1. Introduktion
Thank you for choosing the suptek Triple Monitor Mount MD8003. This manual provides essential instructions for safe installation, proper operation, and maintenance of your monitor mount. Please read this manual thoroughly before installation and retain it for future reference.
Sikkerhedsoplysninger
ADVARSEL: Failure to read and follow these instructions may result in personal injury or property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact suptek customer service.
- Ensure your desk can support the combined weight of the mount and three monitors.
- Overskrid ikke den maksimale vægtkapacitet på 10 kg pr. arm.
- Denne beslag er designet til skærme mellem 17 og 32 tommer.
- Verify your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
- Exercise caution when adjusting gas spring tension. Improper adjustment can cause monitors to move unexpectedly.
2. Pakkens indhold
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact suptek customer service.
Billedbeskrivelse: En overhead view of all the components included with the suptek Triple Monitor Mount MD8003, neatly arranged on a blue background. This includes the main pole, clamp and grommet parts, three articulating arms with gas springs, VESA plates, various screws, washers, and Allen wrenches.
Pakken indeholder typisk:
- Hovedpol
- Skrivebord Clamp Forsamling
- Grommet Base Komponenter
- Three Articulating Gas Spring Arms
- Three VESA Mounting Plates
- Kabelhåndteringsklemmer/dæksler
- Hardware-sæt (skruer, skiver, unbrakonøgler)
- Brugermanual
3. Specifikationer
Billedbeskrivelse: A graphic illustrating the compatibility requirements for the monitor mount. It shows icons for screen size (17-32 inches), maximum load (22 lbs per arm), and VESA compatibility (75x75mm / 100x100mm).
- Model: MD8003
- Skærmstørrelseskompatibilitet: 17 til 32 tommer
- Vægt kapacitet: 22 lbs (10 kg) pr. arm
- VESA-kompatibilitet: 75x75mm, 100x100mm
- Materiale: Legeret stål
- Bevægelsestype: Roter, drej, vip, artikuler
- Hældningsområde: ±80 grader
- Drejerækkevidde: ±180 grader
- Rotation: 360 degrees (for portrait or landscape orientation)
- Skrivebordstykkelse (Clamp/Grommet): Op til 3.85 tommer (98 mm)
4. Opsætning og installation
Follow these steps carefully to install your suptek Triple Monitor Mount MD8003.
Video Guide: Installation Demo
Videobeskrivelse: A comprehensive video demonstrating the step-by-step installation process of the suptek Triple Monitor Mount. It covers attaching the clamp/grommet, assembling the pole and arms, mounting monitors, and cable management.
Trin-for-trin installation
Billedbeskrivelse: A visual guide detailing the two primary installation methods for the monitor mount: a C-clamp attachment for the edge of a desk and a grommet base installation for desks with a pre-drilled hole. Both methods show the maximum compatible desk thickness.
- Install the Desk Base: Choose either the C-clamp or grommet installation method based on your desk and preference.
- C-Clamp Installation: Fastgør clamp support to the main pole using the provided screws. Position the clamp on the edge of your desk and tighten the plastic knob until secure. Ensure the desk thickness is within 3.85 inches.
- Installation af tylle: If your desk has a grommet hole (minimum 42mm diameter), assemble the grommet base components with the main pole. Insert the pole through the hole and secure it from underneath the desk using the provided plate and knob. Ensure the desk thickness is within 3.85 inches.
- Attach the Articulating Arms: Slide the swivel arms onto the main pole. Adjust their height and orientation as needed, then tighten the screws with the provided wrench to secure them in place. Ensure the arms are facing the correct direction for your desired monitor setup.
- Prepare Monitors for Mounting: Attach the VESA mounting plates to the back of each monitor using the appropriate screws (G1/G2) and washers (H1/H2) from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
- Mount the Monitors: Carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting bracket. Secure the monitor by screwing in the cap nut (O) or the screw that comes with the arm into the top of the bracket. Repeat for all three monitors.
- Initial Gas Spring Adjustment: Before fine-tuning, perform an initial gas spring adjustment to prevent monitors from sagging or springing up. Use the provided Allen wrench to adjust the tension screw on each arm. Turn med uret til reduce tension for lighter monitors, and mod uret til øge spændingen for heavier monitors. Adjust until the arm holds the monitor's weight without assistance.
5. Betjening og justeringer
The suptek Triple Monitor Mount MD8003 offers extensive adjustability for optimal viewkomfort.
Video Guide: Monitor Adjustments
Videobeskrivelse: A short video demonstrating the various adjustments possible with the suptek Triple Monitor Mount, including height, tilt, swivel, and rotation, showcasing the flexibility of the gas spring arms.
Billedbeskrivelse: A graphic detailing the range of motion for the monitor mount. It shows arrows indicating 360-degree rotation, ±90-degree swivel, and ±80-degree tilt, highlighting the flexibility for positioning monitors.
Billedbeskrivelse: A detailed illustration focusing on the gas spring adjustment mechanism. It shows an Allen wrench being used to turn a screw, with indicators for turning clockwise to reduce tension (for lighter monitors) and counter-clockwise to increase tension (for heavier monitors).
- Højdejustering: The gas spring arms allow for smooth vertical movement. Gently push or pull the monitor to the desired height. If the monitor does not stay in place, adjust the gas spring tension as described below.
- Gas Spring Tension Adjustment: Use the provided Allen wrench to adjust the tension screw located on the arm.
- Hvis skærmen raises up on its own, turn the screw med uret (towards the "-" direction) to reduce tension for a lighter monitor.
- Hvis skærmen falder ned, drej skruen mod uret (towards the "+" direction) to increase tension for a heavier monitor.
- Justering af hældning: Tilt the monitor screen up or down to achieve the optimal viewing angle. The mount supports a tilt range of ±80 degrees.
- Drejejustering: Swivel the monitor left or right to share your screen or adjust your viewing position. The mount allows for ±180 degrees of swivel.
- Rotation: Drej skærmen 360 grader for at skifte mellem liggende og stående retning.
Kabelstyring
Utilize the integrated cable management system to keep your workspace tidy.
- Open the cable covers on the underside of the arms.
- Route your monitor power and video cables through the channels.
- Close the cable covers to conceal the cables.
- Use the wire clip on the main pole to secure cables vertically.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din skærmbeslags levetid og sikker drift.
- Rensning: Tør holderen af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Periodiske kontroller: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre. Spænd efter om nødvendigt.
- Gas Spring Functionality: If the gas springs become difficult to adjust or no longer hold the monitor's weight, re-adjust the tension screw as described in the Operating section.
7. Fejlfinding
If you encounter issues with your suptek Triple Monitor Mount MD8003, refer to the following common problems and solutions:
- Monitor Sags or Does Not Stay at Desired Height:
This indicates insufficient gas spring tension for the monitor's weight. Use the provided Allen wrench to turn the gas spring tension screw mod uret (towards the "+" direction) to increase tension. Adjust gradually until the monitor holds its position. - Monitor Springs Up Unexpectedly:
This indicates too much gas spring tension for the monitor's weight. Use the provided Allen wrench to turn the gas spring tension screw med uret (towards the "-" direction) to decrease tension. Adjust gradually. - Monitors Are Not Level:
Ensure all VESA plates are securely attached to the monitors and the arms are properly tightened on the main pole. Minor leveling adjustments can often be made by slightly loosening and re-tightening the VESA plate screws or the arm's connection to the pole. - Mount føles ustabil:
Bekræft at skrivebordet eramp or grommet base is securely tightened to the desk. Ensure the desk itself is stable and capable of supporting the total weight. - Difficulty Moving Monitor Arms:
Check if any screws at the joints of the articulating arms are overtightened. Loosen them slightly if movement is restricted. If the issue is with height adjustment, refer to the gas spring tension adjustment.
8. Garanti og support
Specific warranty details for the suptek Triple Monitor Mount MD8003 are not provided in this document. For warranty information, technical support, or to report missing/damaged parts, please contact suptek customer service directly through their official webwebstedet eller forhandleren, hvor produktet blev købt.
Du kan også finde yderligere ressourcer og ofte stillede spørgsmål på suptek Store on Amazon.
