TAMIYA 1/10 RC Sand-Viper 2WD Buggy Instruktionsmanual (TAM58374A)

1. Introduktion

This manual provides essential instructions for the assembly, operation, and maintenance of your TAMIYA 1/10 RC Sand-Viper 2 Wheel Drive electric kit (Model TAM58374A). Please read this manual thoroughly before beginning assembly or operation to ensure correct usage and to maximize the performance and longevity of your RC vehicle.

Figur 1.1: The TAMIYA 1/10 RC Sand-Viper 2WD Buggy. This image displays the complete remote-controlled buggy, featuring its distinctive yellow body, black chassis, and off-road tires.

The Sand-Viper utilizes the DT-02 chassis, a 2WD platform designed for straightforward assembly and reliable performance. Its 4-wheel double wishbone suspension system contributes to agile handling characteristics. The body is constructed from durable, lightweight polycarbonate, finished in a yellow paint scheme complemented by gray dish wheels. Front grooved tires and rear spike tires are designed to provide effective traction across various surfaces.

2. Sikkerhedsforanstaltninger

Always observe the following safety guidelines to prevent injury or damage to property.

• Voksenopsyn: Operation by individuals under 14 years of age requires direct adult supervision.
• Driftsmiljø: Operate the RC vehicle in open, clear areas away from people, pets, and obstacles. Avoid public roads, crowded places, and wet conditions.
• Batterihåndtering: Follow all battery manufacturer instructions for charging, discharging, and storage. Use only compatible chargers and batteries.
• Bevægelige dele: Keep fingers, hair, and loose clothing away from rotating wheels and gears during operation.
• Elektriske komponenter: Ensure all electrical connections are secure. Avoid contact with water to prevent short circuits.
• Opretholdelse: Perform regular checks and maintenance as described in this manual to ensure safe operation.

3. Kitets indhold

The TAMIYA Sand-Viper kit (TAM58374A) includes the following primary components. Please verify all parts are present before beginning assembly.

• DT-02 Chassis components
• Polycarbonate body shell (yellow pre-painted)
• Front grooved tires and rear spike tires
• Gray dish wheels
• Motor
• Elektronisk hastighedsregulator (ESC)
• Assembly hardware (screws, nuts, bearings, etc.)
• Brugsanvisning

Note: Additional items required for operation, such as a 2-channel RC system (transmitter and receiver), steering servo, 7.2V battery pack, and compatible charger, are sold separately.

4. Opsætning og montering

Assembly of the TAMIYA Sand-Viper involves several steps. Refer to the detailed diagrams and instructions provided in the included assembly manual for each specific step. This section provides a general overview.

1. Chassis konstruktion: Begin by assembling the DT-02 chassis frame. This involves attaching the main components that form the vehicle's backbone.
2. Suspension Assembly: Install the 4-wheel double wishbone suspension system, including shock absorbers and suspension arms. Ensure all pivot points move freely.
3. Gearbox and Drivetrain: Assemble the 2WD gearbox, ensuring gears are properly lubricated and mesh correctly. Install the drive shafts to the rear wheels.
4. Wheel and Tire Installation: Mount the gray dish wheels onto the axles and attach the grooved front tires and spike rear tires.
5. Motor and ESC Installation: Securely mount the electric motor and Electronic Speed Controller (ESC) to the chassis. Connect the motor to the ESC according to the ESC's instructions.
6. Steering Servo and RC System: Install the steering servo and connect it to the steering linkage. Mount the receiver and connect all necessary wires from the ESC and servo to the receiver.
7. Body Mounting: Attach the polycarbonate body shell to the chassis using the provided body posts and clips.
8. Indledende kontrol: Before first operation, perform a thorough check of all screws, connections, and moving parts to ensure everything is secure and functions correctly.

5. Betjeningsvejledning

Once assembled and powered, follow these steps for safe and effective operation of your TAMIYA Sand-Viper.

1. Transmitter Power On: Always turn on your RC transmitter first.
2. Tænd for køretøjet: Connect the fully charged 7.2V battery pack to the ESC and then turn on the vehicle's power switch.
3. Funktionskontrol: Before driving, verify that the steering and throttle respond correctly to your transmitter inputs. Ensure the steering is centered.
4. Kørsel: Operate the vehicle with smooth, controlled inputs. Avoid sudden acceleration, braking, or sharp turns at high speeds, especially during initial runs.
5. Batterilevetid: Monitor battery performance. When the vehicle's speed noticeably decreases, stop operation and replace or recharge the battery.
6. Vehicle Power Off: Always turn off the vehicle's power switch first, then disconnect the battery.
7. Transmitter Power Off: Finally, turn off your RC transmitter.

Vigtig: Never operate the vehicle with a low transmitter battery, as this can lead to loss of control.

6. Vedligeholdelse

Regular maintenance is crucial for the longevity and optimal performance of your TAMIYA Sand-Viper.

• After Each Run:
  • Clean the chassis and body of dirt, dust, and debris using a soft brush or compressed air.
  • Inspect for any loose screws or damaged parts. Tighten or replace as necessary.
  • Check tires for wear and ensure they are securely mounted.
• Periodic Maintenance (Every 5-10 Runs):
  • Inspect the gearbox for debris and ensure gears are properly lubricated. Re-lubricate if needed.
  • Check shock absorbers for proper function and oil leaks. Refill or replace if necessary.
  • Examine all electrical connections for corrosion or damage.
  • Check the steering linkage for excessive play.
• Opbevaring: Store the vehicle in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect and remove batteries during storage.

7. Fejlfinding

This section addresses common issues you might encounter with your TAMIYA Sand-Viper.

If the problem persists after attempting these solutions, consult the detailed assembly manual or contact TAMIYA customer support.

8. Specifikationer

9. Garanti og support

For information regarding warranty coverage, technical support, or replacement parts for your TAMIYA Sand-Viper (TAM58374A), please refer to the official TAMIYA website or contact your local TAMIYA distributor.

TAMIYA Official Webwebsted: www.tamiya.com

Please have your model number (TAM58374A) and purchase information available when contacting support.