Indledning
This user manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Metal Double Bed Frame. Please read this manual thoroughly before assembly and use to ensure safe and proper functionality of your new bed frame.

Image: The Yaheetech Metal Double Bed Frame, black, assembled in a modern bedroom setting with a light grey mattress and beige blanket. Two storage boxes are visible underneath the bed.
Vigtige sikkerhedsoplysninger
Overhold venligst følgende sikkerhedsretningslinjer for at forhindre personskade eller beskadigelse af produktet:
- Do not exceed the maximum weight capacity of 272 kg (approximately 600 lbs). Overloading the bed frame can lead to structural failure and injury.
- Pay close attention to potential pressure points during assembly. Ensure all components are aligned correctly before tightening fasteners.
- Always follow the assembly instructions carefully. Improper assembly can result in instability or collapse of the bed frame.
- Hold små dele og emballagematerialer væk fra børn under samling for at forhindre kvælningsfare.
- Periodically check all bolts and connections to ensure they remain tight and secure. Loose connections can compromise stability.
Opsætning og montering
The Yaheetech Metal Double Bed Frame is designed for straightforward assembly. All necessary parts are typically numbered for easy identification. It is recommended to assemble the bed frame with at least two people.
Monteringstrin:
- Unpack all components and verify against the parts list provided in your packaging. Ensure all pieces are present and undamaged.
- Begin by attaching the side rails to the headboard and footboard. Ensure all bolts are finger-tight before fully securing.
- Install the central support beam and its legs. These provide crucial stability for the mattress.
- Place the metal slats across the frame. Ensure they are evenly spaced and securely fastened to the side rails.
- Tighten all bolts and screws using the provided Allen key or appropriate tools. Double-check all connections for firmness.
- Verify that the mattress anti-slip mechanism (if applicable) is correctly installed to prevent the mattress from sliding.

Image: A detailed diagram illustrating the dimensions of the Yaheetech Metal Double Bed Frame, including length, width, height, and slat spacing. Maximum weight capacity is indicated as 272 kg.

Billede: Et nærbillede view demonstrating how the mattress anti-sliding mechanism is installed on the bed frame, showing a bolt and a small bracket designed to prevent the mattress from shifting.
Betjeningsvejledning
Once assembled, the bed frame is ready for use. It is designed to accommodate a 140x200 cm mattress.
- Madrasplacering: Carefully place your 140x200 cm mattress onto the assembled metal slats. Ensure it is centered and rests securely on the frame.
- Headboard Comfort: The bed frame features a 46.3 cm high headboard, providing comfortable back support for reading or relaxing in bed.
- Opbevaring under sengen: Designet giver mulighed for ample storage space underneath the bed, ideal for storing boxes, luggage, or other items, helping to maximize room utility.

Billede: A view showing the generous under-bed storage space, with a wicker basket placed neatly beneath the bed frame, demonstrating its practical use for storage.
Opretholdelse
Regelmæssig vedligeholdelse vil forlænge levetiden og stabiliteten af din sengeramme.
- Rensning: Rengør metalrammen med reklameamp or dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the painted finish.
- Fastgørelseskontrol: Periodically (e.g., every 3-6 months) inspect all bolts and screws. Tighten any that have become loose due to regular use.
- Beskyttende puder: Ensure the protective pads on the bottom of the legs are intact to prevent scratching your floor. Replace if worn.
Fejlfinding
Hvis du støder på problemer med din sengeramme, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Bed frame squeaks or makes noise. | Løse bolte eller forbindelser. | Tighten all bolts and screws on the frame, especially at joints and support legs. Ensure all slats are properly seated. |
| Sengerammen føles ustabil eller vaklende. | Forkert montering eller ujævnt gulv. | Re-check all assembly steps to ensure correct installation. Verify that the bed frame is on a level surface; use shims if necessary. |
| Madras glider på rammen. | Anti-slip mechanism not engaged or missing. | Ensure the mattress anti-slip brackets are properly installed and tightened. If not present, consider adding non-slip pads between the mattress and slats. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Yaheetech |
| Modelnummer | YA-00113042 |
| Farve | Sort |
| Produktmål (L x B x H) | 207.5 x 145.5 x 83.5 cm (81.7 x 57.3 x 32.9 tommer) |
| Varens vægt | 19 kilo (41.9 lbs) |
| Maksimal vægtkapacitet | 272 kg (600 lbs) |
| Kompatibel madrasstørrelse | 140x200 cm (Double) |
| Komponenter inkluderet | Hovedgærde, Lameller |
| Finish Type | Malet metal |
| Plejevejledning | Rengør med annonceamp eller tør klud. |

Image: An illustration highlighting the reinforced support structure of the bed frame, showing 10 solid support legs designed for great stability and durability.
Garantioplysninger
Specific warranty details for the Yaheetech Metal Double Bed Frame are not provided in the product information. Please refer to your purchase documentation or contact the seller directly for warranty terms and conditions.
Kundesupport
For further assistance, questions, or concerns regarding your Yaheetech Metal Double Bed Frame, please contact the seller:
- Sælgers navn: Yahee365
- Seller Store: Besøg Yaheetech Store på Amazon
- Hav venligst dit modelnummer (YA-00113042) og købsoplysninger klar, når du kontakter support.






