Pro-Ject Debut PRO S Turntable User Manual

Indledning

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Debut PRO S Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity of the product.

Pakkens indhold

Before proceeding with setup, verify that all components are present in the packaging:

• Pro-Ject Debut PRO S Turntable Unit
• Pick it S2 C integrated cartridge/headshell
• 10" Aluminum S-Shaped Tonearm (pre-installed)
• Precision aluminum platter with TPE damping
• TPE-Damped Die-Cast Aluminum Record Platter
• Støvbetræk
• Premium semisymmetrisk phonokabel
• Strømforsyning
• Modvægt
• Anti-skate vægt
• Setup tools (e.g., alignment protractor, stylus force gauge)

Opsætning

Proper setup is crucial for the performance of your turntable. Follow these steps carefully.

1. Udpakning og placering

Carefully remove all components from the packaging. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations. Ensure adequate ventilation around the unit.

Image: The Pro-Ject Debut PRO S Turntable, showcasing its sleek satin black finish and the S-shaped tonearm. This view highlights the overall design and footprint of the unit, important for placement considerations.

The turntable features height-adjustable TPE-damped metal feet. Adjust these feet to ensure the turntable chassis is perfectly level. This minimizes resonance and improves playback stability.

Billede: En vinklet view from below the turntable, illustrating the motor suspension system and the adjustable TPE-damped metal feet. Proper adjustment of these feet is essential for leveling the turntable and isolating it from vibrations.

2. Montering af tallerken og bælte

Carefully place the TPE-damped die-cast aluminum record platter onto the spindle. Locate the drive belt and loop it around the motor pulley and the sub-platter rim. Ensure the belt is not twisted.

Image: A schematic diagram illustrating the turntable's platter and belt drive mechanism. This visual aid helps in correctly installing the drive belt around the motor pulley and the sub-platter.

3. Opsætning af tonearm og patron

The Debut PRO S comes with a 10" S-shaped aluminum tonearm and a Pick it S2 C integrated cartridge/headshell pre-installed. You will need to balance the tonearm and set the tracking force.

1. Balancer tonearmen: Gently release the tonearm clamp. While supporting the tonearm, rotate the counterweight until the tonearm floats freely and horizontally.
2. Indstil sporingskraft: Once balanced, rotate the tracking force scale ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight counter-clockwise until the desired tracking force (typically specified by the cartridge manufacturer, usually around 1.8g for the Pick it S2 C) is indicated on the scale.
3. Indstil Anti-Skate: Attach the anti-skate weight to the small fishing line and loop it over the anti-skate post. The recommended setting for the Pick it S2 C cartridge is typically the second groove from the tonearm pivot.

Billede: En detaljeret view of the S-shaped tonearm, highlighting the counterweight and anti-skate mechanism. This image is crucial for understanding the physical components involved in balancing the tonearm and setting the tracking force.

Image: A close-up of the tonearm's pivot area, clearly showing the anti-skate weight and its attachment point. This detail assists users in correctly setting the anti-skate force.

The tonearm also supports VTA (Vertical Tracking Angle) and Azimuth adjustment for fine-tuning cartridge performance. Refer to advanced setup guides if you wish to adjust these parameters.

4. Forbindelser

Connect the premium semi-symmetrical phono cable from the turntable's RCA outputs to the phono input of your amplifier eller phono preamplifier. Ensure the ground wire is connected to the ground terminal on your amplifier to prevent hum.

Connect the power supply to the turntable's power input and then to a suitable wall outlet.

Betjeningsvejledning

Once set up, operating your Pro-Ject Debut PRO S Turntable is straightforward.

1. Powering On and Speed Selection

Locate the power switch, typically on the underside or side of the plinth. Turn the turntable on. The Debut PRO S supports multiple speeds, including 33 1/3, 45, and 78 RPM. Adjust the speed according to the record you are playing. For 78 RPM records, a special stylus may be required.

Billede: Et overheadbillede view of the Pro-Ject Debut PRO S Turntable, providing a clear perspective of the platter, tonearm, and the overall layout. This angle is useful for understanding the operational components.

2. Afspilning af en plade

1. Læg en plade på fadet.
2. Ensure the correct playback speed is selected.
3. Løft forsigtigt tonearmen ved hjælp af cue-håndtaget.
4. Position the stylus over the lead-in groove of the record.
5. Sænk langsomt cue-håndtaget, så pennen kan synke ned på pladen.
6. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clamp.

Opretholdelse

Regular maintenance will help preserve the performance and appearance of your turntable.

• Rengøring af chassiset: The turntable features an 8-coat hand-painted satin black MDF chassis. Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid abrasive cleaners or solvents.
• Rengøring af pennen: Use a dedicated stylus cleaning brush or fluid to carefully clean the stylus before or after each play. Always brush from back to front.
• Dustcover Care: The included dustcover protects the turntable from dust. Clean it with a soft, damp klæde. Brug ikke skrappe kemikalier.
• Bælteinspektion: Periodically inspect the drive belt for wear or stretching. Replace if necessary to maintain accurate playback speed.

Fejlfinding

If you encounter issues with your turntable, refer to the following common problems and solutions.

Specifikationer

Garanti og support

Garantioplysninger: Specific warranty terms and conditions for the Pro-Ject Debut PRO S Turntable are typically provided with the product packaging or can be found on the official Pro-Ject Audio Systems webwebsted. Gem venligst din købsbevis til garantikrav.

Kundesupport: For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject Audio Systems customer support or your authorized dealer. Contact information can usually be found on the manufacturer's webwebsted eller i produktdokumentationen.