1. Introduktion og overview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Nøglefunktioner omfatter:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobil strømforsyning: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED Light Functions: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Opsætning og første brug
2.1 Opladning af enheden
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Betjeningsvejledning
3.1 Jumpstart af et køretøj
- Sørg for, at jumpstarteren er fuldt opladet.
- Tilslut smart batteri clamp to the jump starter.
- Fastgør den røde (+) clamp til den positive pol på køretøjets batteri.
- Fastgør den sorte (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Start køretøjets motor.
- Når køretøjet starter, skal du straks fjerne klampen.amps from the vehicle battery, then disconnect the smart battery clamp fra jumpstarteren.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Brug af luftkompressoren
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Brug som powerbank
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB-udgang 1: 5V=3A, 9V=2A, 12V=1.5A
- USB-udgang 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 LED-lysfunktioner
The device includes multiple LED light modes:
- Stabilt lys: Til generel belysning.
- SOS-tilstand: Til nødsignalering.
- Strobe lys: For at tiltrække opmærksomhed.
Press the light button to cycle through the different modes.
4. Vedligeholdelse
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Almindelig opladning: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- Opbevaring: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke skrappe kemikalier eller slibende materialer.
- Kabelinspektion: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Fejlfinding
Se tabellen nedenfor for almindelige problemer og løsninger på disse:
| Fejlmeddelelse | Årsag | Løsning |
|---|---|---|
| FEJL | Jumper cables connected with reversed polarity to the car battery. | Tilslut batteriet clamps to the correct positive and negative terminals. |
| LAV | Korrekt tilsluttet bilbatteri, men batteri voltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| UDE I | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| STARTE | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| STARTE | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Specifikationer
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parameter | Værdi |
|---|---|
| Produktnavn | Jumpstarter med luftkompressor |
| Model | ENT-TD6000 |
| Størrelse | 193 x 110 x 53 mm |
| Inflationstrykområde | 0.2-8bar / 3-120psi |
| Driftstemperatur | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Opbevaringstemperatur | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Batterikapacitet | 41.44Wh (14.8V, 2.8Ah) |
| Arbejdsstøj | Mindre end 80dB væk fra 1 meter |
| Opladningsindgang | 5V=3A |
| Opladningstid | Cirka 3.5 timer |
| USB-udgang 1 | 5V=3A, 9V=2A, 12V=1.5A |
| USB-udgang 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1 psi |
| Start Car Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Vigtige sikkerhedsadvarsler
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Oplad kun det interne batteri i et godt ventileret område.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Risiko for personskade. Brug ikke dette produkt, hvis netledningen eller batterikablerne er beskadiget på nogen måde.
- Denne enhed er ikke beregnet til brug i et kommercielt reparationsanlæg.
- Denne enhed er beregnet til at blive opbevaret indendørs, når den ikke er i brug. Denne enhed må ikke opbevares eller efterlades udendørs, når den ikke er i brug.
- Denne enhed er beregnet til midlertidig brug udendørs, og der bør udvises rimelig forsigtighed, når du bruger denne enhed under våde forhold.
8. Garanti og support
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
