Nilight Marine LED-lysbjælke 18W flomstråle (model 1501F-B) brugsanvisning

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Nilight Marine LED Light Bar. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Image 1.1: Nilight Marine LED Light Bar (Model 1501F-B) and its packaging.

2. Produktfunktioner

• Kraftig belysning: Equipped with 6pcs 3W high-intensity LED chips, providing 1,800 lumens of 5800K bright white light with a 60° flood beam pattern for broad visibility.
• Holdbar konstruktion: Features a corrosion-resistant die-casting aluminum alloy housing and an upgraded PC lens with over 90% light transmittance.
• Effektiv varmeafledning: Designed with 0.25-inch spacing fins to facilitate faster heat dissipation, ensuring product longevity.
• Vandtæt vurdering: IP67 waterproof rating, tested to withstand 72-hour laboratory salt spray, ensuring performance in harsh marine environments.
• Justerbar montering: Includes 180° adjustable mounting accessories for flexible installation and beam direction adjustment.
• Wide Voltage Kompatibilitet: Operates efficiently within a 10-30V DC range.

Image 2.1: The light bar demonstrating its IP67 waterproof capability.

Image 2.2: Illustration of the heat dissipation design with cooling fins.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 2 x 18W White Flood Beam Light Bars
• 1 x Pack of Mounting Brackets & Hardware (bolts, nuts, washers, Allen wrench)

Billede 3.1: Detaljeret view of the light bar dimensions and included mounting hardware.

4. Specifikationer

5. Installationsvejledning

Følg disse trin for korrekt installation:

1. Vælg monteringssted: Select a suitable location on your boat, vehicle, or other application that provides the desired light coverage and allows for secure mounting. Ensure the surface is stable and can support the weight of the light bar.
2. Saml monteringsbeslag: Attach the provided mounting brackets to the light bar using the included bolts, washers, and nuts. The brackets allow for 180° adjustment.
3. Sikker lysbjælke: Position the light bar with the assembled brackets onto your chosen mounting surface. Mark the drilling points for the bracket base.
4. Bore huller: Carefully drill pilot holes at the marked locations.
5. Monteringsbeslag: Secure the brackets to the mounting surface using appropriate fasteners (not always included, depending on surface material). Ensure a tight and stable fit.
6. Juster vinkel: Loosen the side bolts on the brackets to adjust the light bar to the desired angle. Tighten the bolts securely once the angle is set.
7. Ledningsføring:
   • Connect the red wire (+) from the light bar to a positive (+) 10-30V DC power source.
   • Connect the black wire (-) from the light bar to a negative (-) ground connection.
   • It is recommended to use an inline fuse and a switch (not included) for protection and control.
   • Ensure all connections are secure and properly insulated to prevent short circuits and corrosion, especially in marine environments.
8. Test funktionalitet: Before final use, test the light bar to ensure it powers on and functions correctly.

Image 5.1: Adjustable mounting bracket for flexible positioning.

Billede 5.2: Eks.ample installation of the light bars on a boat.

6. Betjeningsvejledning

The Nilight Marine LED Light Bar is designed for straightforward operation:

1. Tænd/sluk: Once properly wired to a power source and switch (if installed), activate the switch to turn the light bar on. Deactivate the switch to turn it off.
2. Stråleretning: If the light bar's beam direction needs adjustment, carefully loosen the mounting bolts on the side of the brackets, reposition the light to the desired angle, and then securely tighten the bolts.

7. Vedligeholdelse

To ensure optimal performance and extend the lifespan of your Nilight Marine LED Light Bar, follow these maintenance guidelines:

• Regelmæssig rengøring: Clean the lens and housing periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens or finish.
• Undersøg ledninger: Regularly check all wiring connections for signs of corrosion, fraying, or loose contacts. Secure or replace any damaged wiring.
• Tjek montering: Periodically inspect the mounting brackets and hardware to ensure they remain tight and secure. Tighten any loose bolts or nuts.
• Miljøbeskyttelse: While the light bar is IP67 waterproof and corrosion-resistant, prolonged exposure to extreme conditions (e.g., direct saltwater spray without rinsing) can still affect its appearance over time. Rinsing with fresh water after marine use is recommended.

8. Fejlfinding

If you encounter issues with your Nilight Marine LED Light Bar, refer to the following troubleshooting steps:

9. Garanti og support

Nilight products are designed for durability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the official Nilight webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

For mere information, besøg: Nilight Official Store