1. Introduktion
The GODIAG GT101 Power Circuit Probe Tester is a versatile diagnostic tool designed for automotive electrical systems. It simplifies the process of testing circuits, identifying faults, and activating components in vehicles operating on DC 6V to 40V. This manual provides detailed instructions for safe and effective use of the device.
Image 1.1: The GODIAG GT101 Power Circuit Probe Tester kit, including the main unit, test leads, and carrying case.
2. Sikkerhedsoplysninger
Always observe the following safety precautions when using the GODIAG GT101 to prevent personal injury or damage to the vehicle or tester:
- Bær passende øjenbeskyttelse.
- Do not use the tester if the cable is damaged or if the unit is not functioning correctly.
- Ensure the vehicle's ignition is off before connecting or disconnecting the tester, unless specific test procedures require otherwise.
- Undgå kontakt med varme motordele eller bevægelige komponenter.
- Anvend ikke voltage to components that are not designed to receive it.
- The tester is designed for DC 6V-40V systems only. Do not use it on AC circuits or systems outside this voltage rækkevidde.
- The built-in circuit breaker will trip if the current exceeds 20A. Do not attempt to bypass or modify this safety feature.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- GODIAG GT101 Power Circuit Probe Tester Host
- Test Leads (with battery clips)
- Probe tip
- Testledning til brændstofinjektor
- 10mm brændstofinjektor rengøringsstik
- 12mm brændstofinjektor rengøringsstik
- Simple Relay Test Adapter
- Simple Relay Connection Leads
- Hjælpejordledning
- Brugervejledning (engelsk)
- Bæretaske
Image 3.1: Visual representation of the GODIAG GT101 package contents.
4. Produktet er slutview
4.1 Komponenter
Familiarize yourself with the main components of the GT101 tester:
Image 4.1: Labeled diagram of the GT101 tester, showing the flashlight, probe tip, display, power switch, model button, fuel injector and relay adapter, auxiliary ground lead, test clamps, and fuel injector connection line.
4.2 Nøglefunktioner
The GODIAG GT101 offers a range of functionalities for comprehensive electrical system diagnostics:
- Voltage and Polarity Testing: Identificer hurtigt positive, negative og åbne kredsløb.
- Kontinuitetstest: Check for circuit continuity.
- Test af signalkredsløb: Analyze signal circuits.
- Current Testing: Measure current flow in circuits.
- Beskyttelse af maksimalafbryder: Integrated 10A circuit breaker for safety.
- Relay Testing: Diagnose relay functionality.
- Injector Testing and Cleaning: Test and clean fuel injectors using the provided adapters.
- Komponentaktivering: Safely activate components both in and out of the vehicle.
- Poor Ground Testing: Identify faulty ground connections.
- Tracking and Locating Shorts: Pinpoint short circuits efficiently.
- 20ft Test Cord: Provides extended reach for testing.
- Digital farveskærm: Clear display of voltage and current data.
- Indbygget lommelygte: Illuminates work areas in low light conditions.
Billede 4.2: Overview of the GT101's multifunctional capabilities.
5. Opsætning
The GODIAG GT101 does not require additional batteries as it draws power directly from the vehicle's electrical system.
- Tilslut til strømkilde: Attach the red battery clip to the vehicle's positive (+) battery terminal and the black battery clip to the negative (-) battery terminal. Alternatively, use the cigarette lighter adapter to power the device.
- Selv test: The GT101 performs a quick self-test upon power-up to ensure it is in good working condition.
- Extend Test Lead: Utilize the 20-foot extension cord for enhanced accessibility when testing various points around the vehicle.
Image 5.1: Powering the GT101 via car battery clips or cigarette lighter adapter.
6. Betjeningsvejledning
The GT101 is designed for use on DC 6-40V vehicle electrical systems, including cars, motorcycles, trucks, buses, construction vehicles, ships, and tractors.
6.1 bindtage and Polarity Testing
Touch the probe tip to the circuit or component to be tested. The digital display will show the voltage, and the LED indicator lights will indicate polarity:
- Rødt indikatorlys: Indicates a positive (+) circuit. A short, quick buzzer sound will accompany this.
- Grønt indikatorlys: Indicates a negative (-) circuit. A gentle buzzer sound will accompany this.
Image 6.1: Polarity indication using the GT101's LED lights.
6.2 Kontinuitetstest
To perform a continuity test, connect the auxiliary ground lead to a known good ground. Touch the probe tip to the component or wire you wish to test. If the circuit is continuous, the tester will indicate continuity (e.g., a specific light or sound, refer to device display for exact indication).
6.3 Signalkredsløbstest
Connect the probe to the signal wire. The tester will display the signal voltage, allowing for diagnosis of signal integrity.
6.4 Aktuel test
The GT101 can measure current. Refer to the device's display for current readings. Ensure the circuit does not exceed the 20A limit of the built-in circuit breaker.
6.5 Circuit Breaker Protection
The tool features a built-in 10 amp circuit breaker. If the current drawn during testing exceeds 20A, the breaker will automatically trip to protect the equipment and the vehicle's electrical system. Reset the breaker before continuing operations.
6.6 Relætest
Use the provided Simple Relay Test Adapter and Connection Leads to test automotive relays. Connect the adapter to the relay and the GT101. The tester can activate the relay and check its operational status.
6.7 Injector Test and Cleaning
The GT101 includes a DIY injector cleaning adapter kit.
- Injector Test: Connect the fuel injector to the GT101 using the appropriate adapter. The tester can drive the injector to open and close. Observe the current display; a normal value indicates a functional injector. Abnormal readings suggest damage.
- Injector Cleaning: If an injector is clogged, connect it to the GT101 and a pressurized cleaning tank (not included). The GT101 can activate the injector to facilitate cleaning.
Image 6.2: Steps for fuel injector testing and cleaning.
6.8 Component Activation and Testing
The GT101 can supply power to electrical components for activation and testing. This allows for verification of component function without needing to fully reassemble the circuit. Use caution to avoid over-powering components.
6.9 Poor Ground Testing
By applying a known good ground or positive voltage, the GT101 can help identify poor ground connections in a circuit.
6.10 Tracking and Locating Shorts
The GT101 can assist in tracing and locating short circuits by providing power and monitoring current draw, helping to isolate the fault area.
Billede 6.3: Eks.amples of GT101 applications in diagnosing vehicle electrical issues.
7. Vedligeholdelse
- Rensning: Wipe the tester and leads with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the GT101 and its accessories in the provided carrying case in a dry, cool place away from direct sunlight and extreme temperatures.
- Kabelinspektion: Regularly inspect the test leads and power cables for any signs of damage, such as cuts, fraying, or exposed wires. Replace damaged components immediately.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Testeren tænder ikke. | Incorrect power connection; vehicle battery low; faulty cable. | Ensure battery clips are securely connected to the correct terminals or cigarette lighter is functional. Check vehicle battery voltage. Inspect power cables for damage. |
| Afbryderen udløses ofte. | Excessive current draw; short circuit in the tested component. | Verify the component's current requirements. Check the component or circuit for short circuits before testing. |
| Unøjagtig voltage aflæsninger. | Poor connection; dirty probe tip; faulty ground. | Ensure a clean and firm connection. Clean the probe tip. Verify the ground connection. |
| Tester beeps continuously without clear indication. | Internal fault; specific error mode. | Perform a self-test. If the issue persists, contact customer support. |
9. Specifikationer
- Operation Voltage: DC 6V - 40V
- Afbryder: 10A (auto-reset)
- Test Lead Length: 20 fod
- Vise: Digital Color Display
- Dimensioner: 6.7 x 5.9 x 1.97 tommer
- Vægt: 2.18 pund
- Fabrikant: GODIAG
- Modelnummer: GT101
10. Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact GODIAG customer service directly. You may also visit the official GODIAG store on Amazon for additional resources and contact details: GODIAG Store.
