retain it for future reference.

The Conga 11090 Spin Revolution Home&Wash T is a robot vacuum and mop equipped with laser technology and an automatic self-emptying and self-cleaning base. It is designed for comprehensive floor cleaning, including vacuuming dust and mopping with rotating pads.

2. Sikkerhedsinstruktioner

For at mindske risikoen for personskade eller beskadigelse skal du overholde følgende sikkerhedsforanstaltninger:

• Sørg for, at strømforsyningen voltage matcher klassificeringsmærkatet på opladningsbasen.
• Do not operate the robot in wet environments or near flammable materials.
• Hold børn og kæledyr væk fra robotten under drift.
• Do not use the robot to pick up large debris, sharp objects, or liquids other than water for mopping.
• Regularly inspect the power cord and plug for damage.
• Brug kun originalt tilbehør og reservedele.
• Avoid blocking the robot's sensors or charging contacts.
• Do not attempt to repair or modify the robot yourself. Contact authorized service personnel.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1x robotstøvsuger
• 1x Self-emptying and Self-cleaning Base with 2 tanks (clean water and dirty water)
• 1x Dust Bag (pre-installed in the base)
• 1x sidebørste
• 2x Rotating Mop Pads (pre-installed)
• 1x strømkabel
• 1x Self-cleaning Brush (for maintenance)
• 1x Multifunction Brush
• 1x brugsanvisning

4. Produktet er slutview

The Cecotec Conga 11090 Spin Revolution Home&Wash T integrates advanced features for automated home cleaning.

Figur 4.1: The Cecotec Conga 11090 robot vacuum cleaner docked in its self-emptying and self-cleaning base. The base features three compartments for dust, clean water, and dirty water.

4.1 Robotkomponenter

Figur 4.2: Top view of the robot, showing the power/clean button and home button. The laser navigation system is visible on top.

Figur 4.3: Underside of the robot, illustrating the main brush, side brush, and two rotating mop pads for effective cleaning.

4.2 Selvtømmende og selvrensende bund

Figur 4.4: Top view of the base, showing the three distinct tanks: a 2.5L dust tank, a 2.8L clean water tank, and a 2.4L dirty water tank.

The base automatically empties the robot's dustbin and cleans/dries the mop pads. It features automatic detection for a full dust bag or empty/full water tanks, providing alerts as needed.

5. Opsætning

5.1 Placering af ladestation

• Place the self-emptying and self-cleaning base against a wall in an open area.
• Ensure there is at least 0.5 meters of clear space on both sides of the base and 1.5 meters in front.
• Tilslut strømkablet til basen, og sæt det i en stikkontakt.
• Sørg for, at rentvandstanken er fyldt, og at snavsevandstanken er tom.
• Confirm a dust bag is correctly installed in the base.

5.2 Indledende opladning

Place the robot onto the charging base. Ensure the charging contacts align. The robot will begin charging automatically. For first use, allow the robot to fully charge before operation.

5.3 Appinstallation og -forbindelse

• Download the "CECOTEC" app (OS app System 3.0) from your mobile device's app store.
• Follow the in-app instructions to register an account and add your Conga 11090 robot.
• The app will guide you through connecting the robot to your home Wi-Fi network (2.4 GHz).

Figur 5.1: A user controlling the robot vacuum cleaner via the Cecotec mobile application, which offers various cleaning modes and settings.

6. Betjening

6.1 Start af en rengøringscyklus

• Via robotknapper: Press the power button on the robot to start a general cleaning cycle.
• Via mobilapp: Use the CECOTEC app to initiate cleaning. The app allows for more advanced control, including selecting specific rooms, setting cleaning modes, and adjusting suction/water levels.

6.2 Lasernavigation og kortlægning

The robot uses laser technology for precise navigation and mapping of your home. During its first cleaning cycle, it will create a detailed map, which can be viewredigeret og tilpasset i appen.

Figur 6.1: The robot utilizing its laser navigation system to efficiently map and clean the environment, avoiding obstacles.

6.3 Automatiske funktioner

• Total Surface Cleaning: If the battery runs low during a cleaning cycle, the robot returns to its base to recharge, then resumes cleaning from where it left off.
• Water Surface Cleaning: During mopping, if the mop pads become dry, the robot returns to its base to re-humidify them before continuing the mopping task.
• Customizable Mopping: Adjust the mop pad cleaning time (10, 15, or 20 minutes) and the frequency of automatic dust emptying (after one, two, or three cleaning cycles) via the app.

Figur 6.2: The robot actively mopping a floor, demonstrating its ability to clean various types of spills and dirt.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din robotstøvsuger.

7.1 Self-Emptying Base Maintenance

• Udskiftning af støvpose: The base will alert you when the dust bag is full. Replace it with a new one to maintain optimal dust collection.
• Water Tank Management: Regularly empty the dirty water tank and refill the clean water tank. The base provides alerts for these actions.
• Rengøring af moppepuder: The base automatically cleans the mop pads. Ensure the clean water tank is filled for this process.

Figur 7.1: En intern view of the self-emptying and self-cleaning base, illustrating the water circulation for mop pad cleaning and the dust collection system.

7.2 Robot Component Cleaning

• Hovedbørste: Remove and clean the main brush regularly using the provided self-cleaning brush. Remove any tangled hair or debris.
• Sidebørste: Check the side brush for wear and tear. Replace if damaged. Clean any hair or debris caught around it.
• Moppepuder: Although self-cleaned by the base, periodically remove and hand-wash the rotating mop pads for thorough cleaning.
• Sensorer og opladningskontakter: Wipe the robot's sensors and charging contacts, as well as the base's charging contacts, with a dry cloth to ensure proper function.

8. Fejlfinding

If you encounter issues with your robot vacuum cleaner, refer to the following common problems and solutions.

For further assistance, consult the CECOTEC app or contact customer support.

9. Specifikationer

10. Garanti og support

Cecotec offers a commitment to spare parts availability for 10 years. For warranty claims, technical support, or to purchase replacement parts, please contact Cecotec customer service through their official website or the CECOTEC app.

Gem din købskvittering som købsbevis af garantihensyn.