Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller Instruction Manual

Indledning

The Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller is designed for an enhanced gaming experience across multiple platforms, including Sega Genesis/Mega Drive consoles, PC, Mac, and other USB-enabled devices. This manual provides detailed instructions for the setup, operation, and maintenance of your controller.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Retro-Bit BIG6 Wireless Controller
• SEGA Genesis Wireless Receiver
• USB trådløs modtager
• USB-C Charge Cable (3.3ft / 1m)

Image: The Retro-Bit BIG6 Wireless Arcade Controller, including the controller itself, the Sega Genesis receiver, the USB receiver, and the product packaging.

Produkt overview

The BIG6 controller features a classic 6-button layout with modern enhancements for versatile gaming.

Controller layout

• Retningstastatur (D-pad): For movement and navigation.
• Handlingsknapper (A, B, C, X, Y, Z): Six primary action buttons.
• Start knap: For pausing games or confirming selections.
• Hjemknappen: For system-level functions (e.g., on Switch or PC).
• Vælg knap: For additional in-game or system functions.
• Skulderknapper (V, H): Located on the top edge for modern gaming controls.

Billede: Forside view of the Retro-Bit BIG6 Wireless Arcade Controller, showing the D-Pad, six action buttons (A, B, C, X, Y, Z), Start button, and Sega Genesis logo.

Billede: Top view of the Retro-Bit BIG6 Wireless Arcade Controller, highlighting the L and R shoulder buttons.

Opladningsport

The controller features a USB-C port for charging its internal battery.

Billede: Bagside view of the Retro-Bit BIG6 Wireless Arcade Controller, displaying the central USB-C charging port and the L and R shoulder buttons.

Opsætning

1. Opladning af controlleren

1. Connect the supplied USB-C charge cable to the controller's USB-C port.
2. Tilslut den anden ende af kablet til en USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
3. The LED indicator on the controller will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2-3 hours.

2. Connecting to SEGA Genesis/Mega Drive Console

1. Insert the SEGA Genesis Wireless Receiver into a controller port on your Genesis/Mega Drive console.
2. Ensure the console is powered on. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid.

3. Connecting to PC, Mac, or USB-Enabled Devices

1. Insert the USB Wireless Receiver into an available USB port on your PC, Mac, or other compatible device.
2. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid. The operating system should automatically detect the controller.

Betjeningsvejledning

Tænd/sluk

• Tænd: Press and hold the Home button for approximately 3 seconds.
• Sluk: The controller will automatically power off after a period of inactivity to conserve battery. To manually power off, press and hold the Home button for approximately 5-7 seconds until the LED indicator turns off.

Grundlæggende brug

Once connected, the controller functions as a standard gamepad. Button assignments may vary depending on the game or system. Refer to your game's instructions for specific control schemes.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre controlleren. Undgå at bruge skrappe kemikalier eller slibende materialer.
• Opbevaring: Opbevar controlleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade controlleren helt ofte. Oplad controlleren regelmæssigt, selvom den ikke er i brug i længere perioder.

Fejlfinding

Controlleren opretter ikke forbindelse/parrer ikke

• Sørg for, at controlleren er opladet.
• Verify that the correct receiver (Genesis or USB) is securely plugged into the target device.
• Make sure the controller and receiver are within close proximity (recommended within 10 feet).
• If pairing issues persist, locate the small reset pinhole on the back of the controller. Use a thin object (like a paperclip) to press the button inside the pinhole for a few seconds, then attempt to re-pair.

Buttons Unresponsive or Incorrectly Mapped

• Sørg for, at controlleren er fuldt opladet og korrekt tilsluttet.
• For PC/Mac, check the device's controller settings or calibration tools to ensure proper recognition and mapping.
• Some games may require specific controller configurations. Consult the game's manual.

Kort batterilevetid

• Sørg for, at controlleren er fuldt opladet før brug.
• Batteriets ydeevne kan forringes over tid med gentagne opladningscyklusser.
• Operating in environments with extreme temperatures can affect battery performance.

Specifikationer

Garanti og support

For garantioplysninger, teknisk support eller yderligere assistance, besøg venligst den officielle Retro-Bit webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.

Retro-Bit Official Webwebsted: www.retro-bit.com