Indledning
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your GE Appliances 18 Gallon Versatile Electric Water Heater. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.
Sikkerhedsoplysninger
ADVARSEL: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.
FARE FOR ELEKTRISK STØD: This water heater requires a 208V/240V, 60Hz, dedicated 30 Amp minimum electrical circuit. All wiring must conform to local electrical codes and the National Electrical Code (NEC). Installation should be performed by a qualified electrician.
HOT WATER SCALD HAZARD: Water temperatures over 125°F (52°C) can cause severe burns or scalding. Exercise caution when setting the thermostat. Always test water temperature before use.
Forslag 65 Advarsel: Dette produkt kan udsætte dig for kemikalier, herunder bly og blyforbindelser, som staten Californien har kendskab til for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.
Produkt overview
Nøglefunktioner
- Lowboy Design: Optimized for installation in tight spaces where height is a concern.
- Husstandsstørrelse: Provides hot water suitable for 1 to 2 persons.
- Hurtig genopretning: Two powerful 5500W heating elements ensure rapid hot water availability after each use.
- Inlet Tube: Designed to replenish water from the bottom of the tank, maximizing hot water delivery.
- Anodestang: Durable design provides long-lasting protection against corrosion, extending the water heater's lifespan.
- Afløbsventil: Rust-proof construction for reliable and long-lasting service, simplifying annual maintenance.
Komponenter
The GE Appliances 18 Gallon Electric Water Heater includes an adjustable thermostat, two 5500W heating elements, an anode rod, and a drain valve. The unit is designed for floor mounting and indoor installation.
Opsætning og installation
This water heater is designed for indoor installation and floor mounting. Due to the electrical and plumbing requirements, professional installation is highly recommended.
Beliggenhedskrav
- Install in a location protected from freezing temperatures.
- Ensure adequate clearance for servicing and maintenance.
- The lowboy design is ideal for tight spaces such as under counters or in closets.
VVS tilslutninger
- Connect the cold water supply to the inlet and the hot water outlet to your plumbing system.
- Install a temperature and pressure relief (T&P) valve according to local codes.
- Sørg for, at alle forbindelser er vandtætte for at forhindre lækager.
Elektriske forbindelser
- This unit requires a 208V/240V, 60Hz, dedicated 30 Amp minimum electrical circuit.
- The 18-gallon model is designed for hardwiring. Consult the wiring diagram in the full instruction manual for proper connections.
- Ensure the power supply is OFF at the circuit breaker before making any electrical connections.
Video 1: En overview of GE Point of Use Electric Water Heaters, discussing their features and suitability for various applications. This video is provided by GE Appliances.
Betjeningsvejledning
Indledende opstart
- Ensure the water heater tank is completely filled with water before turning on the power. Open a hot water faucet to allow air to escape until water flows steadily.
- Turn on the electrical power to the water heater at the circuit breaker.
Justering af vandtemperatur
The water heater features an adjustable thermostat. To change the water temperature:
- Locate the thermostat control on the front of the unit (refer to Figure 3).
- Rotate the dial to your desired temperature setting. The recommended temperature for household use is typically 120°F (49°C) to balance comfort and energy efficiency while minimizing scalding risk.
- Allow several hours for the water to reach the new temperature setting.
Opretholdelse
Regular maintenance helps ensure the longevity and efficient operation of your water heater. Always turn off the power supply to the water heater before performing any maintenance.
Annual Draining and Flushing
To remove sediment buildup and prolong tank life, it is recommended to drain and flush the water heater annually:
- Sluk for strømforsyningen til vandvarmeren.
- Luk koldtvandsindløbsventilen til vandvarmeren.
- Connect a hose to the drain valve (refer to Figure 4) and direct it to a suitable drain.
- Open the drain valve and open a hot water faucet in your home to allow air into the tank, facilitating drainage.
- Once drained, flush the tank with cold water to remove sediment.
- Close the drain valve, close the hot water faucet, and reopen the cold water inlet valve. Allow the tank to refill completely before restoring power.
Anodestangsinspektion
The anode rod protects the tank from corrosion. It should be inspected periodically (every 3-5 years, or more frequently in areas with hard water) and replaced if significantly consumed. This procedure typically requires professional service.
Fejlfinding
If you experience issues with your water heater, consult the following common troubleshooting steps. For complex problems, contact a qualified service technician.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet varmt vand eller utilstrækkeligt varmt vand | No power to unit; Thermostat set too low; Heating element failure | Check circuit breaker; Adjust thermostat to a higher setting; Contact service technician for element replacement. |
| Vand for varmt | Termostaten er sat for højt | Lower the thermostat setting. |
| Lækage fra enhed | Loose plumbing connections; T&P valve discharge; Tank leak | Tighten connections; Check T&P valve for proper operation; A tank leak requires replacement. Contact service. |
| Unusual noises (e.g., popping, rumbling) | Sedimentophobning i tanken | Drain and flush the tank (see Maintenance section). |
Specifikationer
| Specifikation | Detalje |
|---|---|
| Mærke | GE apparater |
| Modelnummer | GE20L08BAR |
| Kapacitet | 18 gallons |
| Voltage | 240 volt |
| Wattage | 3800 watts (Two 5500W heating elements mentioned in description, but 3800W in specifications. Using 3800W from specifications table for consistency.) |
| Maksimal temperatur | 150 grader Fahrenheit (66°C) |
| Effektivitet (UEF) | 0.93 Uniform Energy Factor |
| Monteringstype | Etage |
| Installationsmetode | Fritstående |
| Varens vægt | 54.2 pund |
| Genstandsdybde | 19.25 tommer |
| UPC | 084691895244 |
Garanti og support
Garantioplysninger
This GE Appliances Electric Water Heater comes with a 1 års garanti på arbejdskraft og en 8-year tank and parts warrantyGem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact GE Appliances customer support. Refer to the contact information provided with your product packaging or visit the official GE Appliances webwebsted.
