GGM Gastro Tabletop Refrigerated Display Case User Manual

1. Produktet er slutview

The GGM Gastro TKVGNR120 is a compact and efficient tabletop refrigerated display case designed for commercial use, ideal for showcasing fresh food items, beverages, and snacks. It features a modern design with LED lighting and double-glazed glass for optimal product visibility and insulation.

Figur 1.1: Forside view of the GGM Gastro TKVGNR120 refrigerated display case, showcasing its contents and sleek design.

Nøglefunktioner:

• Optimal Cooling Performance: Maintains a temperature range of 0 °C to 12 °C, suitable for various fresh products.
• Alsidig opbevaring: Equipped with two adjustable chromed shelves for flexible organization.
• Høj energieffektivitet: Features a ventilated cooling system and R600a refrigerant for eco-friendly operation.
• Elegant design: Modern aesthetic with bright LED lighting and clear double-glazed glass sliding doors.
• Robust konstruktion: Durable build with double-glazed glass on all sides for enhanced insulation and longevity.

2. Sikkerhedsinstruktioner

Before operating the appliance, please read all safety instructions carefully to prevent injury and damage. Keep this manual for future reference.

Generel sikkerhed:

• Sørg for, at apparatet er placeret på en stabil, plan overflade.
• Bloker ikke ventilationsåbninger.
• Brug ikke mekaniske anordninger eller andre midler til at fremskynde afrimningsprocessen, ud over dem, der anbefales af producenten.
• Beskadig ikke kølemiddelkredsløbet.
• Dette apparat er kun beregnet til kommerciel brug.
• Hold børn væk fra apparatet.

Elektrisk sikkerhed:

• Connect the appliance only to a properly grounded power outlet.
• Betjen ikke apparatet med en beskadiget netledning eller stik.
• Tag altid stikket ud af stikkontakten før rengøring eller vedligeholdelse.
• Sørg for, at strømforsyningen matcher voltage specified on the rating label (220-240V / 50Hz).

3. Opsætning og installation

Proper setup is crucial for the optimal performance and longevity of your refrigerated display case.

Udpakning:

1. Tag forsigtigt apparatet ud af emballagen.
2. Inspect for any shipping damage. Report any damage immediately to the carrier and supplier.
3. Fjern alle emballagematerialer, tape og beskyttelsesfilm.

Placering:

• Place the display case on a firm, level surface capable of supporting its weight when fully loaded.
• Ensure adequate ventilation around the unit. Maintain a minimum clearance of 10 cm (4 inches) from walls or other obstructions on all sides, especially the rear where the compressor is located.
• Avoid direct sunlight or proximity to heat sources (e.g., ovens, radiators) as this will affect cooling efficiency.
• Må ikke installeres i områder med høj luftfugtighed.

Figure 3.1: Dimensions of the display case for proper placement. Width: 70.2 cm, Depth: 56.8 cm, Height: 68.6 cm.

Hyldemontering:

The display case comes with two adjustable chromed shelves. Follow these steps to install them:

1. Find hyldestøttebeslagene inde i skabet.
2. Insert the shelf brackets into the desired slots on the side rails. Ensure they are level and securely seated.
3. Carefully slide the chromed shelves onto the installed brackets.

Figure 3.2: Details of the shelf support brackets for easy adjustment and installation.

Elektrisk tilslutning:

• Before plugging in, allow the unit to stand upright for at least 2 hours if it was transported horizontally. This allows the refrigerant to settle.
• Plug the appliance into a dedicated, grounded 220-240V / 50Hz power outlet.
• Brug ikke forlængerledninger eller adaptere.

4. Betjeningsvejledning

Indledende opstart:

1. After plugging in, the display case will power on.
2. The digital temperature control panel, typically located at the rear (see Figure 4.1), will display the current internal temperature.
3. Allow the unit to run empty for at least 2-4 hours to reach the desired operating temperature before loading products.

Figur 4.1: Bagside view of the display case, showing the digital temperature control panel and power switch.

Temperaturkontrol:

• The display case features a digital temperature controller. Refer to the specific controller's manual (if provided separately) for detailed programming instructions.
• Typically, buttons for "SET", "UP", and "DOWN" allow adjustment of the desired temperature.
• The recommended operating temperature range is 0 °C to 12 °C.

Indlæser produkter:

• Load products evenly on the shelves. Do not overload the shelves.
• Ensure products do not block the internal air circulation vents.
• Keep the sliding doors closed as much as possible to maintain internal temperature and energy efficiency.

Figur 4.2: Interiør view of the display case with empty shelves, showing ample space for product arrangement.

LED belysning:

The display case is equipped with internal LED lighting to enhance product visibility. The lighting is typically controlled by a switch on the control panel or a dedicated button.

Figure 4.3: Detail of the energy-efficient LED lighting strip, illuminating the display area.

5. Vedligeholdelse og rengøring

Regular maintenance and cleaning will ensure the longevity and hygienic operation of your display case.

Daglig rengøring:

• Afbryd strømmen: Tag altid stikket ud af stikkontakten før rengøring.
• Indre: Wipe down interior surfaces, shelves, and glass with a soft cloth dampened with mild soap and water. Rinse with a clean damp klud og tør grundigt.
• Ydre: Clean exterior surfaces with a soft cloth and mild detergent. Avoid abrasive cleaners or solvents.
• Glasdøre: Use a glass cleaner for streak-free results.

Weekly/Monthly Maintenance:

• Kondensatorspole: Periodically clean the condenser coil (located near the compressor at the rear/bottom of the unit) using a soft brush or vacuum cleaner. A dirty condenser coil reduces efficiency and can lead to compressor failure.
• Afløbspande: Check and clean the drain pan (if accessible) to prevent water overflow and odors.
• Dørpakninger: Inspect door gaskets for cracks or damage. Clean them with warm soapy water to ensure a tight seal.

afrimning:

This unit features an automatic defrost system. However, if excessive ice buildup occurs, manual defrosting may be necessary:

1. Remove all products from the display case.
2. Tag stikket ud af stikkontakten.
3. Leave the doors open to allow ice to melt naturally. Do not use sharp objects or heating devices to remove ice.
4. Når enheden er optøet, skal den rengøres og tørres grundigt indvendigt, inden den tilsluttes igen og produkter fyldes i igen.

6. Fejlfinding

Før du kontakter service, bedes du kontrollere følgende almindelige problemer og løsninger:

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte GGM Gastro kundesupport.

7. Specifikationer

8. Garanti og support

GGM Gastro products are manufactured to high-quality standards and come with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.

Kundesupport:

For technical assistance, spare parts, or warranty claims, please contact GGM Gastro customer support:

• Webwebsted: www.ggmgastro.com (Se lokale kontaktoplysninger)
• When contacting support, please have your model number (TKVGNR120) and purchase date ready.