Parkside LIDL IAN 305729 Roterende vaskebørste til højtryksrenser PHD 150 G4 Brugsanvisning

1. Introduktion

This manual provides essential information for the safe and effective use of your Parkside LIDL IAN 305729 Rotary Washing Brush. This accessory is designed to be used with the Parkside PHD 150 G4 pressure washer for cleaning various surfaces. Please read these instructions carefully before first use and keep them for future reference.

2. Produktet er slutview

The Parkside LIDL IAN 305729 Rotary Washing Brush is an accessory specifically designed for the Parkside PHD 150 G4 pressure washer. It is ideal for cleaning large, smooth surfaces such as vehicles, lacquered surfaces, glass, plastic, terraces, driveways, garage doors, and facades. The brush provides gentle yet effective cleaning, removing fine dust and gray films.

Nøglefunktioner:

• Rotary washing brush accessory for Parkside pressure washers.
• Compatible with Parkside PHD 150 G4 (LIDL IAN 305729).
• Designed for gentle and effective cleaning of smooth surfaces.
• Suitable for removing gray film and fine dust.
• Robust plastic construction.

Billede 1: Forside view of the Parkside Rotary Washing Brush, showing the white bristles and black handle.

Billede 2: Vinklet view of the rotary washing brush, highlighting the brush head and connection point.

3. Opsætning

Before attaching the rotary washing brush, ensure your Parkside PHD 150 G4 pressure washer is turned off and disconnected from the power supply and water source.

1. Prepare the Pressure Washer: Ensure the pressure washer's spray lance or appropriate attachment point is clean and free from debris.
2. Attach the Rotary Brush: Align the connector of the rotary washing brush with the attachment point on your pressure washer's lance. Push firmly until it clicks securely into place. A red O-ring on the connector ensures a tight seal.
3. Sikker forbindelse: Verify that the brush is firmly attached and does not wobble. The yellow adjustment knob on the brush handle can be used to adjust the angle of the brush head for optimal cleaning.

Image 3: Close-up of the rotary washing brush's connection point, showing the red O-ring for secure attachment to the pressure washer lance.

Image 4: Detail of the yellow adjustment knob on the brush handle, used for setting the brush head angle.

4. Betjeningsvejledning

Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when operating a pressure washer and its accessories.

1. Connect Water and Power: Once the brush is securely attached, connect your pressure washer to a water source and power supply according to its own instruction manual.
2. Testområde: Before cleaning the main surface, test the brush on an inconspicuous area to ensure it does not cause damage or discoloration.
3. Start rengøring: Turn on the pressure washer. Hold the rotary brush firmly and apply it to the surface to be cleaned. The water pressure will cause the brush head to rotate, providing a scrubbing action.
4. Hold afstand: Keep a consistent distance from the surface to ensure even cleaning and prevent potential damage. The brush is designed for gentle cleaning, but excessive pressure or prolonged contact in one spot can still affect delicate surfaces.
5. Juster vinkel: Use the yellow adjustment knob to change the angle of the brush head as needed for different cleaning tasks or surface contours.
6. Skylle: After scrubbing with the rotary brush, you may wish to rinse the surface with a standard pressure washer nozzle to remove loosened dirt and detergent residue.
7. Slutte: When finished, turn off the pressure washer, disconnect it from power and water, and release any residual pressure before detaching the brush.

Billede 5: Side view of the rotary washing brush, illustrating its extended form for reaching surfaces.

Billede 6: Top-down view of the brush head, showing the circular bristle arrangement for effective rotation and cleaning.

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your rotary washing brush.

• Rensning: After each use, rinse the brush head thoroughly with clean water to remove any dirt, debris, or detergent residue from the bristles.
• Inspektion: Regularly inspect the bristles for wear or damage. Check the connection point for any signs of cracks or leaks.
• Opbevaring: Store the rotary washing brush in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is completely dry before storage to prevent mildew or damage to the bristles.
• Ingen demontering: Do not attempt to disassemble the brush head or internal components, as this may void any potential warranty and could damage the product.

6. Fejlfinding

This section addresses common issues you might encounter with the rotary washing brush.

• Børsten roterer ikke:
  • Ensure the pressure washer is operating at sufficient pressure.
  • Check for blockages in the brush head or water inlet.
  • Verify the brush is securely attached to the pressure washer lance.
• Water Leakage at Connection:
  • Ensure the brush is fully and correctly seated on the pressure washer lance.
  • Inspect the O-ring on the brush connector for damage or wear. Replace if necessary.
• Ineffektiv rengøring:
  • Ensure the bristles are clean and free from embedded debris.
  • Adjust the angle of the brush head for better contact with the surface.
  • Consider using an appropriate cleaning detergent with your pressure washer, if suitable for the surface.

If you experience issues not covered here, please refer to your Parkside PHD 150 G4 pressure washer manual or contact customer support.

7. Specifikationer

8. Garanti og support

Specific warranty information for this accessory is not provided in the product details. Please refer to the warranty documentation included with your Parkside PHD 150 G4 pressure washer or contact Parkside customer support for details regarding accessories.

For technical support or inquiries, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.