1. Produktet er slutview
The Thermalright TL-C12CW-S X3 is a high-performance 120mm ARGB case fan designed for efficient computer cooling. It features automatic speed control via a 4-pin PWM interface, allowing the fan speed to adjust based on motherboard temperature. The fan incorporates S-FDB bearings for quiet operation and extended lifespan, along with high-brightness ARGB lighting for customizable visual effects.
Nøglefunktioner:
- Højtydende køling: Automatic speed control (PWM) up to 1550 RPM, with 55cm cable for series control.
- Quality S-FDB Bearings: Ensures minimal noise and maximum cooling performance, extending fan life.
- Excellent ARGB Lighting: High-brightness LED atomizing fan blades with up to 17 modes, controllable and synchronizable via motherboard ARGB port.
- Alsidig anvendelse: Suitable for use as a case fan, with CPU coolers, or radiators for enhanced thermal management.
2. Hvad er der i æsken
- CPU Fan (Thermalright TL-C12CW-S X3)
- Mounting Screws (for case fan mounting)
- Vibration-free Mounts (for case fan mounting)
Note: The quantity of fans and accessories may vary based on the product package (e.g., 3 Quantities).
3. Installationsvejledning
3.1 Luftstrømsretning
Before installation, identify the airflow direction of the fan. The side with the fan blades visible (without the frame supports) is typically the intake side, pushing air in. The side with the frame supports is typically the exhaust side, where air exits.
Image: Thermalright TL-C12CW-S X3 fan illustrating the airflow direction. The fan blade side is intake, and the frame support side is exhaust.
Video: Official Thermalright case fan installation guide demonstrating airflow direction and mounting methods.
3.2 Mounting with Vibration-Free Mounts
- Insert the thin end of a vibration-free mount through a fan mounting hole on your PC case.
- Pull the mount through until the wider part secures it against the case.
- Align the fan with the mounting holes and push the remaining end of the mount through the corresponding fan hole.
- Pull the mount firmly to secure the fan in place, ensuring it is snug and vibration-free. Repeat for all four corners.
Image: Close-up of the Thermalright TL-C12CW-S X3 fan highlighting the soft-touch corner silicone rubber pads designed for vibration absorption.
3.3 Mounting with Screws
- Align the fan with the desired mounting location on your PC case.
- Insert a mounting screw through the fan's mounting hole and into the case.
- Use a screwdriver to gently tighten the screw. Do not overtighten to avoid damaging the fan or case.
- Repeat for all four corners to securely mount the fan.
3.4 Tilslutning af blæseren
Connect the 4-pin PWM fan cable from the Thermalright TL-C12CW-S X3 fan to an available 4-pin fan header on your motherboard. For ARGB lighting, connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard. Ensure correct orientation for both connections.
Image: Thermalright TL-C12CW-S X3 fan with its 4-pin PWM cable, indicating support for fan speed synchronization.
4. Betjeningsvejledning
4.1 Ventilatorhastighedskontrol (PWM)
The fan's 4-pin PWM connector allows your motherboard to automatically control the fan speed based on system temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
4.2 ARGB-lysstyring
The Thermalright TL-C12CW-S X3 features Addressable RGB (ARGB) lighting with up to 17 different lighting modes. To control and synchronize the lighting effects, connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard. Lighting can then be managed using your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
Image: Three Thermalright TL-C12CW-S X3 fans showcasing their vibrant ARGB lighting capabilities.
5. Vedligeholdelse
Regular maintenance helps ensure optimal performance and longevity of your Thermalright TL-C12CW-S X3 fans.
- Rensning: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Kabelstyring: Sørg for, at alle kabler er pænt ført og fastgjort for at forhindre interferens med ventilatorblade eller andre komponenter.
- Inspektion: Occasionally inspect the fan for any signs of wear, damage, or unusual noise.
6. Fejlfinding
- Ventilatoren drejer ikke:
- Kontroller, om 4-bens PWM-kablet er korrekt tilsluttet til bundkortets blæserheader.
- Verify that the fan header is enabled in the motherboard's BIOS/UEFI settings.
- Sørg for, at strømforsyningen fungerer korrekt.
- ARGB Lights Not Working/Synchronizing:
- Confirm the 3-pin ARGB cable is correctly connected to a 5V ARGB header on the motherboard.
- Check your motherboard's ARGB software for proper configuration and synchronization settings.
- Ensure the ARGB header is enabled in the motherboard's BIOS/UEFI.
- Overdreven støj:
- Kontroller, om der er kabler eller forhindringer, der rammer ventilatorbladene.
- Sørg for, at ventilatoren er sikkert monteret og ikke vibrerer mod kabinettet.
- Rengør eventuelt støvophobning på ventilatorbladene.
- Adjust fan speed settings in BIOS/UEFI or software to a lower RPM if noise is a concern and temperatures allow.
7. Specifikationer
| Model | TL-C12CW-S X3 |
| Dimensioner | 120 x 120 x 25 mm (4.72" L x 0.98" B x 4.72" H) |
| Hastighed | 1550 omdr./min. (maks.) |
| Støjniveau | 25.6 dBA (maks.) |
| Luftstrøm | 66.17 CFM (maks.) |
| Lufttryk | 1.53 mm H2O (maks.) |
| Stik | 4-Pin PWM |
| ARGB belysning | 3-benet 5V ARGB |
| Leje Type | S-FDB-leje |
| Nominel voltage | 12 volt |
| Nominel strøm | 0.20 A |
| Wattage | 3.6 watt |
| Materiale | Copper (likely referring to internal components, not frame) |
| Kompatible enheder | Stationære computere |
8. Garanti og support
For garantioplysninger og teknisk support henvises til den officielle Thermalright webwebstedet eller kontakt deres kundeservice. Gem din købsbevis til garantikrav.
