Obsidian NXK ONYX Control Surface User Manual

Indledning

The Obsidian NXK ONYX Control Surface is an additional control surface designed to enhance the functionality and user experience of ONYX-enabled lighting controllers. It provides tactile control over various parameters, streamlining programming and live operation for lighting professionals.

This image displays the Obsidian NXK ONYX Control Surface, featuring a grid of backlit buttons, a numeric keypad, and several rotary encoders at the top. The device has a dark gray textured finish with a black base displaying the 'NXK' logo.

Opsætning

Follow these steps to set up your NXK ONYX Control Surface:

1. Udpakning: Carefully remove the NXK Control Surface from its packaging. Inspect for any visible damage.
2. Placering: Place the control surface on a stable, flat surface near your ONYX-enabled lighting controller or computer.
3. Forbindelse: Connect the NXK Control Surface to your ONYX-enabled device using a standard USB cable. The device is typically powered via USB, eliminating the need for an external power supply.
4. Driverinstallation (hvis påkrævet): In most cases, the NXK is plug-and-play. If your operating system does not automatically recognize the device, visit the official Obsidian webwebsted for de nyeste drivere og softwareopdateringer.
5. Softwarekonfiguration: Launch your ONYX lighting control software. The NXK Control Surface should be detected automatically. Refer to your ONYX software manual for specific configuration settings related to external control surfaces.

Operating the NXK Control Surface

The NXK Control Surface provides dedicated buttons and encoders for efficient control of your ONYX lighting system. Familiarize yourself with the layout and functions:

Top Rotary Encoders

The top row features several rotary encoders, typically used for parameter adjustment, intensity control, or navigation within menus. Their specific function will depend on the active mode or selected fixture in the ONYX software.

Function Buttons (Top Rows)

• Menu: Access the main menu or context-sensitive options.
• Makro: Trigger pre-programmed macros.
• Snap Shot: Capture the current state of the lighting rig.
• Bank: Switch between different banks of faders or playbacks.
• Preview: Enter or exit preview mode for programming.
• Højt lys: Activate highlight mode for selected fixtures.
• Falme: Adjust fade times for cues or changes.
• Forsinke: Set delay times for actions.
• Swap Prog: Swap between programmer and playback.
• Forbindelse: Link cues or events.
• Last / Next: Navigate through cues or lists.

Editing and Navigation Buttons

• Redigere: Enter edit mode for selected items.
• Fortryd: Revert the last action.
• Klar: Clear the programmer or selection.
• Kopi: Copy selected elements.
• Flytte: Move selected elements.
• Slet: Delete selected elements.

Numeric Keypad and Modifiers

The numeric keypad (0-9, ., Enter) is used for direct value entry. Additional modifier buttons include:

• / (Slash): Often used for division or specific command syntax.
• - (Minus): Used for subtraction or negative values.
• + (Plus): Used for addition or positive values.
• ← (Back Arrow): Backspace or navigate back.
• Gennem: Select a range of fixtures or cues.
• Fuld: Set intensity to full.
• @ (At): Used for setting values or specific commands.

Playback and Recording Buttons

• Optage: Initiate recording of cues or sequences.
• Opdatering: Update existing cues or presets.
• Indlæs: Load cues or shows.
• Gruppe: Create or select fixture groups.
• Stikord: Access or trigger specific cues.

For detailed operational procedures and advanced functions, please refer to the comprehensive ONYX software manual.

Opretholdelse

Proper maintenance ensures the longevity and optimal performance of your NXK Control Surface:

• Rensning: Use a soft, dry, lint-free cloth to wipe the surface of the device. For stubborn marks, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Avoid abrasive cleaners, solvents, or aerosol sprays.
• Opbevaring: When not in use for extended periods, store the control surface in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• Kabelstyring: Ensure USB cables are not kinked or strained, as this can damage the cable or the port on the device.
• Softwareopdateringer: Regularly check the Obsidian website for firmware updates for the NXK Control Surface and software updates for your ONYX system to ensure compatibility and access to new features.

Fejlfinding

If you encounter issues with your NXK Control Surface, try the following troubleshooting steps:

• Enhed ikke genkendt:
  • Ensure the USB cable is securely connected to both the NXK and your computer/controller.
  • Prøv en anden USB-port.
  • Prøv et andet USB-kabel.
  • Restart your computer/controller and the ONYX software.
  • Check the device manager (Windows) or System Information (macOS) to see if the device is listed.
  • Install or update the latest drivers from the Obsidian webwebsted.
• Buttons/Encoders Unresponsive:
  • Verify that the NXK is properly recognized by the ONYX software.
  • Ensure the ONYX software is the active window and not minimized.
  • Check for any software conflicts with other USB devices.
  • Perform a firmware update if available.
• Intermitterende forbindelse:
  • Avoid using unpowered USB hubs; use a powered hub if necessary.
  • Ensure the USB cable is not excessively long.
  • Kontroller for elektromagnetisk interferens fra andre enheder.

If the issue persists after trying these steps, please contact Obsidian technical support.

Specifikationer

Garanti og support

Garantioplysninger: The Obsidian NXK ONYX Control Surface comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Obsidian webwebstedet for detaljerede vilkår og betingelser vedrørende garantidækning og varighed.

Teknisk support: For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Obsidian customer support. Contact information can typically be found on the Obsidian webwebstedet eller i din produkts emballage.

Bemærk: Gem din købsbevis i tilfælde af garantikrav.