1. Introduktion
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your MOUNTUP Corner TV Wall Mount, model MU0057-07. This full-motion bracket is designed to securely hold most 26-65 inch TVs, offering smooth swivel, tilt, and extension capabilities for optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.
Figure 1.1: The MOUNTUP Corner TV Wall Mount MU0057-07, including the wall plate, articulating arms, VESA plate, and included accessories like a level and cable ties.
2. Sikkerhedsoplysninger
ADVARSEL: Failure to read and follow all instructions, cautions, and warnings in this manual may result in personal injury, property damage, or voiding of your warranty. If you have any questions, please contact customer support.
- Do not install this product on drywall alone. It must be mounted to a wood stud or concrete/brick wall.
- Sørg for, at vægkonstruktionen sikkert kan bære den samlede vægt af beslaget og dit tv.
- Overskrid ikke den maksimale vægtkapacitet på 35 kg.
- Do not exceed the maximum VESA pattern of 400x400mm.
- Use all provided hardware. Do not use damaged parts.
- Brug altid en stolpesøger til at finde træstolper præcist.
- Two people are recommended for installation to ensure safety and ease of handling.
- Hold børn væk fra installationsområdet under opsætningen.
3. Pakkens indhold
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact MOUNTUP customer support.
Figure 3.1: Diagram showing the main components of the TV mount: the arm and wall plate assembly (01), the VESA plate (02), and extenders (3A, 3B) for larger VESA patterns.
- Wall Plate and Arm Assembly (x1)
- TV VESA Plate (x1)
- VESA Extenders (x2 sets, for larger VESA patterns)
- Hardware Kit (various screws, washers, spacers for TV and wall mounting)
- Bubble Level (x1)
- Kabelbinder (x3)
- Installationsskabelon (x1)
4. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | MONTERING |
| Modelnummer | MU0057-07 |
| Kompatibel tv-størrelse | 26 - 65 tommer |
| Maksimal belastningskapacitet | 77 lbs (35 kg) |
| VESA-kompatibilitet | Min 100x100mm to Max 400x400mm |
| Monteringstype | Wall Mount (Single Stud, Concrete/Brick Wall) |
| Bevægelsestype | Full Motion (Swivel, Tilt, Extend/Retract) |
| Extension Arm Length | Op til 29.5 tommer (750 mm) |
| Tilt vinkel | +5° til -15° |
| Drejevinkel | Op til 180° (afhængigt af TV-størrelse) |
| Niveaujustering | ±3° |
| Materiale | Metal |
| Farve | Sort |
5. Opsætning og installation
Careful planning and execution are crucial for a secure installation. Please follow these steps precisely.
5.1 Kontrol før installation
- TV-kompatibilitet: Ensure your TV's size (26-65 inches) and weight (under 77 lbs) are within the mount's limits.
- VESA mønster: Check the VESA mounting holes on the back of your TV. This mount supports VESA patterns from 100x100mm to 400x400mm.
- Vægtype: Identify your wall type. This mount is suitable for wood studs and solid concrete/brick walls. Do not mount on drywall alone.
Figure 5.1: Visual guide for checking your TV's VESA pattern (horizontal x vertical distance between mounting holes) and suitable wall types (wood stud, concrete/brick wall).
Figure 5.2: Illustration of compatible wall types: Wood Stud, and Concrete Wall/Brick Wall (requires anchors, not included). Drywall alone is not suitable.
5.2 Installationstrin
- Attach the TV Plate to your TV:
Carefully place your TV face down on a soft, clean surface. Attach the VESA plate (02) to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. If your TV's VESA pattern is larger than 200x200mm, you may need to attach the extenders (3A, 3B) to the VESA plate first.
Figure 5.3: Step-by-step visual of attaching the TV plate to the back of the television.
- Monter vægpladen:
Determine the desired height for your TV. Use a stud finder to locate a wood stud. Mark the drilling points using the provided template. For wood studs, pre-drill pilot holes and secure the wall plate assembly (01) using the lag bolts. For concrete/brick walls, use a masonry drill bit, insert concrete anchors (not included), and then secure the wall plate.
- Hang the TV to the Wall Plate:
With assistance, carefully lift the TV with the attached VESA plate and hook it onto the wall plate assembly. Ensure the TV is securely seated. Tighten any safety screws or locking mechanisms on the VESA plate to prevent accidental dislodging.
6. Betjeningsvejledning
Your MOUNTUP TV wall mount offers versatile adjustments to achieve the perfect viewoplevelse.
6.1 Adjusting Tilt and Level
- Justering af hældning: The mount allows for a tilt range of +5° to -15°. Loosen the tilting adjustment screws on the VESA plate, adjust the TV to your desired vertical angle, and then securely tighten the screws.
- Niveaujustering: Fine-tune the horizontal level of your TV by adjusting the level adjustment screws on the VESA plate. This allows for a ±3° rotation to ensure your TV is perfectly straight after installation.
Figure 6.1: Illustration demonstrating the easy level adjustment (±3°) and tilting adjustment (+5° to -15°) features of the mount.
6.2 Drejning og forlængelse
- Udvidelse: The dual articulating arms allow the TV to extend up to 29.5 inches (750mm) from the wall, providing ample space for adjustments and access to cables.
- Tilbagetrækning: The mount can retract to approximately 3 inches from the wall for a low-profile appearance when not extended.
- Drejelig: The mount offers up to 180° of swivel (left to right), depending on the size of your TV and its distance from the wall. This allows you to angle the TV towards different viewing areas in a room, including corner installations.
Figure 6.2: The long arm full motion capability, showing the mount extended up to 29.5 inches (750mm) from the wall.
Figure 6.3: The double arm folding design, illustrating how the mount allows the screen to cross the wall, ideal for corner installations or viewing from adjacent rooms.
Figur 6.4: Et example of the mount's flexible arm folding, making it perfect for corner installations, maximizing space and viewmuligheder.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or frequent adjustments may cause them to loosen slightly.
- Smøring: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the pivot points. Avoid oil-based lubricants that may attract dust.
8. Fejlfinding
If you encounter issues with your MOUNTUP TV wall mount, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater efter installation. | Niveaujusteringsskruerne er løse eller ikke korrekt indstillet. | Adjust the level adjustment screws on the VESA plate (refer to Section 6.1). Use the included bubble level for accuracy. |
| Mount arms are stiff or difficult to move. | Joints may be too tight or require lubrication. | Check the tightness of the bolts at the pivot points. If too tight, slightly loosen them. Apply a small amount of silicone-based lubricant if needed. |
| TV'et ser ud til at hænge eller vippe uventet. | Tilt adjustment screws are loose, or TV weight exceeds capacity. | Ensure tilt adjustment screws are securely tightened. Verify your TV's weight does not exceed 77 lbs. |
| Mount feels unstable on the wall. | Improper installation, loose lag bolts, or unsuitable wall type. | Re-check all wall mounting bolts for tightness. Ensure the mount is secured to a wood stud or concrete/brick wall as per instructions. If unsure, consult a professional installer. |
9. Garantioplysninger
MOUNTUP products are manufactured with quality and durability in mind. For specific warranty details regarding your MU0057-07 TV wall mount, please refer to the warranty card included in your package or visit the official MOUNTUP webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
10. Kundesupport
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact MOUNTUP customer support. Our experts are available to provide comprehensive assistance.
- Webwebsted: Visit the MOUNTUP Store on Amazon
- E-mail: (Refer to product packaging or official website for email contact)
- Telefon: (Refer to product packaging or official website for phone contact)
Please have your model number (MU0057-07) and purchase date ready when contacting support.
