BETAFPV Cetus X 2S børsteløs drone instruktionsmanual

Indledning

The BETAFPV Cetus X 2S Brushless Drone is a high-performance FPV quadcopter designed for both indoor and outdoor flight. It features an ELRS V3 firmware, C04 FPV Camera, M04 25-400mW VTX, and an F4 1S 12A FC V2.2 flight controller. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your drone.

The Cetus X frame is constructed from durable PA12 material, offering excellent impact resistance and 360° protection for safe flights. The FPV camera supports an adjustable angle from 0° to 40°, providing versatile viewing options during flight.

Sikkerhedsretningslinjer

Øvelse i at flyve: For beginners, it is highly recommended to practice flying drones via a simulator or Betaflight configurator to prevent damage from frequent crashes during initial flights.
Firmware kompatibilitet: Ensure all connected devices (transmitter, TX module, etc.) use the same ELRS V3 protocol and firmware version for successful binding.
ESC/Motor Settings: GØR IKKE change the ESC or Motor settings on the Betaflight configurator, BLHeli Configurator, or Bluejay Configurator. Doing so will invalidate the Flight Controller.
Batteriforbrug: The Cetus X Brushless Quadcopter requires two 1S batteries. It is not recommended to use different brand batteries.
Kameravinkel: The C04 FPV Camera supports an adjustable angle from 0° to 40°. Do not adjust the angle to exceed 40°, as this may damage the camera and cause signal loss.

Pakkens indhold

The following items are included in your Cetus X Brushless Quadcopter package:

1 * Cetus X Brushless Quadcopter
1 * BT2.0 Battery Charger and Voltage tester
2 * BT2.0 450mAh 1S 30C Battery
1 * Phillips Screwdriver
1 * Prop Removal Tool
1 * Type-C Adapter
4 * Gemfan 2020 4-Blades Props

All components included in the BETAFPV Cetus X package — **Figur 1:** All components included in the Cetus X package, neatly arranged next to the drone and its box.

Specifikationer

Punkt	Cetus X børsteløs Quadcopter
Vægt	55 g (1.94 ounce)
Akselafstand	95 mm
Flyveleder (FC)	F4 1S 12A FC V2.2 (ELRS 2.4G)
Motorer	1103 11000KV Motor
Propeller	Gemfan 2020 4-Blades Props
Kamera	C04 FPV Camera (480p Video Capture Resolution)
Kamera justerbar vinkel	0°-40°
Modtagerprotokol	ELRS 2.4G
Videosender (VTX)	M04 25-400mW VTX
Batteri	2*BT2.0 450mAh 1S 30C Battery (Lithium Polymer)
Flyvetid	5 min
Materiale	Nylon (PA12)
Produktdimensioner	6.8 cm L x 5.7 cm B x 2.3 cm H

BETAFPV Cetus X drone on a digital scale showing 54.4g — **Figur 2:** The Cetus X drone on a digital scale, indicating its lightweight design at approximately 55 grams.

Opsætning

Installation af batteri

Proper battery installation is crucial for safe operation. The Cetus X uses two 1S BT2.0 450mAh batteries.

Two BT2.0 450mAh 1S batteries connected to the Cetus X drone — **Figur 3:** Two 1S BT2.0 450mAh batteries connected to the Cetus X drone, secured with a strap.

Video 1: This video provides user tips for the Aquila16 Brushless Drone, including guidance on battery installation which is similar for Cetus X models.

Binding the Drone

To establish communication between your drone and transmitter, you must bind them. Ensure both devices use the ELRS 2.4G protocol and are on the same firmware version (ELRS V3).

Video 2: This video demonstrates the binding process for BETAFPV quads and radios, applicable to Betaflight versions of Cetus X.

Betjeningsvejledning

Justering af kameravinkel

The C04 FPV Camera's angle can be adjusted from 0° to 40°. At 0°, the frame and propellers may be visible in your FPV feed. Adjusting the angle to approximately 25° typically makes the frame and props invisible during flight, providing a clearer view.

Diagram showing the adjustable camera angle of the Cetus X drone from 0 to 40 degrees — **Figur 4:** Diagram illustrating the adjustable camera angle of the Cetus X drone, ranging from 0° to 40°.

Flymiljø

The Cetus X is suitable for both indoor and outdoor flight. For outdoor flying, choose calm conditions with little to no wind to ensure stable flight performance due to its lightweight design.

Activating Turtle Mode

Turtle Mode allows the drone to flip itself over if it lands upside down, enabling you to resume flight without manual intervention.

Video 3: This video provides instructions on how to activate Turtle Mode on BETAFPV drones, applicable to Betaflight versions of Cetus X.

Opretholdelse

Udskiftning af kamera

If your C04 FPV Camera needs replacement, follow the steps outlined in the video below. The camera is designed for plug-and-play installation.

**Figur 5:** Nærbillede view of the C04 FPV Camera on the Cetus X drone.

Video 4: This video demonstrates how to replace the camera on a Cetus Pro Drone, which uses a similar camera replacement process for the Cetus X.

Fejlfinding

Fixing Drifting Issues

If your drone experiences drifting during flight, it may require calibration or adjustment within the Betaflight software.

Video 5: This video provides guidance on fixing drifting issues in BETAFPV drones, applicable to Betaflight versions of Cetus X.

Loss of Video Signal

If you experience loss of video signal, ensure the camera angle is within the recommended 0°-40° range. Angles exceeding 40° can cause signal loss. Also, check all connections to the VTX module and camera.

Garanti og support

For warranty claims, technical support, or any product-related inquiries, please contact BETAFPV customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

	BETAFPV Cetus X børsteløs Quadcopter brugermanual Dette dokument indeholder en omfattende guide til BETAFPV Cetus X børsteløs quadcopter, der dækker produktindhold, preflight-tjek, bindingsprocedurer, VTX-frekvens og strømskift samt Betaflight-konfiguration.
	BETAFPV Cetus Lite FPV Kit brugermanual Omfattende brugermanual til BETAFPV Cetus Lite FPV-kittet, der dækker opsætning, flyveoperation, FPV-briller, fjernbetjeningssender, avancerede indstillinger og fejlfinding.
	Cetus FPV Drone Hurtigstartguide Comprehensive quick start guide for the Betafpv Cetus FPV drone. Learn about different flight modes including Normal, Sport, and Manual, speed settings, and optical flow positioning. Essential information for new pilots.
	BETAFPV Cetus FPV Kit brugermanual En omfattende brugermanual til BETAFPV Cetus FPV-sættet, der dækker produktdetaljer, preflight-tjek, hurtigstartguide, flyveoperationer, brug af fjernbetjening og FPV-briller, OSD-menu, LED-statuskoder, avancerede indstillinger og ofte stillede spørgsmål.
	BetaFPV Cetus FPV Kit Lynstartguide - Flytilstande og -indstillinger Get started quickly with the BetaFPV Cetus FPV Kit. This guide covers essential flight modes (Normal, Sport, Manual), speed control, and optical flow positioning settings, designed for ease of use and optimal FPV learning.
	BETAFPV Cetus FPV Kit Quick Start Guide A quick start guide for the BETAFPV Cetus FPV Kit, detailing Normal Mode, Sport Mode, Manual Mode, Speed Switch, and Optical Flow Positioning.

BETAFPV Cetus X