Kismile KM-WD5820Y 3-in-1 Water Dispenser with Ice Maker User Manual

1. Introduktion

Thank you for choosing the Kismile KM-WD5820Y 3-in-1 Water Dispenser with Ice Maker. This appliance provides convenient access to hot, cold, and ice water. Please read this manual thoroughly before operation to ensure proper use, maintenance, and safety. Keep this manual for future reference.

2. Sikkerhedsinstruktioner

• Elektrisk sikkerhed: Sørg for, at stikkontakten passer til apparatets lydstyrke.tage. Brug ikke forlængerledninger. Tag altid stikket ud af dispenseren før rengøring eller vedligeholdelse.
• Sikkerhed med varmt vand: The hot water function dispenses water at temperatures up to 194°F (90°C). Exercise extreme caution to prevent burns. Keep children away from the hot water dispenser.
• Placering: Place the dispenser on a flat, stable, and level surface. Ensure adequate ventilation around the unit (at least 4 inches from walls). Do not place in direct sunlight or near heat sources.
• Vandforsyning: Use only potable water. Do not operate the dispenser without water in the reservoir to prevent dry burning.
• Rensning: Regularly clean the appliance as instructed in the maintenance section to ensure hygienic operation and prevent odors.
• Skade: Do not operate if the power cord or plug is damaged. Contact customer support for repairs.

3. Produktet er slutview

The Kismile KM-WD5820Y is a versatile countertop water dispenser designed to provide hot, cold, and ice water. It features a top-loading design for 3-5 gallon water bottles or direct water addition.

Figur 3.1: Kismile 3-in-1 Water Dispenser with Ice Maker, showing a 5-gallon water bottle installed on top and a glass of iced water next to it.

Komponenter og kontroller

Figur 3.2: Diagram illustrating the main components of the water dispenser, including the water bottle, control panel, and drip tray, with approximate dimensions.

• Vandflaskeholder: Located on top, compatible with 3-5 gallon bottles.
• Kontrolpanel: Features buttons and indicator lights for various functions.
• Varmtvandsudløb: Doserer varmt vand.
• Koldtvandsudløb: Uddeler koldt vand.
• Is dispenser: Area where ice cubes are produced and collected.
• Aftagelig drypbakke: Opsamler spild og er nem at rengøre.
• Ventilationsgitter: Placeret på siderne for varmeafledning.

Figur 3.3: Nærbillede views of the stainless steel control panel, removable drip tray, and side fan for heat dissipation.

Kontrolpanelindikatorer:

• Strømlys: Angiver, at enheden er tændt.
• Add Water Light: Flashes red when water level is low, indicating a need to refill.
• Unlock Light: Indicates the hot water safety lock is disengaged.
• Hot Water Light: Illuminates when hot water heating is active.
• Ice Block Light: Illuminates when ice making is active.
• Cold Water Light: Illuminates when cold water cooling is active.

4. Opsætning

4.1 Udpakning

1. Tag forsigtigt dispenseren ud af emballagen.
2. Inspect the unit for any shipping damage. If damaged, do not operate and contact the seller.
3. Remove all packaging materials, including any protective films or tapes.

4.2 Placering

1. Place the dispenser on a sturdy, level countertop or table capable of supporting its weight when full.
2. Ensure there is at least 4 inches (10 cm) of clearance from walls and other objects on all sides to allow for proper ventilation.
3. Undgå at placere enheden i direkte sollys eller i nærheden af ​​varmegenererende apparater.

4.3 Indledende rengøring

Before first use, it is recommended to clean the internal water paths.

1. Prepare a mixture of water and a small amount of food-grade vinegar or a mild cleaning solution.
2. Pour the cleaning solution into the water reservoir (if using direct fill) or through a clean water bottle.
3. Dispense a few cups of water from both hot and cold spouts until the solution is flushed out.
4. Rinse thoroughly by repeating the process with clean, fresh water until no cleaning solution residue or odor remains.

4.4 Vandforsyningstilslutning

The dispenser supports two methods for adding water:

Figur 4.1: Illustration showing the two methods for adding water: installing a 3-5 gallon water bottle or directly pouring water into the top reservoir.

• Option 1: Install a Water Bottle
  Place a 3-5 gallon water bottle onto the top loading port. Ensure it is seated firmly to prevent leaks.
• Option 2: Direct Adding Water
  Open the top cover and pour potable water directly into the internal reservoir.

4.5 Strømtilslutning

1. Once water is loaded, plug the power cord into a grounded electrical outlet.
2. The Power indicator light on the control panel will illuminate.

5. Betjeningsvejledning

After setup, allow the unit approximately 15-30 minutes for the water to reach optimal hot and cold temperatures, and for the first batch of ice to be produced.

Figur 5.1: Diagram highlighting the hot water, ice making, and cold water functions of the dispenser.

5.1 Udlevering af varmt vand

1. Sæt en kop under varmtvandstuden.
2. Press and hold the safety lock button (if applicable, indicated by 'Unlock' light) and then press the 'HOT' button to dispense hot water.
3. Slip knappen for at stoppe dispenseringen.
4. The hot water temperature reaches approximately ≥194°F (90°C).

5.2 Tapping af koldt vand

1. Place a cup under the cold water spout.
2. Press the 'COLD' button to dispense cold water.
3. Slip knappen for at stoppe dispenseringen.
4. The cold water temperature reaches approximately ≤46.4°F (8°C).

5.3 Ice Making Function

1. Ensure the water reservoir is adequately filled. The 'Add Water' light will flash if water is low.
2. Press the 'ICE' button on the control panel to activate the ice making function. The 'Ice Block' light will illuminate.
3. The dispenser can produce 9 bullet-shaped ice cubes in approximately 6-13 minutes.
4. Ice production capacity is approximately 45 lbs per 24 hours.
5. The ice will be dispensed into the internal ice storage bin.

5.4 Vand Shortage Indikator

If the water level in the reservoir is low, the 'Add Water' indicator light will flash red. Refill the water bottle or add water directly to the reservoir. The light will stop flashing once the water level is sufficient.

6. Vedligeholdelse og rengøring

Regular cleaning is essential for maintaining hygiene and optimal performance of your water dispenser.

6.1 Udvendig rengøring

1. Unplug the dispenser from the power outlet.
2. Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
3. Tør grundigt med en ren klud.

6.2 Rengøring af drypbakke

1. Drypbakken er aftagelig for nem rengøring.
2. Slide out the drip tray, empty any collected water, and wash it with mild soap and water.
3. Skyl grundigt og tør inden genindsætning.

6.3 Internal Cleaning (Recommended Monthly)

To prevent mineral buildup and ensure fresh-tasting water, perform internal cleaning regularly.

1. Tag stikket ud af dispenseren og fjern vandflasken.
2. Drain all remaining water from the hot and cold tanks by dispensing from the spouts until no more water comes out.
3. Prepare a cleaning solution: Mix 1 gallon of clean water with 1 cup of food-grade white vinegar, or use a commercially available water dispenser cleaning solution.
4. Pour the cleaning solution into the water reservoir.
5. Lad opløsningen sidde i 15-30 minutter.
6. Dispense the entire cleaning solution through both hot and cold spouts into a bucket.
7. Rinse the internal system thoroughly by pouring several gallons of fresh, clean water through the reservoir and dispensing it from both spouts until no vinegar smell or taste remains.
8. Wipe down the inside of the reservoir with a clean cloth.

7. Fejlfinding

Se følgende tabel for almindelige problemer og deres løsninger.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Kismile customer service or the seller directly.

Please have your model number (KM-WD5820Y) and purchase date available when contacting support.