WAC Lighting R3HSDR-F9CS-WT

WAC Lighting Patriot 3in LED Square Recessed Light Instruction Manual

Model: R3HSDR-F9CS-WT

Indledning

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your WAC Lighting Patriot 3in LED Square Recessed Light. Please read this manual thoroughly before installation and retain it for future reference.

Vigtige sikkerhedsoplysninger

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

WAC Lighting Patriot 3in LED Square Recessed Light with junction box

Figure 1: WAC Lighting Patriot 3in LED Square Recessed Light with attached driver and junction box.

Opsætning og installation

The Patriot recessed light is designed for both remodel and new construction applications. An optional frame-in kit (R3H-FRAME) is sold separately for new construction when pre-framing is required.

Nødvendige værktøjer (ikke inkluderet):

Installationstrin:

  1. Sluk for strømmen: Ensure power to the installation area is disconnected at the circuit breaker or fuse box.
  2. Prepare Ceiling Cutout: Create a 4.13-inch (approximately 10.5 cm) diameter cutout in the ceiling. The fixture is suitable for ceiling thicknesses between 0.5 inches and 1.5 inches.
  3. Tilslut ledninger:
    • Åbn dækslet til samledåsen.
    • Connect the building's supply wires to the fixture's wires using appropriate wire connectors (not included). Connect live to live, neutral to neutral, and ground to ground.
    • Secure all connections and close the junction box cover.
  4. Vælg farvetemperatur (CCT): Before inserting the junction box into the ceiling, locate the 5-CCT selectable switch inside the electrical box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This can also be adjusted after installation if the junction box remains accessible.5-CCT Selectable switch diagram showing color temperature options

    Figure 2: Location of the 5-CCT selectable switch within the electrical box.

  5. Indsæt samledåse: Carefully push the connected junction box through the ceiling cutout.
  6. Install Light Fixture:
    • Connect the light fixture cable to the junction box cable.
    • Gently push the light fixture into the ceiling cutout. The retention clips will secure the light engine into place.
    WAC Lighting Patriot 3in LED Square Recessed Light installed

    Figure 3: The WAC Lighting Patriot 3in LED Square Recessed Light.

  7. Gendan strøm: Når armaturet er sikkert installeret, skal strømmen genoprettes ved afbryderen.

Beam Spread Lens Replacement:

The fixture comes with a 45-degree flood beam spread lens installed. An additional 25-degree narrow beam spread lens is included. To replace:

  1. Gently remove the existing lens from the fixture.
  2. Insert the desired lens into the fixture, ensuring it is seated correctly.

Betjeningsvejledning

Tænd/sluk:

The light operates via a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.

Color Temperature Selection (CCT):

The Patriot light features a 5-CCT selectable switch located inside the electrical junction box. This switch allows you to choose from five color temperatures:

To change the CCT, access the junction box and slide the switch to the desired setting. This adjustment can be made before, during, or after installation, provided the junction box is accessible.

Dæmpning:

This fixture is designed for smooth and continuous dimming with compatible electronic low voltage (ELV) or TRIAC dimmers. When using an ELV dimmer, the light dims down to 10%. With TRIAC dimmers, it dims down to 5%. Ensure your dimmer is compatible with LED fixtures.

Opretholdelse

The WAC Lighting Patriot LED Recessed Light requires minimal maintenance.

Fejlfinding

ProblemMulig årsagLøsning
Lyset tændes ikke.
  • Ingen strøm til armaturet.
  • Løs ledningsforbindelse.
  • Defekt kontakt.
  • Tjek afbryder/sikring.
  • Kontroller, at alle ledningsforbindelser er sikre (sørg først for, at strømmen er slukket).
  • Test kontakten med en anden enhed, eller udskift den.
Lyset flimrer eller dæmpes forkert.
  • Inkompatibel lysdæmper.
  • Løse ledninger.
  • Ensure dimmer is compatible with LED fixtures (ELV or TRIAC).
  • Kontrollér ledningsforbindelserne (sørg først for, at strømmen er slukket).
Forkert farvetemperatur.CCT-kontakten er indstillet forkert.Access the junction box and adjust the 5-CCT selectable switch to the desired setting.

Specifikationer

ModelnavnPatriot
ModelnummerR3HSDR-F9CS-WT
MærkeWAC belysning
Armaturtype3in LED Square Recessed Downlight
Magt12W
Leveret Lumens1,035 lm (maks.)
CRI90
Nominelle timer50,000
Farvetemperatur5-CCT Selectable (2700K, 3000K, 3500K, 4000K, 5000K)
Voltage120V-277V Universal
DæmpningSmooth and continuous with ELV (to 10%) or TRIAC (to 5%) dimmers
MaterialeStøbt Aluminium
SluttePainted White
Produktdimensioner4.75 cm L x 4.75 cm B x 4.13 cm H
Loftsudskæring4.13 tommer
Lofts tykkelse0.5 tommer til 1.5 tommer
Indendørs/Udendørs brugIndoor, Outdoor (Suitable for Dry, Damp, and Wet Locations)
CertificeringerETL & cETL UL #1598, Airtight, IC-Rated, CEC Title 24 Compliant, Energy Star 2.0 Certified, Title 24 JA8-2016
Varens vægt1.7 pund
UPC790576883571
Dimensional drawing of WAC Lighting Patriot 3in LED Square Recessed Light

Figure 4: Dimensional drawing with measurements for installation.

Garantioplysninger

This WAC Lighting Patriot LED Recessed Light is covered by a 5 års producentgaranti. This warranty covers defects in materials and workmanship under normal use. For warranty claims or detailed terms and conditions, please refer to the official WAC Lighting webwebsted eller kontakt kundesupport.

Kundesupport

For technical assistance, troubleshooting, or warranty inquiries, please contact WAC Lighting customer support. Refer to the official WAC Lighting webhjemmeside for aktuelle kontaktoplysninger.

WAC belysning Webwebsted: www.waclighting.com

Relaterede dokumenter - R3HSDR-F9CS-WT

Preview Installationsvejledning til WAC Lighting InvisiLED udendørs RGBWW LED-båndlys (T24-OD1-XX-CC)
Dette dokument indeholder omfattende installationsvejledning til WAC Lighting InvisiLED Outdoor RGBWW LED-båndbelysningssystem, model T24-OD1-XX-CC. Det dækker vigtige sikkerhedsforanstaltninger, ledningsdiagrammer, effektberegninger, maksimale længder og forskellige monterings- og tilslutningsmetoder til udendørs brug.
Preview WAC LOTOS R 6" Retrofit LED Downlight Installation Guide (R6DRAK)
Comprehensive installation instructions for the WAC Lighting LOTOS R 6" Retrofit LED downlight (model R6DRAK). Learn how to safely install and set color temperature for this recessed lighting fixture.
Preview Brugsanvisning til WAC RCUV-WT Smart Fan-fjernbetjening
Omfattende guide til betjening af WAC RCUV-WT Smart Fan-fjernbetjeningen, der dækker parring, betjening af ventilator og lys, brisetilstand, automatisk UV-slukning, Wi-Fi-indstillinger og fejlfinding.
Preview Installationsvejledning til WAC Mesh Gateway WH-GW1-WT
Installationsvejledning til WAC Mesh Gateway WH-GW1-WT, inklusive oplysninger om strømforsyning, konfiguration og FCC-overholdelse.
Preview WAC Lighting Volta 2" Tunable White Remodel Housing Invisible Trim Installation Guide
This document provides comprehensive installation instructions for the WAC Lighting Volta 2" Tunable White Remodel Housing Invisible Trim, model numbers R2RRL and R2SRL. It includes essential safety precautions, installation requirements, dimensional data, technical specifications, and detailed step-by-step guidance for proper setup.
Preview Installationsvejledning til WAC Lighting Tesla 3" LED-nybyggeri af boliger
Installationsvejledning til WAC Lighting Tesla 3" LED-nybyggerihus, inklusive sikkerhed, overview, installationstrin til huset og ledningsdiagrammer. Kompatibel med modellerne HR-3LED-H18D1, HR-3LED-H22D og HR-3LED-H15D.