1. Introduktion
Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.
2. Vigtige sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.
- Do not connect to a dimmer switch.
- Ensure the power supply is 120V AC, 60Hz.
- Forsøg ikke at adskille eller ændre armaturet.
- Hold brandfarlige materialer væk fra lysarmaturet.
- Suitable for wet locations. Ensure all connections are properly sealed.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter med installationen.
- Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
- Monteringsbeslag
- Gummi pakning
- Trådmøtrikker
- Monteringsskruer
- Instruktionsmanual
4. Produktfunktioner
- High Brightness & Energy Efficiency: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
- Justerbart design: Three adjustable heads provide a 270-degree detection zone for wide coverage.
- Enhanced Motion Sensor: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
- Holdbar og vejrbestandig: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
- Farvetemperatur: 6500K Daylight White for clear, bright illumination.
Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.
Image 4.2: Aluminum construction for efficient heat dissipation.
5. Installationsvejledning
Før du begynder: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).
5.1 Monteringsmuligheder
The fixture can be mounted on a wall or soffit.
Image 5.1: Soffit Mounted vs. Wall Mounted installation examples.
5.2 Ledningsinstruktioner
- Sluk for strømmen ved hovedafbryderen.
- Fastgør monteringsbeslaget til samledåsen ved hjælp af de medfølgende skruer.
- Tilslut ledningerne:
- Black (L): Connect to the live wire from the power supply.
- White (N): Connect to the neutral wire from the power supply.
- Green (GND): Connect to the ground wire from the power supply.
- Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
- Fastgør lysarmaturen til monteringsbeslaget.
- Adjust the light heads to the desired angles.
- Gendan strømmen ved afbryderen.
Image 5.2: Wiring diagram and product dimensions.
Billede 5.3: Visuel vejledning til installationstrin.
6. Betjeningsvejledning
The motion sensor has three adjustable knobs for customization:
- SENS (følsomhed): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
- LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
- TID (Tidsforsinkelse): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.
7. Vedligeholdelse
- Rengør armaturet regelmæssigt med en blød,amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Periodically check electrical connections for tightness and signs of wear.
- Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power; incorrect wiring; LUX setting too low. | Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon. |
| Lyset forbliver tændt konstant. | Continuous motion detected; TIME setting too long; wiring issue. | Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed). |
| Bevægelsessensor registrerer ikke. | SENS setting too low; obstructions; incorrect mounting height. | Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range. |
| Lyse flimrer. | Loose wiring connection; unstable power supply. | Check and tighten all wiring connections; consult an electrician for power supply issues. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Onforu |
| Modelnummer | BDB55G-3 |
| Wattage | 65 watt |
| Lysstyrke | 6500 lumen |
| Farvetemperatur | 6500 Kelvin (Daylight White) |
| Bevægelsessensorvinkel | 180° |
| Bevægelsesdetekteringsafstand | Op til 72 fod |
| Justering af tidsforsinkelse | 10 sekunder til 7 minutter |
| Vandmodstandsniveau | IP65 vandtæt |
| Materiale | Metal (Die-cast Aluminum) |
| Voltage | 120 volt |
| Produktdimensioner | 10.7 cm L x 5.8 cm B x 4.7 cm H |
| Antal lyskilder | 3 (Adjustable Heads) |
| Installationstype | Vægmontering |
10. Garanti og support
This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.
For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu webwebsted.
