EJEAS MS8

EJEAS MS8 Motorcykelhjelm Bluetooth Intercom Brugermanual

Model: MS8 | Brand: EJEAS

1. Introduktion

The EJEAS MS8 is an advanced motorcycle helmet Bluetooth intercom system designed for seamless group communication. Featuring new Mesh technology, Bluetooth 5.1, and CVC noise reduction, it provides stable and clear communication for up to 8 riders. This manual will guide you through the installation, operation, and maintenance of your MS8 intercom system.

Two EJEAS MS8 intercom units, black with purple and blue accents.

Figure 1: EJEAS MS8 Mesh Intercom Units

2. Hvad er der i æsken

Kontroller venligst indholdet af din pakke for at sikre, at alle varer er til stede:

  • 2* MS8 Mesh Intercom Units
  • 2* Ear Speaker and Two Microphone Sets
  • 2* Accessory Post and Accessory Clip Sets
  • 2* Type-C opladningskabler
  • 1* Brugervejledning
Contents of the EJEAS MS8 package, including two intercom units, speakers, microphones, clips, cables, and manual.

Figur 2: Pakkens indhold

3. Produktfunktioner

  • 3.1. 8-Rider Mesh Intercom

    The MS8 utilizes new Mesh technology, allowing up to 8 riders to communicate simultaneously. The maximum connection distance for two units is 1.8 KM, extending to approximately 3.5-7 KM for an 8-person group. The system automatically disconnects or reconnects when riders move in or out of the effective range, ensuring continuous communication.

    Diagram illustrating 8 riders connected via Mesh Intercom technology on a road.

    Figure 3: 8-Rider Mesh Intercom Network

    Image of multiple motorcyclists on a winding road, emphasizing a 7000-meter communication range.

    Figure 4: Extended Communication Range

  • 3.2. Qualcomm Bluetooth 5.1

    Equipped with an optimized Qualcomm Bluetooth 5.1 chip, the MS8 offers faster data transmission speeds and a longer, more stable, and reliable connection distance for your communication needs.

    Diagram showing a microchip with '5.1' indicating Bluetooth 5.1 technology, highlighting faster pairing, stable signal, and low energy.

    Figur 5: Bluetooth 5.1-teknologi

  • 3.3. CVC Noise Reduction Technology

    The MS8 incorporates advanced CVC (Clear Voice Capture) noise reduction technology to effectively eliminate echo and ambient noise during calls, ensuring crystal clear audio quality even at high speeds.

  • 3.4. 1200mAh Large Battery

    A high-capacity 1200mAh rechargeable battery provides extended standby and usage times. The Type-C adapter design supports simultaneous charging and operation, ideal for long rides.

  • 3.5. Multiple Functions

    The MS8 includes an FM radio for listening to music and road conditions. It boasts an IP67 waterproof rating, allowing use in rainy conditions. It is compatible with mobile phones, MP3 players, older EJEAS intercom models, and other Bluetooth devices. Features include auto-receiving calls, last phone number redial, voice assistant, and microphone mute function.

    A motorcyclist riding with a smartphone displaying a music player interface, demonstrating simultaneous intercom and music functionality.

    Figure 6: Intercom and Music Simultaneously

    Four panels: a battery icon with '1200mAh', a helmet showing clip installation, a hand pressing a large button on the intercom, and a speaker cone for Hi-Fi Stereo Sound.

    Figur 7: Nøglefunktioner ovenforview (Battery, Installation, Controls, Sound)

4. Opsætning og installation

Proper installation ensures optimal performance and comfort. The MS8 is designed to be compatible with most helmet types.

4.1. Mounting the Intercom Unit

There are typically two methods for mounting the MS8 unit to your helmet: a clip mount or an adhesive mount. Choose the method that best suits your helmet and preference.

4.2. Installation af højttalere og mikrofon

Place the speakers inside the helmet's ear pockets, ensuring they are aligned with your ears for clear audio. Secure the microphone in front of your mouth, typically on the left side, ensuring it is close enough to pick up your voice clearly but not obstructing your vision.

4.3. Opladning af enheden

Before first use, fully charge the MS8 unit using the provided Type-C charging cable. Connect the cable to the MS8 unit and a standard USB power adapter (DC5V/1A recommended). The indicator light will show charging status.

Detailed step-by-step images for two types of clip installations and headphone installation within a helmet.

Figure 8: Helmet Installation Steps (Clip and Headphone)

5. Betjeningsvejledning

5.1. Tænd/sluk

  • Tænd: Tryk på tænd/sluk-knappen, og hold den nede i cirka 3 sekunder, indtil indikatorlampen blinker.
  • Sluk: Tryk på tænd/sluk-knappen og hold den nede i cirka 3 sekunder, indtil indikatorlampen slukker.

5.2. Bluetooth Pairing (with Mobile Phone)

  1. Ensure the MS8 is powered off.
  2. Press and hold the Power button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
  3. On your mobile phone, enable Bluetooth and search for "EJEAS MS8".
  4. Select "EJEAS MS8" to connect. Once connected, the indicator light will flash blue slowly.

5.3. Mesh Intercom Operation

The MS8's Mesh Intercom allows for dynamic group communication without traditional pairing.

  • Initiating Mesh Intercom: With the unit powered on, press the Mesh button (M button) once. The unit will enter Mesh mode and automatically search for other MS8 units within range to form a group.
  • Joining a Group: Simply power on your MS8 and activate Mesh mode. It will automatically join any active Mesh group within range.
  • At forlade en gruppe: Press the Mesh button again to exit Mesh mode.

5.4. Musikafspilning

  • Afspil/pause: Tryk én gang på tænd/sluk-knappen.
  • Næste nummer: Tryk på '+'-knappen.
  • Forrige nummer: Tryk på '-' knappen.
  • Lydstyrke op: Tryk på '+'-knappen og hold den nede.
  • Skrue ned for lyden: Tryk på '-'-knappen og hold den nede.

When in Mesh mode, music will automatically pause when someone speaks and resume after 5 seconds of silence.

5.5. FM Radio

  • Turn On/Off FM: Press the FM button (if available, or a combination of buttons as per specific model instructions).
  • Scan kanaler: Press the '+' or '-' button briefly to scan for the next/previous station.

5.6. Telefonopkald

  • Besvar opkald: Tryk én gang på tænd/sluk-knappen.
  • Afslut opkald: Press the Power button once during a call.
  • Afvis opkald: Tryk og hold tænd/sluk-knappen nede i 2 sekunder.
  • Genopkald sidste nummer: Dobbelttryk på tænd/sluk-knappen.
  • Aktiver stemmeassistent: Triple-press the Power button.
  • Mikrofon mute: Refer to specific button combination in the quick start guide for this function.

6. Vedligeholdelse

  • Rensning: Tør enheden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
  • Opbevaring: Opbevar enheden et køligt og tørt sted, når den ikke er i brug. Undgå ekstreme temperaturer.
  • Batteripleje: To prolong battery life, charge the unit regularly, even if not used for extended periods. Avoid fully discharging the battery frequently.
  • Vandtæthed: While IP67 waterproof, avoid submerging the unit in water for prolonged periods. Ensure the Type-C port cover is securely closed.

7. Fejlfinding

  • 7.1. Enheden tænder ikke

    Ensure the battery is charged. Connect the unit to a power source and try again after a few minutes of charging.

  • 7.2. No Sound from Speakers

    Check if the speakers are properly connected to the unit. Ensure the volume is not set to minimum. Verify that the unit is connected to the correct audio source (phone, intercom, FM).

  • 7.3. Cannot Pair with Phone/Other Intercoms

    Ensure both devices are in pairing mode. Keep devices within close proximity during pairing. If issues persist, try resetting the MS8 unit (refer to the quick start guide for reset procedure) and re-attempt pairing.

  • 7.4. Intercom Range is Short or Connection is Unstable

    Ensure there are no major obstructions between units. Check for strong electromagnetic interference. For Mesh Intercom, ensure all units are within the effective range and not too spread out.

8. Specifikationer

A diagram showing the dimensions of the MS8 unit and a table of technical specifications including intercom mode, Bluetooth version, battery, and charging time.

Figur 9: Produktmål og specifikationer

FeatureDetalje
ModelnavnMS8 2Pack
ForbindelsesteknologiTrådløs (Bluetooth)
Trådløs kommunikationsteknologiBluetooth 5.1
Intercom-tilstand8-person Mesh Intercom, Unlimited listening
Intercom Distance (2 units)1.8 KM
Intercom Distance (8 units)3.5-7 KM
Batterikapacitet1200mAh (3.7V)
Taletid7 timer
Musik Tid14 timer
Standby tid300 timer
Opladningstid3 timer
Oplader specifikationType-C USB (DC5V/1A)
VandmodstandsniveauIP67
StøjreduktionCVC-støjreduktion
Driftstemperaturområde-10 til 50°C
KontroltypeVoice Control, Buttons
MaterialePlast

9. Garanti og support

EJEAS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official EJEAS webwebsted. Gem venligst din købsbevis til garantikrav.

Relaterede dokumenter - MS8

Preview EJEAS MS8-SE / MS8-S Motorcykel Intercom: Brugermanual og funktioner
Omfattende guide til EJEAS MS8-SE og MS8-S motorcykelintercom-systemerne, der dækker installation, betjening, parring, funktioner som MESH-intercom, Bluetooth, FM-radio, stemmeassistent og sikkerhedsoplysninger.
Preview EJEAS V4 Plus Motorcykel Intercom System Brugervejledning
Brugermanual til EJEAS V4 Plus motorcykelintercom-systemet, der beskriver produktets funktioner, installation, betjening, Bluetooth-parring og FCC-overholdelse. Denne enhed er en Bluetooth-walkie-talkie til op til 4 motorcyklister med en rækkevidde på 1500 meter og en vandtæthedsklassificering i henhold til IP65.
Preview EJEAS Q8 Mesh Group Intercom System Brugervejledning
Omfattende brugermanual til EJEAS Q8 Mesh Group Intercom-systemet, der beskriver produktets funktioner, installation, betjening, parring og kontroller til motorcykelkommunikation.
Preview EJEAS AiH2 Motorcykelhjelm Intercom System Brugermanual
Denne brugermanual indeholder detaljerede instruktioner til betjening af EJEAS AiH2 intercom-systemet til 4 personer med motorcykelhjelm. Den dækker grundlæggende betjening, menu navigation, mesh intercom-funktioner, parring af mobiltelefoner, opkaldshåndtering, stemmeassistent, musikstyring, valgfri fjernbetjening og firmwareopgraderinger.
Preview EJEAS Q8 Mesh Motorcycle Intercom System User Manual
Comprehensive user manual for the EJEAS Q8 mesh motorcycle intercom system, detailing features like group intercom, Bluetooth connectivity, music sharing, FM radio, voice assistant, installation, and operation.
Preview Panduan Pengguna EJEAS V6 Pro+ 6-Riders Sistem Interkom Helm Sepeda Motor
Panduan pengguna lengkap untuk system interkom helm Bluetooth EJEAS V6 Pro+ 6-Riders. Pelajari tentang instalasi, pemasangan telefon, fungsi interkom, pengendali jauh EUC, integrasi aplikasi seluler, og tindakan pencegahan keselamatan untuk pengendara sepeda motor.