1. Introduktion
This manual provides detailed instructions for the proper use, application, and maintenance of AK Interactive AK WARGAME Liquid Pigments, specifically the Green Oxide (AK1212) variant. Adhering to these guidelines will ensure optimal results and longevity of your models and tools. Please read this manual thoroughly before beginning any application.
2. Produktet er slutview
The AK WARGAME Liquid Pigments Green Oxide (AK1212) is a high-quality enamel-based liquid pigment designed for weathering and detailing wargame models, dioramas, and other scale models. This 35ml bottle contains a concentrated pigment that offers a self-fixing, matt finish when applied correctly. It is formulated to provide realistic effects and can be diluted for various application techniques.
Figure 1: AK WARGAME Liquid Pigments Green Oxide (AK1212) 35ml bottle. The label indicates it is an enamel liquid pigment, Green Oxide color, and can be diluted with enamel thinner for a self-fixing, matt finish.
3. Opsætning og klargøring
3.1 Sikkerhedsforanstaltninger
- Arbejd i et godt ventileret område for at undgå indånding af dampe.
- Wear appropriate personal protective equipment, such as gloves and a respirator, especially when airbrushing.
- Opbevares utilgængeligt for børn og kæledyr.
- Undgå kontakt med hud og øjne. Ved kontakt skylles straks med rigeligt vand, og hvis irritationen fortsætter, søg lægehjælp.
3.2 Overfladeforberedelse
Ensure the model surface is clean, dry, and free of dust, grease, or other contaminants. A properly prepared surface will ensure optimal adhesion and finish of the pigment.
3.3 Dilution
This liquid pigment can be diluted with enamel thinner. The dilution ratio depends on the desired effect and application method (brush or airbrush). Start with a small amount of thinner and gradually add more until the desired consistency is achieved. For airbrushing, a thinner consistency is generally required.
4. Brugsanvisning (applikation)
4.1 Shaking the Bottle
Before each use, shake the bottle thoroughly to ensure the pigment is uniformly mixed. Pigments can settle over time, and proper mixing is crucial for consistent color and performance.
4.2 Påføringsmetoder
- Brush Application: Apply the pigment directly or diluted with a brush to create weathering effects, streaks, or dirt accumulation. Use a fine brush for precise details and a broader brush for larger areas.
- Airbrush Application: For airbrushing, dilute the pigment with enamel thinner to a milk-like consistency. Apply in thin, even coats to build up the desired effect. Maintain a consistent distance and pressure for smooth coverage.
4.3 Drying Time and Finish
The pigment is self-fixing and dries to a matt finish. Drying time can vary depending on humidity, temperature, and the thickness of the applied layer. Allow sufficient time for each layer to dry before applying subsequent coats or handling the model. Typically, touch-dry in minutes, fully cured in hours.
Figure 2: A swatch demonstrating the Green Oxide pigment color and texture when applied. This illustrates the typical appearance of the pigment.
5. Vedligeholdelse
5.1 Rengøringsværktøj
Immediately after use, clean brushes and airbrushes with enamel thinner or a dedicated cleaner suitable for enamel paints. Do not allow the pigment to dry on tools, as it can be difficult to remove.
5.2 Opbevaring
Store the pigment bottle upright in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent drying and contamination. Proper storage helps maintain the pigment's quality and extends its shelf life.
6. Fejlfinding
- Ujævn anvendelse: Ensure the surface is clean and properly prepared. Adjust dilution ratio and application technique (e.g., thinner coats for airbrushing, even brush strokes).
- Clogging (Airbrush): This often indicates insufficient dilution or dried pigment in the nozzle. Clean the airbrush thoroughly and ensure proper dilution before use.
- Pigment Drying Too Fast: Work in smaller sections or consider slightly increasing dilution. High temperatures or low humidity can accelerate drying.
- Dårlig vedhæftning: Ensure the surface is free of oils, dust, and other residues. A primer might be necessary for certain materials.
7. Specifikationer
- Produktnavn: AK WARGAME Liquid Pigments Green Oxide
- Modelnummer: AK-AK1212
- Mærke: AK Interactive
- Bind: 35 ml
- Type: Enamel Liquid Pigment
- Slutte: Matt, Self-fixing
- Fortynding: Requires Enamel Thinner
- Dato først tilgængelig: 11. juni 2023
8. Garanti og support
AK Interactive products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official AK Interactive webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
Fabrikant: AK Interactive
For yderligere hjælp, besøg: www.ak-interactive.com
