Zgrmbo F500 digitalt vægur brugsanvisning

1. Introduktion

The Zgrmbo F500 Digital Wall Clock is designed for clear visibility and ease of use, featuring large 4-inch digits suitable for various environments such as living rooms, classrooms, garages, and bedrooms. This manual provides detailed instructions for setting up, operating, and maintaining your clock, ensuring optimal performance and longevity.

Front view of the Zgrmbo F500 Digital Wall Clock, showing its large, clear digital display.

2. Pakkens indhold

Kontroller venligst, at alle varer er til stede i pakken:

• 1 x Zgrmbo F500 Digital Wall Clock
• 1 x CR2302-batteri (forinstalleret eller separat)
• 1 x USB-strømkabel
• 1 x brugermanual
• 2 x Wall Nails
• 1 x Ruler (for wall mounting assistance)

Note: The CR2302 battery is for memory backup only and does not power the clock. It retains settings during power outageller når stikket er frakoblet.

3. Opsætning

3.1 Tænd/sluk uret

1. Connect the provided USB power cable to the clock's power input port.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included), a laptop, computer, or power bank.
3. The clock display will illuminate upon successful power connection.

3.2 Battery Installation (Memory Backup)

1. Find batterirummet på bagsiden af ​​uret.
2. If not already installed, insert the CR2302 coin cell battery into the compartment, ensuring correct polarity (+ side up).
3. Close the battery compartment securely. This battery ensures that your time and alarm settings are retained in case of a power interruption.

4. Betjeningsvejledning

An illustration of the Zgrmbo F500 Digital Clock, detailing its dimensions and icons representing features.

4.1 Indstilling af tid og dato

The clock typically has buttons on the side or back for setting. Refer to the labels next to the buttons (e.g., SET, UP, DOWN, MODE).

1. Tryk på SÆT or MODE button to enter time setting mode. The hour digits will likely flash.
2. Brug + (OP) og - (DOWN) buttons to adjust the hour.
3. Trykke SÆT or MODE again to move to minute setting, then adjust minutes using +/-.
4. Fortsæt med at trykke SÆT or MODE for at gennemgå indstillingen af ​​år, måned og dag.
5. Når alle indstillinger er færdige, skal du trykke på SÆT or MODE one last time, or wait a few seconds for the clock to exit setting mode automatically.

4.2 Justering af lysstyrke

Visual representation of custom brightness levels and the automatic brightness mode.

• Custom Brightness: Tryk på LYS button repeatedly to cycle through different brightness levels (e.g., 100%, 80%, 60%, 20%, 0%).
• Automatic Dimming Mode: Tryk længe på LYS button. Then, use the + or - buttons to toggle the automatic dimming mode ON or OFF. When ON, the clock will adjust brightness automatically based on the time of day:
  • 07:00 - 19:00: 100% lysstyrke
  • 19:00 - 23:00: 60% lysstyrke
  • 23:00 - 07:00: 25% lysstyrke

4.3 Alarmindstillinger

The clock supports one alarm with three operating modes.

1. Tryk på ALARM button to enter alarm setting mode. The alarm time digits will flash.
2. Brug + og - knapperne til at indstille den ønskede alarmtime og -minut.
3. Trykke ALARM again to select the alarm operating mode:
   • 1-5: Alarm sounds Monday to Friday only.
   • 1-6: Alarm sounds Monday to Saturday only.
   • 1-7: Alarmen lyder hver dag.
4. Trykke ALARM one last time or wait for the clock to exit setting mode.
5. To turn the alarm ON or OFF, short press the ALARM button outside of setting mode. An alarm icon will appear/disappear on the display.

4.4 Time Format (12/24 Hour)

Comparison of the 12-hour (Standard) and 24-hour (Military) time formats.

To switch between Standard (12-hour with AM/PM indicator) and Military (24-hour) time formats, simply press the + or - button when the clock is displaying the time normally (not in setting mode).

4.5 Daylight Saving Time (DST) Function

Illustration of the Daylight Saving Time (DST) function.

The clock supports a Daylight Saving Time (DST) function. Typically, a dedicated DST button or a combination of buttons is used to activate or deactivate this feature, which adjusts the time by one hour forward or backward. Consult the specific button labels on your clock for this function.

4.6 Hukommelse ved strømsvigt

Illustration demonstrating the power failure memory feature.

Thanks to the built-in CR2302 coin cell battery, the Zgrmbo F500 clock retains all its settings (time, date, alarm, etc.) even during a power outage or when unplugged. You will not need to reset the clock once power is restored.

4.7 Visningsmuligheder

• Flashing Center Dots: Tryk længe på + button to turn on or off the flashing colon (:) between the hour and minute digits.
• Alternating Time/Date Display: Tryk længe på - button to enable or disable the alternating display of time and date. When enabled, the clock will switch between showing the current time and the current date.

5. Installation

Detaljeret view of the back of the Zgrmbo F500 Digital Clock, highlighting mounting and stand features.

5.1 Vægmontering

The clock features a double wall-hung hole design for secure mounting.

1. Determine the desired location on your wall.
2. Use the provided ruler to mark the positions for the two wall nails, ensuring they are level and spaced correctly to align with the hanging holes on the back of the clock.
3. Carefully insert the two wall nails into the marked positions.
4. Align the clock's hanging holes with the nails and gently slide the clock down to secure it on the wall.
5. Utilize the hidden cable winder support on the back of the clock to manage any excess power cable, ensuring a neat appearance.

5.2 Skrivebordsplacering

For desk or tabletop use, the clock is equipped with two hidden, stable standing brackets.

1. Locate the two hidden feet on the back of the clock.
2. Gently pull out and unfold these feet until they lock into position, providing a stable angle for the clock to stand on a flat surface.
3. Place the clock on your desk, nightstand, or TV counter.
4. The hidden cable winder can also be used to keep the power cable tidy when placed on a surface.

6. Vedligeholdelse

• Rensning: For at rengøre uret skal du forsigtigt tørre displayet af ogasinmed en blød, tør eller let damp cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these may damage the surface.
• Udskiftning af batteri: If the clock fails to retain settings during a power outage, the CR2302 memory backup battery may need replacement. Follow the instructions in Section 3.2 to replace the battery.
• Opbevaring: If storing the clock for an extended period, disconnect it from power and consider removing the CR2302 battery to prevent potential leakage. Store in a cool, dry place.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

Zgrmbo provides an 18 måneders garanti for the F500 Digital Wall Clock, covering manufacturing defects and malfunctions under normal use. Additionally, a 45 dages returret tilbydes for din ro i sindet.

For any questions, technical assistance, warranty claims, or support, please do not hesitate to contact Zgrmbo customer service through the Amazon platform where you purchased the product. Please provide your order number and a detailed description of the issue to facilitate a quick resolution.