Indledning
Welcome to the Hover-1 Legacy Foldable Electric Scooter user manual. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize your riding experience.
Image: The Hover-1 Legacy Electric Scooter, showcasing its sleek black design and vibrant LED deck lighting.
Sikkerhedsoplysninger
Operating an electric scooter carries inherent risks. To ensure your safety and the safety of others, always adhere to the following guidelines:
- Always wear a helmet and appropriate safety gear, including knee and elbow pads.
- Rid ikke under påvirkning af alkohol eller stoffer.
- Overhold alle lokale færdselslove og regler.
- Avoid riding in wet conditions, on slippery surfaces, or in heavy traffic.
- Hold en sikker afstand til fodgængere og andre køretøjer.
- Regularly inspect your scooter for any damage or loose parts before each ride.
- Overskrid ikke den maksimale vægtgrænse på 264 pund.
- Sørg for, at batteriet er korrekt opladet før brug.
Pakkens indhold
Upon opening your Hover-1 Legacy package, please verify that all the following items are included:
- Hover-1 Legacy Electric Scooter
- Brugermanual
- Opladningsadapter
Montering og opsætning
Your Hover-1 Legacy scooter comes mostly pre-assembled. Follow these steps for initial setup:
- Udfoldning af scooteren: Løft forsigtigt styrstammen, indtil den låser i den oprejste position. Sørg for, at foldemekanismen er forsvarligt låst.
- Justering af styr: Juster styrets højde til en behagelig position, og fastgør det med hurtigudløserklemmen.amp.
- Indledende opkrævning: Before first use, fully charge the scooter's battery. Connect the charging adapter to the charging port on the scooter and then to a power outlet. The charging indicator light will change when fully charged (approximately 5 hours).
Image: The Hover-1 Legacy Electric Scooter shown in its folded configuration, highlighting its compact design for storage and transport.
Betjeningsvejledning
Familiarize yourself with the controls and features of your Hover-1 Legacy scooter:
- Tænd/sluk: Press and hold the power button on the handlebar display to turn the scooter on or off.
- Acceleration: Use the thumb throttle on the right handlebar to accelerate.
- Bremsning: Apply the rear brake lever on the left handlebar to slow down or stop. The scooter features rear braking for effective stopping.
- LCD-skærm: The central LCD display shows your current speed, battery level, and indicators for headlight, high-speed mode, or cruise control.
- LED Deck Light: The colorful LED deck light activates automatically when the scooter is powered on, enhancing visibility and style.
- Bluetooth-højttaler: To connect your device, enable Bluetooth on your smartphone and search for "Hover-1 Legacy". Pair with the scooter to play audio through its integrated speaker.
- Sammenfoldning til opbevaring: To fold the scooter, disengage the locking mechanism near the base of the handlebar stem and carefully fold the stem down until it clicks into place.
Billede: En detaljeret view of the Hover-1 Legacy's handlebar, showcasing the LCD display, throttle, and brake lever for intuitive control.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your Hover-1 Legacy scooter:
- Batteripleje:
- Oplad batteriet helt efter hver brug, især hvis det opbevares i længere perioder.
- Undgå at dræne batteriet helt.
- Opbevar scooteren et køligt, tørt sted væk fra direkte sollys.
- Rensning: Tør scooteren af med reklameamp cloth. Do not use harsh chemicals or abrasive cleaners. Avoid direct water spray to protect electronic components.
- Dæk inspektion: Although the scooter uses solid rubber wheels, regularly check them for any signs of wear or damage.
- Generel inspektion: Periodically check all screws, bolts, and connections to ensure they are tight and secure. Lubricate moving parts as needed.
Fejlfinding
If you encounter issues with your Hover-1 Legacy scooter, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Scooteren tænder ikke. | Low battery; loose power connection. | Charge the battery fully. Ensure all power cables are securely connected. |
| Scooter does not hold a charge. | Battery degradation; faulty charger. | Ensure charger is working correctly. If issues persist, contact customer support for battery replacement options. |
| Reduceret hastighed eller rækkevidde. | Low battery; riding uphill; heavy load; cold weather. | Charge battery. Avoid steep inclines or heavy loads. Battery performance can be affected by temperature. |
| Bluetooth-højttaleren opretter ikke forbindelse. | Bluetooth not enabled on device; scooter not in pairing mode. | Ensure Bluetooth is active on your device. Restart both scooter and device. |
Specifikationer
Key technical specifications for the Hover-1 Legacy Electric Scooter:
| Feature | Detalje |
|---|---|
| Mærke | Hover-1 |
| Modelnavn | H1-LGC |
| Motorkraft | 350W |
| Max hastighed | 15 mph |
| Max rækkevidde | 6 Mil |
| Vægtgrænse | 264 pund |
| Opladningstid | 5 timer |
| Hjulstørrelse | 8 tommer |
| Hjultype | Solid gummi |
| Bremse stil | Bagbremsning |
| Ophængstype | Baghjulsophæng |
| Særlige funktioner | Lights, Foldable, Integrated Bluetooth Speaker |
| Varens vægt | 25.1 pund |
| Dimensioner (LxBxH) | 40.8 x 17.3 x 46.3 tommer |
| Rammemateriale | Aluminium / plast |
Garanti og support
The Hover-1 Legacy Electric Scooter comes with a 90 dages begrænset garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.
For warranty claims, technical support, or replacement parts, please contact Hover-1 customer service. Keep your proof of purchase for warranty validation.
For the most up-to-date support information, please visit the official Hover-1 webwebstedet eller se kontaktoplysningerne på din produktemballage.
