1. Introduktion
This manual provides essential instructions for the safe installation, operation, and maintenance of your Dimplex 50 Inch Slim Built-in Linear Electric Fireplace Heater, Model PLF5014-XS. Please read all instructions carefully before installation and use to ensure proper function and safety.
The Dimplex electric fireplace offers a slim design for flexible installation, multi-color flame technology, and supplemental heating capabilities. It includes an acrylic crystal ember bed and a remote control for convenient operation.
2. Vigtige sikkerhedsoplysninger
Always follow basic precautions to reduce the risk of fire, electric shock, and injury to persons.
- Læs alle instruktioner, før du bruger denne pejs.
- This fireplace is hot when in operation. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace and keep them away from the sides and rear.
- Ekstrem forsigtighed er nødvendig, når en varmeovn bruges af eller i nærheden af børn eller handicappede, og når pejsen efterlades i drift og uden opsyn.
- Brug ikke en pejs med en beskadiget ledning eller stik, eller efter at pejsen ikke fungerer korrekt, er blevet tabt eller beskadiget på nogen måde.
- Må ikke bruges udendørs.
- Find aldrig pejsen, hvor den kan falde ned i et badekar eller en anden vandbeholder.
- Før ikke ledningen under gulvtæpper. Dæk ikke ledningen med tæpper, løbere eller lignende belægninger. Anbring ledningen væk fra trafikområdet, og hvor den ikke vil blive snublet over.
- For at afbryde pejsen skal du slukke for betjeningselementerne og derefter tage stikket ud af stikkontakten.
- Indsæt ikke fremmedlegemer i ventilations- eller udstødningsåbninger, og lad dem ikke komme ind i dem, da dette kan forårsage elektrisk stød, brand eller beskadige pejsen.
- For at forhindre en mulig brand, må du ikke blokere luftindtag eller udstødning på nogen måde. Må ikke bruges på bløde overflader, som f.eks. en seng, hvor åbninger kan blive blokeret.
- All electrical work and wiring must be performed by a qualified electrician and in accordance with national and local electrical codes.
- This fireplace is equipped with a thermal cut-off device. If the heater overheats, the thermal cut-off will shut off the heater.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før du fortsætter installationen:
- Dimplex 50 Inch Slim Electric Fireplace Unit
- Akrylkrystaller (til glødeseng)
- Monteringsbeslag
- Fjernbetjening
4. Opsætning og installation
The Dimplex Slim Electric Fireplace is designed for flexible installation, allowing for full recess into 2x4 framing, partial recess, or wall-mounted installation.
4.1 Installationsmuligheder
This fireplace can be installed in various configurations to suit your space:
- Fuldt indbygget: The unit sits flush into new or existing 2x4 framing.
- Partially Recessed: A portion of the unit is recessed, with the front extending slightly from the wall.
- Vægmonteret: The unit is mounted directly onto the wall surface using the included bracket.
Figure 4.1: Flexible installation options for the Dimplex Slim Linear Electric Fireplace. This image illustrates how the fireplace can be integrated into a wall as fully recessed, partially recessed, or mounted directly on the wall surface.
4.2 Dimensioner og frirum
Ensure adequate space and clearances for proper installation and operation. The unit's shallow depth allows for integration into standard framing.
Figure 4.2: Product dimensions of the Dimplex 50 Inch Slim Electric Fireplace. The diagram shows the unit's width, height, and shallow depth, crucial for planning installation.
Figur 4.3: Sideprofile of the fireplace, demonstrating its slim design for minimal intrusion.
4.3 Elektrisk tilslutning
The fireplace requires a dedicated 120V, 15 Amp circuit. Consult a qualified electrician for hardwiring or ensure the power cord is connected to a grounded outlet.
Figure 4.4: Detail of the top vent, which is essential for heat dissipation and should not be obstructed.
5. Betjeningsvejledning
Your Dimplex electric fireplace can be operated using the included remote control or the control panel located on the unit.
5.1 Kontrolpanel
The control panel on the fireplace unit allows for basic adjustments.
Figure 5.1: On-unit control panel with temperature display and function icons.
5.2 Fjernbetjening
The remote control provides full functionality for your fireplace.
Figure 5.2: Remote control for convenient operation of all fireplace functions.
5.3 Funktioner
- Tænd/sluk: Aktiverer eller deaktiverer enheden.
- Flammeeffekter: Utilize Multi-Fire SL-Technology for a multi-layered flame appearance. Adjust flame color (Yellow, Orange, Blue, Mixed) and flame speed.
- Ember-seng: The acrylic crystal ember bed can have its color adjusted to complement the flame effects.
- Varme funktion: Provides supplemental heat for areas up to 400 sq ft. The air circulation mode helps distribute heat efficiently. Adjust the temperature setting and utilize the built-in timer for up to 8 hours of operation. The unit can be operated with or without the heat function.
Figure 5.3: The fireplace showcasing multi-color flame options and the illuminated crystal ember bed.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din elektriske pejs' lange levetid og optimale ydeevne.
- Rensning: Sørg for, at enheden er slukket og at stikket er taget ud, inden rengøring. Brug en blød, tør klud.amp klud til at rengøre de udvendige overflader. Brug ikke slibende rengøringsmidler eller spray.
- Luftventiler: Periodically check and clean the air intake and exhaust vents to ensure they are free from dust and obstructions. Blocked vents can lead to overheating.
- Interne komponenter: There are no user-serviceable parts inside the fireplace. Do not attempt to open the unit for internal cleaning or repairs.
7. Fejlfinding
If you experience issues with your Dimplex electric fireplace, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pejsen tænder ikke. | No power, tripped circuit breaker, loose connection. | Check power outlet, reset circuit breaker, ensure cord is securely plugged in. |
| Ingen varmeafgivelse. | Heater function off, temperature setting too low, thermal cut-off activated. | Ensure heater is enabled, increase temperature setting, check for obstructions around vents. |
| Flames are not visible or flickering incorrectly. | Flame effect off, internal component issue. | Ensure flame effect is turned on via remote or control panel. If issue persists, contact support. |
| Usædvanlig støj under drift. | Fan obstruction, loose component. | Ensure vents are clear. If noise persists, discontinue use and contact support. |
If troubleshooting steps do not resolve the issue, please contact Dimplex customer support for assistance.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | DIMPLEX |
| Modelnavn | PLF5014-XS |
| Produktmål (D x B x H) | 3.75" D x 50" B x 19.5" H |
| Materiale | Metal |
| Strømkilde | Elektrisk |
| Varmeoutput | 5100 britiske termiske enheder |
| Varmedækning | 400 kvm |
| Installationstype | Indbygget, vægmontering |
| Inkluderede komponenter | Acrylic Crystals, Mounting Bracket, Remote Control |
| UPC | 781052137295 |
| Varens vægt | 74.6 pund |
9. Garanti og support
Your Dimplex electric fireplace comes with a Limited Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
For technical support, replacement parts, or warranty claims, please contact Dimplex customer service. You can also visit the official Dimplex store for more information: Dimplex Store
