Introduktion og overview
This manual provides detailed instructions for the safe and efficient use of your Rockler 1250 CFM Dust Collector Filter Canister. This filter is designed to enhance the air quality in your workspace by capturing fine dust particles down to 1 micron. Proper installation, operation, and maintenance are crucial for optimal performance and longevity of the unit.
The Rockler 1250 CFM Dust Collector Filter Canister is an upgrade component for the Rockler 1250 CFM Wall Mount Dust Collector (sold separately, #54352).
Komponenter inkluderet
Kontroller, at alle nedenstående komponenter er til stede, før installationen påbegyndes:
- (1) 30" Canister Filter for Rockler Wall-Mount Dust Collector, 1250 CFM
- (1) Monteringsbeslag
- (1) 14-gallon Plastic Dust Bag
- Rem clamp (pre-installed or separate)
- Rubber gaskets (for a tight seal)

Opsætning og installation
This canister filter is designed as an upgrade for the Rockler 1250 CFM Wall Mount Dust Collector (#54352). Ensure your dust collector is unplugged and powered off before proceeding with installation.
- Remove Existing Filter: Carefully detach and remove the existing filter bag from your Rockler 1250 CFM Wall Mount Dust Collector. Dispose of any collected dust properly.
- Fastgør monteringsbeslag: Secure the provided mounting bracket to the dust collector's housing where the filter attaches. Ensure a tight and stable connection.
- Install Canister Filter: Position the new 1-micron canister filter onto the dust collector. Ensure the rubber gaskets are properly seated to create an airtight seal between the filter and the collector housing.
- Secure Canister: Use the strap clamp to firmly secure the canister filter to the dust collector. Verify that the filter is stable and does not wobble.
- Attach Dust Bag: Connect the 14-gallon plastic dust bag to the bottom of the canister filter. Ensure the bag is securely fastened to prevent dust leakage.

Betjeningsvejledning
Once the canister filter is properly installed, you can operate your dust collector as usual. The 1-micron filter will significantly improve the filtration efficiency.
- Tænd: Plug in your Rockler 1250 CFM Wall Mount Dust Collector and turn it on.
- Tilslut slanger: Ensure all dust collection hoses are securely connected to your woodworking machinery.
- Overvåg ydeevne: Observe the dust collection performance. The improved filtration will result in cleaner air in your workshop.
Opretholdelse
Regular maintenance of the canister filter is essential to maintain optimal filtration efficiency and prolong the life of your dust collector.
Rengøring af beholderfilteret
The canister filter features a crank-style cleaner to easily dislodge dust from the pleated fabric.
- Turn Off Dust Collector: Always ensure the dust collector is turned off and unplugged before performing any maintenance.
- Rotate Crank Handle: Locate the large crank handle on top of the canister filter. Turn the handle clockwise and counter-clockwise several times. This action rotates an internal agitator that shakes dust off the pleats, allowing it to fall into the collection bag.
- Frekvens: Clean the filter regularly, especially after significant use or when you notice a decrease in suction power.

Tømning af støvposen
The included 14-gallon plastic dust bag collects the dislodged dust for easy disposal.
- Turn Off Dust Collector: Ensure the dust collector is turned off and unplugged.
- Detach Dust Bag: Carefully unfasten the strap clamp or other securing mechanism holding the plastic dust bag to the bottom of the canister filter.
- Dispose of Dust: Remove the full dust bag and dispose of its contents according to local regulations.
- Reattach Bag: Securely attach a new 14-gallon plastic dust bag (or the emptied one, if reusable and clean) to the canister filter, ensuring a tight seal.
Fejlfinding
This section addresses common issues you might encounter with your Rockler 1250 CFM Dust Collector Filter Canister.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Reduceret sugekraft | Clogged filter pleats, full dust bag, loose hose connections. | Clean the canister filter using the crank handle. Empty the dust bag. Check and tighten all hose connections. |
| Dust Leaking from Canister | Improperly seated gaskets, loose strap clamp, damaged dust bag. | Ensure rubber gaskets are correctly positioned. Tighten the strap clamp. Inspect the plastic dust bag for tears and replace if necessary. |
| Crank Handle is Stiff | Excessive dust buildup on agitator, internal obstruction. | Ensure the dust collector is off. Gently try to free the agitator. If persistent, inspect for obstructions. |
Specifikationer
- Filtration Rating: 1 mikron
- Taskekapacitet: 14 gallons (1.87 cubic feet)
- Top Diameter: 15"
- Indløbsdiameter: 5"
- Bottom Diameter: 15-1/4"
- Canister Height: 30" (without plastic bag)
- Kompatibel enhed: Rockler 1250 CFM Dust Collector
- Materiale: Durable Steel Frame (supports fabric pleats)
- Varens vægt: 23.3 pund
- Pakkedimensioner: 36.4 x 18 x 17 tommer
- Genanvendelighed: Reusable (filter and bag if cleaned)
- Antal stykker: 1 (canister filter unit)
- UPC: 733175548182
Garanti og support
For warranty information, please refer to the documentation provided with your original Rockler 1250 CFM Wall Mount Dust Collector or visit the official Rockler website. For technical support, replacement parts, or further assistance, please contact Rockler customer service.
Rockler Customer Service:
- Webwebsted: www.rockler.com
- Kontaktoplysninger: Der henvises til website for current phone numbers and email support.





