Merax Queen polstret platformseng med 4 skuffer brugsanvisning

1. Sikkerhedsoplysninger

Læs venligst alle instruktioner omhyggeligt inden montering og brug. Gem denne manual til senere brug.

• Sørg for, at alle dele er til stede og ubeskadigede, før monteringen påbegyndes. Må ikke anvendes, hvis der mangler eller er ødelagte dele.
• Saml sengen på en blød, ren overflade for at forhindre ridser.
• Tighten all bolts and screws firmly, but do not overtighten. Periodically check and re-tighten all connections.
• Overskrid ikke den anbefalede vægtkapacitet for sengerammen.
• Hold små dele og emballagematerialer væk fra børn.
• Dette produkt er kun beregnet til indendørs brug.

2. Pakkens indhold

Bekræft, at alle komponenterne nedenfor er inkluderet i din pakke:

• Polstret sengegavl
• Polstrede sideheste (2)
• Polstret fodbræt
• Bed Slats and Center Support System
• Opbevaringsskuffer (4)
• Hardwarepakke (bolte, skruer, skiver, unbrakonøgle)

Image: The Merax Queen Upholstered Platform Bed with its classic headboard and four storage drawers, shown in a bedroom setting.

3. Opsætningsvejledning

Follow these steps for proper assembly of your Merax platform bed.

Step 3.1: Attach Headboard to Side Rails

Connect the upholstered headboard to the side rails using the provided bolts and washers. Ensure the connections are secure.

Billede: Et nærbillede view illustrating the connection point where the upholstered headboard attaches to the bed frame's side rail, showing the pre-drilled holes and hardware.

Step 3.2: Attach Footboard to Side Rails

Similarly, attach the upholstered footboard to the other end of the side rails. Confirm all four corners are aligned and securely fastened.

Trin 3.3: Installer centerstøtte og lameller

Place the center support beam(s) and then evenly space and secure the wooden slats across the bed frame. The slats provide mattress support and eliminate the need for a box spring.

Billede: Et overheadbillede view of the bed frame's interior, showcasing the wooden slats laid across the frame and the underlying structure for the storage drawers.

Step 3.4: Assemble and Insert Drawers

Assemble the four storage drawers according to the separate drawer assembly instructions (if provided). Once assembled, slide them into the designated spaces beneath the bed frame. The drawers are designed to roll smoothly on their casters.

Image: A single upholstered storage drawer, shown partially extended from beneath the bed frame, highlighting its construction and casters.

Image: The Merax platform bed with all four storage drawers fully extended, demonstrating the available storage space beneath the bed.

4. Betjeningsvejledning

De fire opbevaringsskuffer er designet til nem adgang og organisering.

• To open a drawer, gently pull the upholstered front panel outwards. The casters will allow it to roll smoothly.
• To close a drawer, push the panel inwards until it is flush with the bed frame.
• Avoid placing excessively heavy items in the drawers to ensure smooth operation and prevent damage to the casters or drawer structure.

5. Vedligeholdelse

Proper care will extend the life and appearance of your Merax platform bed.

• Rensning: The upholstered fabric should be dry cleaned only. For minor spills, blot immediately with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Hardwarekontrol: Kontrollér regelmæssigt alle bolte og skruer for at sikre, at de forbliver stramme. Spænd dem efter behov for at opretholde stabiliteten.
• Skuffepleje: Keep the area beneath the bed clear of obstructions to allow the drawers to roll freely. Clean any dust or debris from the casters as needed.

6. Fejlfinding

If you encounter any issues with your bed, refer to the following common solutions:

• Ustabil ramme: Check all connections. Ensure all bolts are securely tightened. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned.
• Skuffer glider ikke jævnt: Verify that the casters are clean and free of debris. Ensure the drawers are assembled correctly and are not overloaded. Check for any obstructions beneath the bed.
• Knirkende lyde: Tighten all bed frame hardware. If the noise continues, check the slat connections and ensure the mattress is properly seated.

7. Specifikationer

Image: Detailed dimensional drawing of the Merax Queen Upholstered Platform Bed, indicating length, width, and height measurements for the headboard, frame, and drawers.

8. Garanti og support

For warranty information or customer support regarding your Merax Upholstered Platform Bed, please contact Merax customer service directly. Refer to your purchase documentation for specific contact details or visit the official Merax webwebsted.

You can often find support resources and contact information on the Merax-butik på Amazon.