Ledwood TWS Titanium-hovedtelefoner LD-S20 brugermanual

Indledning

Thank you for choosing the Ledwood TWS Titanium Headphones, model LD-S20. These true wireless stereo earbuds are designed to provide a high-quality audio experience with the convenience of Bluetooth 5.1 connectivity. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Pakkens indhold

• Ledwood TWS Titanium Headphones (Left and Right Earbuds)
• Trådløs opladningsetui
• USB-C Charging Cable (typically included)
• Brugermanual (dette dokument)

Produkt overview

Familiarize yourself with the components of your Ledwood TWS Titanium Headphones.

Billede 1: The Ledwood TWS Titanium Headphones, electric blue color, resting inside their open charging case. The earbuds are visible, along with the charging contacts and the Ledwood logo on the case.

• høretelefoner Left and Right earbuds with touch control surfaces and silicone ear tips.
• Opladningsetui: Protects and charges the earbuds. Features a charging indicator light and a USB-C charging port.

Opsætning

1. Opladning af hovedtelefoner og etuiet

Før første brug skal du sørge for, at både ørepropperne og opladningsetuiet er fuldt opladet.

1. Placer ørepropperne i opladningsetuiet. Sørg for, at de er korrekt isat; magnetiske kontakter holder dem på plads.
2. Slut opladningsetuiet til en strømkilde ved hjælp af det medfølgende USB-C-kabel.
3. Indikatorlampen på opladningsetuiet lyser for at vise opladningsstatus.
4. A full charge for the case typically takes approximately 2 hours. The earbuds will charge automatically when placed in the powered case.

Billede 2: Front view of the Ledwood TWS Titanium Headphones in their open charging case, highlighting the earbuds and the charging indicator light below the Ledwood logo.

2. Bluetooth-parring

Pair your headphones with your device (smartphone, tablet, etc.) to begin listening.

1. Tænd: Open the charging case, and the earbuds will automatically power on and enter pairing mode. You may hear an audible prompt.
2. Aktiver Bluetooth: On your device, go to the Bluetooth settings and ensure Bluetooth is enabled.
3. Vælg enhed: Look for "LD-S20" or "Ledwood LD-S20" in the list of available devices and select it to connect.
4. Bekræftelse: Once successfully paired, you will hear a confirmation tone or voice prompt from the earbuds. The earbuds are now ready for use.
5. Automatisk genforbindelse: After initial pairing, the earbuds will automatically connect to the last paired device when removed from the case, provided Bluetooth is active on the device.

Betjeningsvejledning

The Ledwood TWS Titanium Headphones feature touch controls for easy management of audio playback and calls.

Billede 3: Front view of the two Ledwood TWS Titanium Earbuds, positioned side-by-side, highlighting their sleek design and the touch-sensitive area on each earbud.

Tænd/sluk

• Tænd: Open the charging case, or long-press the touch control area on both earbuds for approximately 3 seconds.
• Sluk: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for approximately 5 seconds.

Musik kontrol

• Afspil/pause: Et enkelt tryk på begge øretelefoner.
• Næste nummer: Tryk to gange på den højre øretelefon.
• Forrige nummer: Dobbelttryk på venstre øretelefon.
• Lydstyrke op: Tryk tre gange på den højre øretelefon.
• Skrue ned for lyden: Tryk tre gange på venstre øretelefon.

Opkaldsstyring

• Besvar/afslut opkald: Enkelt tryk på en af ​​øretelefonerne under et indgående opkald eller et aktivt opkald.
• Afvis opkald: Long-press on either earbud for 2 seconds during an incoming call.

Stemmeassistent

• Aktiver stemmeassistent: Hold trykket længe på en af ​​øretelefonerne i 2 sekunder (når du ikke er i gang med et opkald).

Opretholdelse

Proper care and maintenance will extend the lifespan of your headphones.

Rensning

• Brug en blød, tør og fnugfri klud til at rengøre ørepropperne og opladningsetuiet.
• Brug ikke slibende rengøringsmidler, alkohol eller kemiske opløsningsmidler.
• Gently clean the ear tips and charging contacts to ensure optimal performance.

Opbevaring

• Når ørepropperne ikke er i brug, skal de altid opbevares i deres opladningsetui for at beskytte dem og holde dem opladede.
• Opbevar enheden et køligt, tørt sted, væk fra ekstreme temperaturer og direkte sollys.

The headphones are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. They are not designed for submersion in water.

Fejlfinding

Hvis du støder på problemer, kan du prøve følgende løsninger:

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Ledwood customer service directly. Details can typically be found on the official Ledwood webhjemmeside eller gennem din forhandler.