1. Introduktion
This user manual provides essential information for the safe and efficient operation of your Havit Lighting 30W 12V DC IP20 Triac Indoor Dimmable LED Driver. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Havit Lighting 30W 12V DC IP20 Triac Indoor Dimmable LED Driver is designed to provide stable 12V DC power for LED lighting applications, featuring Triac dimming capabilities for adjustable light output. It comes complete with a flex and plug for easy installation in indoor environments.
2. Sikkerhedsoplysninger
WARNING: Electrical Shock Hazard. Installation should only be performed by a qualified electrician.
- Ensure the main power supply is disconnected before installation, maintenance, or troubleshooting.
- This LED driver is rated IP20, meaning it is suitable for kun indendørs brug. Do not expose to moisture, water, or high humidity.
- Overskrid ikke den maksimale belastning på 24 W. Minimumsbelastningen er 3 W.
- Sørg for tilstrækkelig ventilation omkring føreren for at forhindre overophedning.
- Do not attempt to open or modify the driver. There are no user-serviceable parts inside.
- Connect the input (240V AC) and output (12V DC) correctly as indicated on the unit.
3. Produktfunktioner
- Triac dimmable LED driver, allowing for smooth dimming from 10% to 100%.
- Complete with Flex and Plug for convenient connection to a standard power outlet.
- Easy to install design.
- Suitable for indoor area use only (IP20 rated).
- Enhances your home lighting with a stylish, modern atmosphere.
- Constant Voltage output (12V DC).
4. Opsætning og installation
Follow these steps for proper installation of the LED driver:
- Forberedelse: Sørg for, at hovedstrømforsyningen til installationsområdet er afbrudt ved afbryderen.
- Montering: Position the LED driver in a suitable indoor location, ensuring adequate ventilation. The driver dimensions are approximately 155mm (L) x 54mm (W) x 20mm (H). Refer to the dimension diagram below for precise measurements and mounting points.
Figure 1: Technical drawing showing the dimensions of the LED driver, including length (155mm), width (54mm), and height (20mm), along with input and output port locations and mounting hole details (Ø3mm).
- Indgangsforbindelse: Plug the integrated flex and plug into a standard 240V AC power outlet.
- Udgangsforbindelse: Connect your 12V DC LED lighting fixtures to the output terminals of the driver. Ensure correct polarity (+ to + and - to -). The output is 12V DC at 2.5A, providing 30W of power.
Figur 2: Forside view of the Havit Lighting LED Driver, showing the input cable, output terminals, and product labeling with specifications such as model number (HV9660-12V30W), input voltage (200-240V AC), and output voltage (12V DC).
- Tænd: Once all connections are secure, restore power at the circuit breaker.
5. Betjeningsvejledning
This LED driver is designed for use with Triac dimmers (leading edge and trailing edge). To operate:
- Ensure the LED driver is correctly installed and powered on.
- Use a compatible Triac dimmer switch connected to the 240V AC input circuit to adjust the brightness of the connected LED lights.
- The dimming range is typically from 10% to 100%. Adjust the dimmer control to achieve the desired light level.
Note: The quality of dimming performance may vary depending on the specific Triac dimmer used and the connected LED load. For optimal performance, use high-quality, compatible dimmers.
6. Vedligeholdelse
The Havit Lighting LED Driver requires minimal maintenance. Follow these guidelines:
- Keep the driver clean and free from dust. Use a soft, dry cloth for cleaning.
- Brug ikke flydende rengøringsmidler eller slibende materialer.
- Sørg for, at ventilationsåbningerne ikke blokeres.
- Regularly check connections for tightness and signs of wear.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No light output from LEDs. |
|
|
| LED'erne flimrer eller dæmpes uregelmæssigt. |
|
|
| Driver is hot to the touch. |
|
|
Hvis problemerne fortsætter efter at have fulgt disse trin, bedes du kontakte kundesupport.
8. Specifikationer
| Modelnummer | HV9660-12V30W |
| Input bindtage | 240V AC |
| Udgang Voltage | 12V DC |
| Udgangseffekt | 30W |
| Anbefalet maksimal belastning | 24W |
| Minimumsbelastning | 3W |
| Dæmpningstype | Triac (Leading edge & Trailing edge) |
| Dæmpningsområde | 10% - 100% |
| IP-vurdering | IP20 (kun indendørs brug) |
| Dimensioner (L x B x H) | 15.5 x 5.4 x 2 cm |
| Vægt | 300 gram |
| Certificering | UL |
9. Garantioplysninger
The Havit Lighting 30W 12V DC IP20 Triac Indoor Dimmable LED Driver comes with a 3 Years Replacement Warranty fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
The warranty does not cover damage caused by improper installation, misuse, abuse, unauthorized modifications, or exposure to conditions beyond the specified IP20 rating (e.g., water damage).
To make a warranty claim, please retain your proof of purchase and contact your retailer or Havit Lighting customer support.
10. Kundesupport
For technical assistance, troubleshooting, or warranty inquiries, please contact Havit Lighting customer support:
- Webwebsted: www.havitlighting.com.au (Eksamplinket, det faktiske link kan variere)
- E-mail: support@havitlighting.com.au (Eksampe-mail, den faktiske e-mail kan variere)
- Telefon: Please refer to the Havit Lighting webhjemmeside for lokale kontaktnumre.
When contacting support, please have your product model number (HV9660-12V30W) and proof of purchase readily available.
