EMART 16"x16" Softbox Lighting Kit Instruction Manual

1. Introduktion

This manual provides detailed instructions for the assembly, operation, and maintenance of your EMART 16"x16" Softbox Lighting Kit. This kit is designed to provide versatile and adjustable lighting for various applications, including photography, video recording, and live streaming. Please read this manual thoroughly before use to ensure proper setup and safe operation.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x 16"x16" Softbox (Head 210° adjustable)
• 1 x 3000K-6000K 85W LED Bulb (with Remote Control)
• 1 x Par handsker
• 1 x Height Adjustable Softbox Light Stand (18" to 65" / 45cm-165cm)
• 1 x Nut for light stand bottom
• 3 x velcrokabelbindere
• 1 x bæretaske

Figure 2.1: All components included in the EMART Softbox Lighting Kit.

3. Opsætningsvejledning

Follow these steps to assemble your softbox lighting kit:

1. Assemble the Light Stand:
   • Remove the bottom knob from the light stand.
   • Adjust the tripod base by spreading the legs for stability and tighten the knob.
   • Extend the light stand to your desired height (18 to 65 inches / 45cm-165cm) by loosening the plate buckles and sliding the sections. Securely tighten the buckles once the desired height is reached.
   

   Figure 3.1: Detachable light stand details and adjustment points.

2. Install the Softbox:
   • Mount the 16"x16" softbox onto the top of the light stand. Ensure it is securely fastened.
   • The softbox head can be adjusted up to 210 degrees to direct light as needed.
   

   Figure 3.2: Adjusting the softbox angle for various lighting effects.
3. Indsæt LED-pæren:
   • Carefully screw the 85W LED bulb into the socket inside the softbox. It is recommended to wear the provided gloves to avoid leaving fingerprints or smudges on the bulb.
   

   Figure 3.3: The 85W LED bulb with adjustable color temperature.

4. Attach the Diffusion Cloth:
   • Attach the white diffusion cloth to the front of the softbox using the Velcro fasteners. Ensure the soft cloth is facing outward on the front side. This diffuses the light for a softer output.
5. Kabelstyring:
   • Use the provided Velcro cable ties to secure the power cord along the light stand. This helps prevent tripping hazards and keeps your setup tidy. The power cord is 3 meters long for increased flexibility.
   

   Figure 3.4: Recommended use of gloves for bulb handling and cable ties for organization.

4. Betjeningsvejledning

Your EMART Softbox Lighting Kit offers flexible control over light settings:

1. Tænd/sluk:
   • Use the in-line switch on the power cord to turn the light on or off.
   • Alternatively, use the red power button on the remote control.
2. Justering af lysstyrke og farvetemperatur:
   • The 85W LED bulb offers adjustable brightness and color temperature (3000K-6000K).
   • Use the provided remote control to adjust these settings. The remote has buttons for Warm (3000K), White (4500K), and Cold (6000K) light modes, as well as brightness adjustments (20%, 50%, 100%).
   • The remote control operates within a 7-meter (23-foot) range.
   

   Figure 4.1: Remote control functions for brightness and color temperature adjustment.

3. Adjusting Softbox Angle:
   • The softbox head can be tilted up to 210 degrees. Loosen the adjustment knob on the light stand connection point, position the softbox to the desired angle, and then tighten the knob to secure it.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your lighting kit:

• Håndtering af pære: Always wear the provided gloves when handling the LED bulb to prevent fingerprints, smudges, and potential burns if the bulb has been recently used.
• Rensning: Use a soft, dry cloth to gently wipe down the softbox and light stand. Avoid abrasive cleaners or solvents.
• Opbevaring: When not in use, disassemble the kit and store it in the provided carry bag to protect components from dust and damage.

6. Fejlfinding

If you encounter issues with your EMART Softbox Lighting Kit, consider the following:

• Lyset tænder ikke: Ensure the power cord is securely plugged into a working outlet and the in-line switch is in the 'On' position. Check the LED bulb to ensure it is screwed in correctly.
• Fjernbetjeningen virker ikke: Verify that the remote control has working batteries. Ensure there are no obstructions between the remote and the LED bulb. The remote operates within a 7-meter range.
• Unstable Light Stand: Ensure the tripod legs are fully spread and the base knob is securely tightened. The bottom rubber sleeves should be in contact with the floor for maximum stability.

7. Specifikationer

8. Garanti og support

For warranty information or technical support, please refer to the product packaging or contact EMART customer service directly. Contact details can typically be found on the manufacturer's official webwebstedet eller gennem dit købssted.