Indledning
Tak for købetasing the KOSUMOSU 3D LED Digital Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience. Keep this manual for future reference.
Sikkerhedsoplysninger
- Ensure the power adapter (not included) is 5V/1A. Using an incorrect adapter may damage the device.
- Keep the clock away from water and high humidity environments.
- Forsøg ikke at skille uret ad eller reparere det selv. Kontakt kvalificeret servicepersonale.
- Avoid placing the clock in direct sunlight or near heat sources to prevent overheating.
- Handle the remote control and its battery with care. Keep button batteries out of reach of children.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- KOSUMOSU 3D LED Digital Clock (9.7 inches)
- Remote Control (with CR2025 button battery included)
- 3-meter USB Power Cable
- Desk Stand Bracket
- Wall Mounting Accessories (screws, anchors)
- Brugervejledning (dette dokument)
Image: The KOSUMOSU 3D LED Digital Clock with its remote control, showcasing its modern design and warm light display.
Image: A visual representation of the KOSUMOSU 3D LED Digital Clock's package contents, including the clock, remote, USB cable, and mounting hardware.
Produkt overview
The KOSUMOSU 3D LED Digital Clock features a large, clear display with warm light, suitable for various rooms. It includes a remote control for easy adjustments and offers multiple display modes.
Nøglefunktioner:
- Large 3D LED Display: 9.7 inches for clear visibility.
- Fjernbetjening: Juster bekvemt indstillinger på afstand.
- Justering af lysstyrke: 3 manual levels (High/Medium/Low) and 8 automatic levels via built-in light sensor.
- Multifunktionsskærm: Shows time, date, and temperature (℃/℉).
- Alarm med snooze: Customizable alarm with a 5-minute snooze function.
- 12/24 timers tilstand: Skift nemt mellem tidsformater.
- Alsidig placering: Can be used as a desk clock with the included stand or wall-mounted.
Image: The KOSUMOSU 3D LED Digital Clock showcasing its ability to display time, date, and temperature, highlighting its multi-functional capabilities.
Opsætning
1. Strømtilslutning
- Connect the provided 3-meter USB power cable to the clock's power input port.
- Plug the other end of the USB cable into a 5V/1A AC adapter (not included).
- Plug the AC adapter into a standard wall outlet. The clock display will light up.
Note: The built-in super farad capacitor provides approximately 2 hours of time memory during power failure; it does not power the clock for regular operation.
2. Fjernbetjeningsbatteri
The remote control comes with a CR2025 button battery pre-installed. If the remote does not respond, check or replace the battery.
Billede: Et nærbillede view of the remote control, indicating the location of the CR2025 button battery for operation.
3. Placeringsmuligheder
Skrivebordsplacering:
Attach the included desk stand bracket to the bottom of the clock for stable placement on any flat surface, such as a desk, bedside table, or shelf.
Vægmontering:
The clock features a wall-mounted hanging hole. Use the provided screws and anchors to securely mount the clock on a wall. Ensure the power cable can reach an outlet.
Image: The KOSUMOSU 3D LED Digital Clock displayed as a wall-mounted unit, illustrating its versatility in placement.
Betjeningsvejledning
All settings are controlled via the remote control.
1. Indstilling af tid og dato
- Tryk på SÆT button on the remote control to enter setting mode.
- Brug UP (▲) og NED (▼) buttons to adjust the value.
- Trykke SÆT again to confirm and move to the next setting (e.g., Hour → Minute → Year → Month → Day).
- Once all settings are complete, the clock will return to normal display.
2. 12/24 timers tilstand
Tryk på 12/24H button on the remote control to switch between 12-hour and 24-hour time formats.
3. Justering af lysstyrke
Automatisk dæmpning:
The clock has a built-in light sensor that automatically adjusts brightness across 8 levels based on ambient light conditions. This feature is enabled by default.
Manuel dæmpning:
Tryk på LYST button on the remote control to cycle through 3 manual brightness levels: High, Medium, Low. Pressing it again will return to automatic dimming mode.
Image: Illustration of the KOSUMOSU 3D LED Digital Clock's dimming capabilities, demonstrating both automatic adjustment via a light sensor and manual control with three brightness levels.
4. Alarm funktion
- Tryk på ALARM knappen på fjernbetjeningen for at gå ind i alarmindstillingstilstand.
- Brug UP (▲) og NED (▼) buttons to set the desired alarm time.
- Trykke ALARM igen for at bekræfte alarmtidspunktet.
- For at aktivere/deaktivere alarmen skal du trykke på ON/OFF button (often shared with the alarm icon). An alarm icon will appear on the display when active.
Snooze-funktion:
When the alarm rings, press any button on the remote (except ON/OFF or MAGT) to activate the snooze function. The alarm will pause for 5 minutes and ring again. This can be repeated up to 3 times.
5. Loop Display (Time, Date, Temperature)
The clock can cycle through displaying time, date, and temperature. Press the LOOP button (often indicated by a refresh icon) on the remote control to enable or disable this feature.
Image: The KOSUMOSU 3D LED Digital Clock demonstrating its loop display feature, cycling between showing the current time, date, and temperature.
Opretholdelse
- Rensning: Use a soft, dry cloth to wipe the clock's surface. Do not use abrasive cleaners or solvents.
- Magt: Disconnect power before cleaning or if the clock will not be used for an extended period.
- Fjernbetjening: Replace the CR2025 battery in the remote control when its range decreases or it stops responding.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Clock does not light up. | No power supply; incorrect adapter; loose connection. | Ensure 5V/1A AC adapter is connected and plugged in. Check USB cable connection. |
| Fjernbetjening virker ikke. | Battery drained; remote not pointed at clock; obstruction. | Replace CR2025 battery. Point remote directly at the clock. Remove any obstructions. |
| Skærmen er for svag/lys. | Automatic dimming active; manual setting needed. | Tryk på LYST button on the remote to adjust manually or return to auto mode. |
| Alarmen lyder ikke. | Alarm not activated; volume too low (not applicable for this model). | Ensure the alarm is set and activated using the remote control. |
| Time/Date incorrect after power outage. | Power outage exceeded capacitor memory. | Reset time and date using the remote control. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | KOSUMOSU |
| Modelnummer | 9.7IN Digital Clock-ACD310Y |
| Display Type | Digital LED |
| Produktdimensioner | 9.7 cm B x 3.9 cm H x 0.9 cm D |
| Varens vægt | 5.1 ounce (146 g) |
| Strømkilde | Corded Electric (5V/1A AC adapter, not included) |
| Batteri (til fjernbetjening) | 1 CR2025 (inkluderet) |
| Tidshukommelse | Built-in super farad capacitor (approx. 2 hours) |
| Lysstyrkekontrol | 8-level auto dimming, 3-level manual dimming (High/Medium/Low) |
| Særlige funktioner | Alarm with Snooze, Temperature Display (℃/℉), Date Display, 12/24H Mode, Remote Control |
| Monteringstype | Desk Clock, Wall Mount |
| Materiale | Plast (acrylonitrilbutadienstyren) |
Image: A detailed diagram showing the dimensions and key specifications of the KOSUMOSU 3D LED Digital Clock, including its weight and power requirements.
Garanti og support
KOSUMOSU provides a 2 års garanti for this product. If you encounter any quality or operational issues with your KOSUMOSU 3D LED Digital Clock, please contact our customer service team. We are committed to providing support, guidance, and replacements as needed.
For assistance, please refer to the contact information provided on the product packaging or the official KOSUMOSU webwebsted.
