1. Introduktion
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Sikkerhedsoplysninger
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- Afbryd strømmen til afbryderen eller sikringsboksen før installation eller service.
- Sørg for, at forsyningen voltage er kompatibel med armaturets krav (120V AC).
- Brug ikke armaturet med beskadigede ledninger eller komponenter.
- Undgå direkte øjenkontakt med lyskilden, når den er belyst.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- Undlad at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe sikkerhedsrisici.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
Billede 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Specifikationer
| Specifikation | Detalje |
|---|---|
| Modelnummer | PTF150-NW-G1-Y-FL-8-BZ |
| Mærke | Signify (Philips) |
| Wattage | 150 watt |
| Lumen output | 18600 lumen |
| Farvetemperatur | 4000K Cool White |
| Effektivitet | 124 lumen pr watt |
| Voltage | 120 volt (AC) |
| Monteringstype | Yoke Mount (Surface Mount) |
| Slutte | Bronze |
| Materiale | Die-cast aluminum housing, tempered glass lens |
| Ingress Protection (IP) Rating | IP65 (fixture), IP66 (connector) |
| Varens vægt | 4 pund |
| Dimensioner (ca.) | 16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D) |
5. Opsætning og installation
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Forberedelse: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- Monteringssted: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Mærkning og boring: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Sikre armaturet: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Elektrisk tilslutning:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.
Billede 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Betjeningsvejledning
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Tænd/sluk: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Automatisk drift: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Vedligeholdelse
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Rensning: Rengør linsen og huset regelmæssigt med en blød kludamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Inspektion: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Udskiftning af komponenter: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Fejlfinding
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Faulty circuit breaker/fuse. | Tjek strømforsyningen. Verify all wiring connections are secure (consult a qualified electrician). Nulstil afbryder eller udskift sikring. |
| Lyset flimrer eller er svagt. | Inconsistent power supply. Løse ledninger. Skade på armaturet. | Sørg for stabil strøm. Kontroller ledningsforbindelserne. If damage is suspected, discontinue use and contact support. |
| Vand inde i armaturet. | Improperly sealed connections. Damaged housing/lens. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport.
9. Garanti og support
For warranty information and technical support, please refer to the official Signify (Philips) webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.
Fabrikant: Betyde
Modelnummer: PTF150-NW-G1-Y-FL-8-BZ
Kontaktoplysninger: Please visit the official Signify webwebstedet for de mest opdaterede kontaktoplysninger og supportressourcer.
