Ufesa Flexy Heat NCD Complex Ergonomisk Varmepude Brugermanual

1. Produktet er slutview

The Ufesa Flexy Heat NCD Complex is an ergonomic heating pad designed for targeted heat therapy. It features a soft microfiber finish for comfort and is equipped with a detachable control unit for ease of use and cleaning. This heating pad is intended to provide soothing warmth for muscle relaxation and relief from discomfort in areas such as the upper back and dorsal vertebrae.

• Dimensioner: 42 x 63 cm
• Magt: 100W
• Materiale: Ultra-soft Microfiber
• Temperaturindstillinger: 3 niveauer
• Sikkerhedsfunktion: Automatisk slukning efter 90 minutter

Image 1: Ufesa Flexy Heat NCD Complex heating pad showing its ergonomic shape and attached controller.

2. Sikkerhedsinstruktioner

Please read all safety instructions carefully before using the Ufesa Flexy Heat NCD Complex heating pad. Failure to follow these instructions may result in electric shock, fire, or injury.

• Do not use the heating pad continuously for more than 90 minutes. The device features an automatic safety shut-off after this period.
• Avoid using the highest temperature setting for prolonged periods.
• Ensure the heating pad does not come into contact with moisture or liquids. Do not use in damp conditions or while bathing.
• Brug ikke varmepuden, mens du sover.
• Always unplug the heating pad from the power outlet when not in use.
• Never leave the heating pad unattended, especially when powered on.
• Keep out of reach of children and individuals with reduced physical, sensory, or mental capabilities unless supervised.
• Do not use if the heating pad or control unit shows any signs of damage.
• Do not insert pins or other sharp objects into the heating pad.
• Do not fold or crease the heating pad sharply during use or storage.

3. Opsætning

1. Carefully unpack the Ufesa Flexy Heat NCD Complex heating pad and its control unit from the packaging.
2. Ensure the control unit is securely connected to the heating pad. The connection point is designed for a firm fit.
3. Place the heating pad on the desired area of your body, ensuring it lies flat and is not folded or bunched up.
4. Plug the power cord of the control unit into a standard electrical outlet.

Image 2: Product packaging highlighting key features like dimensions, detachable connection, auto-off, temperatures, fast heating, and washability.

4. Betjeningsvejledning

Follow these steps to operate your Ufesa Flexy Heat NCD Complex heating pad:

1. Tænd: Once plugged in, slide the switch on the control unit from '0' to '1', '2', or '3' to turn on the heating pad.
2. Vælg temperatur: Choose your desired heat level using the slide switch:
   • Position 1: Lav varme
   • Position 2: Middel varme
   • Position 3: Høj varme
3. Hurtig opvarmning: The heating pad will reach its desired temperature quickly, typically within 5 minutes.
4. Automatisk slukning: For safety, the heating pad will automatically turn off after 90 minutes of continuous use. If you wish to continue use, simply slide the switch back to '0' and then select your desired temperature again.
5. Sluk: After use, slide the switch on the control unit to '0' and unplug the heating pad from the electrical outlet.

5. Rengøring og vedligeholdelse

Proper cleaning and maintenance will ensure the longevity and hygiene of your heating pad.

1. Afbryd strømmen: Always unplug the heating pad from the power outlet before cleaning.
2. Detach Control Unit: Disconnect the control unit from the heating pad. The pad is washable only when the control unit is detached.
3. Vask: The heating pad cover can be washed by hand or in a washing machine at a maximum temperature of 30°C (86°F). Use a mild detergent.
4. Tørring: Allow the heating pad to air dry completely before reattaching the control unit or storing. Do not tumble dry, iron, or dry clean.
5. Genmontering: Ensure the heating pad is completely dry before securely reattaching the control unit.
6. Control Unit Care: The control unit should never be immersed in water or other liquids. Clean it with a dry, soft cloth.

6. Opbevaring

When not in use, store your heating pad properly to maintain its condition:

• Sørg for, at varmepuden er helt afkølet og tør, inden den opbevares.
• Store the heating pad flat or loosely rolled in a clean, dry place. Avoid folding it tightly or placing heavy objects on top of it.
• Keep the heating pad and control unit in their original packaging or a protective bag to prevent dust accumulation.

7. Fejlfinding

If you encounter issues with your Ufesa Flexy Heat NCD Complex heating pad, please refer to the following common solutions:

• Varmepude tænder ikke:
  • Kontroller, at netledningen er korrekt tilsluttet en fungerende stikkontakt.
  • Ensure the control unit is firmly connected to the heating pad.
  • Verify that the slide switch on the control unit is moved from '0' to a temperature setting (1, 2, or 3).
• Heating pad stops heating unexpectedly:
  • The automatic safety shut-off may have activated after 90 minutes of continuous use. Turn the switch to '0' and then back to your desired temperature setting to restart.
  • Check for any visible damage to the cord or heating pad. If damaged, discontinue use.
• Utilstrækkelig varme:
  • Ensure you have selected a higher temperature setting if needed.
  • Allow up to 5 minutes for the pad to reach its full temperature.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte Ufesa kundesupport.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation included with your product packaging or visit the official Ufesa website. For further assistance or support, you may contact Ufesa customer service.

You can also visit the Ufesa brand store for more information: Ufesa Brand Store