1. Introduktion
Thank you for choosing PERLESMITH Universal Speaker Stands. This manual provides detailed instructions for the safe and proper assembly, operation, and maintenance of your speaker stands. Please read this manual thoroughly before installation and retain it for future reference.
These speaker stands are designed to elevate your bookshelf or satellite speakers, optimizing sound projection and creating an ideal listening environment. They feature adjustable height, tilt functionality, and integrated cable management for a clean setup.
Image 1.1: PERLESMITH Universal Speaker Stands with speakers.
2. Sikkerhedsoplysninger
- Vægt kapacitet: Do not exceed the maximum load capacity of 11 lbs (5 kg) per stand. Overloading can cause instability and potential damage or injury.
- Forsamling: Ensure all components are securely fastened according to the instructions. Improper assembly can lead to product failure.
- Placering: Place the speaker stands on a stable, level surface. Uneven surfaces can compromise stability.
- Børn og kæledyr: Keep children and pets away from the speaker stands during assembly and ensure they cannot climb on or pull down the stands once assembled.
- Flytning: When moving the stands, always lift them carefully. Do not drag them, especially with speakers mounted, as this may damage the floor or the stands.
3. Pakkens indhold
Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact PERLESMITH customer support.
- Speaker Stand Base (x2)
- Adjustable Pole (x2)
- Speaker Platform/Bracket (x2)
- Non-slip Pads/Rubber Feet (set)
- Mounting Hardware Kit (screws, washers, etc.)
- Instruktionsmanual (dette dokument)
Image 3.1: Components of the PERLESMITH Universal Speaker Stands.
4. Opsætning og installation
4.1 Basic Assembly Steps
- Fastgør stangen til basen: Screw the adjustable pole securely into the speaker stand base. Ensure it is tightened firmly.
- Attach Speaker Bracket: Secure the speaker platform/bracket to the top of the adjustable pole.
- Sikker højttaler: Place your speaker onto the platform. The top plate can be adjusted from 5.9 to 10.82 inches to fit various speaker sizes. Use the provided screws to secure the speaker to the bracket if your speaker has compatible mounting points.
Image 4.1: Easy 3-Step Installation Guide.
4.2 Højdejustering
The speaker stands feature a height adjustment mechanism, allowing you to set the speaker height from 18.7 inches to 43 inches. This helps in creating an optimal listening 'sweet spot' by aligning the speakers with your ear level when seated.
- To adjust the height, loosen the locking mechanism on the pole.
- Carefully slide the upper pole section to the desired height.
- Tighten the locking mechanism firmly to secure the pole at the new height.
Image 4.2: Height Adjustment Feature.
4.3 Speaker Tilting
The speaker platform allows for a 0-5° tilt in all directions. This feature enables precise aiming of the sound towards your listening position, further enhancing the audio experience.
- Gently tilt the speaker platform to the desired angle.
- Ensure the speaker remains stable and centered on the platform after tilting.
Image 4.3: Speaker Tilting for Optimal Sound.
4.4 Kabelstyring
The speaker stands include a cable management system to keep your setup tidy. A large hole (1.18"H x 0.59"W) is integrated into the pole to route speaker wires, providing a clean and organized appearance.
- Feed your speaker cables through the designated opening in the pole.
- Guide the cables down the pole and out through the base.
Image 4.4: Integrated Cable Management.
4.5 Stability and Floor Protection
The stands are equipped with non-slip pads or rubber feet on the base. These provide stability and protect your flooring from scratches or damage.
- Ensure the non-slip pads are properly attached to the bottom of the base.
- Adjust the feet if necessary to ensure the stand is level on uneven surfaces.
Image 4.5: Rubber Feet for Stability.
5. Betjeningsvejledning
Once assembled and speakers are securely mounted, the PERLESMITH Universal Speaker Stands require minimal operation. The primary operational aspects involve adjusting the height and tilt to achieve your preferred listening experience.
- Optimal positionering: Experiment with different heights and tilt angles to find the best sound projection for your room and seating arrangement. Generally, tweeters should be at ear level.
- Stabilitetstjek: Periodically check that all connections are tight and the stand remains stable, especially after making adjustments.
6. Vedligeholdelse
To ensure the longevity and appearance of your PERLESMITH Speaker Stands, follow these simple maintenance guidelines:
- Rensning: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp en klud kan bruges, efterfulgt af øjeblikkelig tørring. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Hardwarekontrol: Every few months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary to maintain structural integrity.
- Miljøforhold: Avoid exposing the stands to extreme temperatures, high humidity, or direct sunlight for prolonged periods, as this may affect the material finish.
7. Fejlfinding
If you encounter any issues with your speaker stands, refer to the following common solutions:
- Stativet er vakkelvornt:
- Sørg for, at alle skruer og forbindelser er helt spændt.
- Verify the stand is on a flat, level surface. Adjust the rubber feet if necessary to compensate for uneven flooring.
- Check that the speaker weight does not exceed the 11 lbs (5 kg) capacity.
- Vanskeligheder med at justere højden:
- Ensure the locking mechanism is fully loosened before attempting to adjust the pole.
- Clean any dust or debris from the adjustable pole sections.
- Speaker Not Secure on Platform:
- Ensure the speaker is centered on the platform.
- If your speaker has mounting holes, use the appropriate screws from the hardware kit to secure it.
- Verify the platform width adjustment is appropriate for your speaker size.
If the issue persists, please contact PERLESMITH customer support for further assistance.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | PERLESMITH |
| Modelnumre | PSSS2, PSSS6 |
| Materiale | Legeret stål |
| Belastningskapacitet | 11 lbs (5 kg) per stand |
| Justerbart højdeområde | 18.7 tommer til 43 tommer |
| Speaker Platform Adjustment | 5.9 inches to 10.82 inches (width) |
| Tilt justering | 0-5° in all directions |
| Kabelstyringshul | 1.18"H x 0.59"W |
9. Garantioplysninger
PERLESMITH products are manufactured with quality and durability in mind. These speaker stands come with a limited warranty against defects in materials and workmanship under normal use. The specific warranty period may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please visit the official PERLESMITH webwebsted eller kontakt kundesupport.
10. Support
If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact PERLESMITH customer service.
- Webwebsted: Besøg PERLESMITH-butikken på Amazon
- E-mail: Refer to your product packaging or the PERLESMITH webwebsted for direkte e-mail support.
- Telefon: Refer to your product packaging or the PERLESMITH webwebsted for direkte telefonsupport.
