ATEM POWER Trailer Brake Controller Kit

1. Introduktion

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your ATEM POWER Trailer Brake Controller Kit. This system is designed to enhance towing safety by automatically activating electric trailer brakes in the event of a trailer breakaway. Featuring a built-in LiFePO4 battery and a solar panel for charge maintenance, this unit offers reliable performance for 1 or 2 axle caravans and trailers equipped with electric brakes.

Figur 1: Overview of the ATEM POWER Trailer Brake Controller Kit, showcasing the main unit with its integrated solar panel and the accompanying breakaway switch.

2. Sikkerhedsoplysninger

ADVARSEL:

• Always ensure the trailer breakaway system is properly installed and tested before each towing operation.
• This device is designed to activate trailer brakes in a breakaway situation; it is not a substitute for proper trailer hitching and safety chain usage.
• The unit has an IP65 waterproof rating, providing protection against dust and low-pressure water jets. However, it is recommended to keep the unit away from direct exposure to heavy rainstorms to ensure long-term reliability.
• Forsøg ikke at åbne eller ændre enheden. Overlad al service til kvalificeret personale.
• Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• 1 x ATEM POWER Solar Trailer Brake Controller
• 1 x brugermanual
• 1 x switch

Figure 2: Included components and approximate dimensions of the controller unit.

4. Opsætning og installation

Follow these steps for proper installation of the ATEM POWER Trailer Brake Controller Kit:

4.1 Mounting the Breakaway Controller

Decide the best location for mounting the unit. It should be a solid surface, typically on the trailer drawbar. Ensure that the solar panel faces upwards. This orientation allows the panel the maximum possible time to collect sunlight and convert it into energy, helping to maintain the internal battery's charge.

Figure 3: Step 1 - Securely mount the breakaway controller unit to a solid surface on the trailer drawbar, ensuring the solar panel faces upwards for optimal sunlight exposure.

4.2 Mounting the Breakaway Switch

Position the breakaway switch on the drawbar of the trailer, as depicted in the diagram below. This placement is critical for proper engagement of the switch in the event of a trailer detachment.

Figure 4: Step 2 - Position the breakaway switch on the trailer drawbar as shown, ensuring proper engagement for the breakaway function.

4.3 Ledningsdiagram

The kit comes with pre-wired, color-coded cables for easy connection. Refer to the diagram for correct wiring:

• Sort ledning: Connect to the 12V battery positive terminal.
• Blå ledning: Connect to the electric brakes.
• Hvid ledning: Tilslut til jord.

Figure 5: Wiring connections for the trailer brake controller system.

Ensure all connections are secure and protected from environmental elements. The unit is designed for use on 1 or 2 axle caravans and trailers equipped with electric brakes.

Figure 6: The controller is suitable for use on 1 or 2 axle caravans and trailers equipped with electric brakes, demonstrating its wide application.

5. Betjeningsvejledning

The ATEM POWER Trailer Brake Controller is designed for simple operation and status monitoring.

5.1 Batteristatusindikatorer

The unit features LED indicators to display the charge status of the built-in LiFePO4 battery:

• Gul LED: Opladning
• Rød LED: Lavt batteri
• Grøn LED: Fuldt opladet

Figure 7: The control unit features LED indicators for 'Charging', 'Low', and 'Fully Charged' battery status.

5.2 Testknapfunktionalitet

Press the 'TEST' button on the unit to verify the battery's charge status before towing. This ensures the LiFePO4 battery is properly charged and ready for operation.

5.3 Breakaway System Activation

In the event that your towing vehicle and trailer become disconnected, the breakaway switch will activate the electric trailer brakes automatically and swiftly. This action is crucial for bringing the trailer to a safe and controlled stop, enhancing road safety.

NOTE: The built-in solar panel is designed to prevent the trailer breakaway controller from running out of power during storage or prolonged periods of non-use. It is not intended as the primary charging method for a completely depleted battery.

6. Vedligeholdelse

To ensure optimal performance and longevity of your ATEM POWER Trailer Brake Controller, consider the following maintenance guidelines:

• Regelmæssig inspektion: Periodically inspect the unit, wiring, and connections for any signs of wear, damage, or corrosion. Ensure all mounting hardware remains secure.
• Renhed: Keep the solar panel clean and free from dirt, dust, or debris to maximize its efficiency in maintaining battery charge. Use a soft, damp klud til rengøring.
• Miljøbeskyttelse: While the unit is IP65 rated, prolonged exposure to extreme weather conditions, especially heavy rainstorms, should be minimized. Consider additional protection if the trailer is stored outdoors for extended periods in harsh climates.
• Batteripleje: The built-in LiFePO4 battery offers a longer lifespan and lower self-discharge rate compared to traditional AGM batteries. Regularly check the LED indicators to ensure the battery is adequately charged, especially before long trips.

7. Fejlfinding

If you encounter issues with your ATEM POWER Trailer Brake Controller, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

The ATEM POWER Trailer Brake Controller Kit is backed by a 1-års garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or any inquiries regarding your product, please contact ATEM POWER customer service through their official website or the retailer where the product was purchased. Please have your model number (AP-VABS002-UFA) and proof of purchase ready when contacting support.

For more information, visit the official ATEM POWER store: ATEM POWER Store