TWIG 5-Light Farmhouse Linear Chandelier Instruction Manual

1. Introduktion

Welcome to your new TWIG 5-Light Farmhouse Linear Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Image 1.1: The TWIG 5-Light Farmhouse Linear Chandelier installed in a dining room setting.

2. Vigtige sikkerhedsoplysninger

For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge disse sikkerhedsforanstaltninger:

• Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation, cleaning, or maintenance.
• Consult a qualified electrician if you are unsure about the wiring process.
• Håndter glaskomponenter forsigtigt for at forhindre brud og skader.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede.
• Dette armatur er kun designet til indendørs brug.
• Initial Odor Note: This product is handmade and uses environmental protective coatings. An initial odor may be present upon opening the packaging. It is recommended to air out the product in a well-ventilated environment for a period of time before installation.

3. Pakkens indhold

Please verify that all parts are present before discarding packaging materials:

• 1 x TWIG 5-Light Farmhouse Linear Chandelier (Model 2024072303)
• Mounting Hardware (includes mounting plate, screws, wire nuts, canopy nuts)
• Justerbare hængestænger
• Glasskærme (5 stk.)

Note: Light bulbs are not included with this fixture.

4. Produktspecifikationer

Image 4.1: Product dimensions and adjustable rod lengths.

Image 4.2: Bulb compatibility for E26 base, up to 60W.

5. Opsætning (Installationsvejledning)

This fixture is 95% pre-assembled for your convenience. Only simple assembly and electrical installation are required.

Nødvendige værktøjer:

• Skruetrækker (Phillips og Flathead)
• Trådstrippere
• Elektrisk tape
• Stige
• Sikkerhedsbriller

Trin før installation:

1. Sluk for strømmen ved hovedafbryderen eller sikringsskabet. Ensure the power is completely off before proceeding.
2. Pak forsigtigt alle komponenter ud, og inspicer dem for eventuelle skader.
3. Familiarize yourself with the parts and the installation diagram provided.

Assembly and Electrical Installation:

1. Trin 1: Attach the mounting plate to the ceiling junction box using the provided screws. Ensure it is securely fastened.
2. Trin 2: Connect the fixture's wires to the house wiring. Connect the black wire from the fixture to the black wire from the ceiling (live/hot). Connect the white wire from the fixture to the white wire from the ceiling (neutral). Connect the ground wire from the fixture to the ground wire from the ceiling. Use wire nuts to secure all connections and wrap with electrical tape for added safety.
3. Trin 3: Stik forsigtigt alle ledninger ind i samledåsen.
4. Trin 4: Attach the fixture's canopy to the mounting plate, securing it with the decorative nuts.
5. Trin 5: Adjust the hanging rods to your desired height. The height can be adjusted from a minimum of 23 inches to a maximum of 46 inches.
6. Trin 6: Install the clear glass shades onto the fixture.
7. Trin 7: Screw in E26 base light bulbs (not included) into each of the five sockets. Do not exceed 60W per bulb; 40W is recommended for optimal performance and longevity.

Image 5.1: Installation steps diagram for the chandelier.

Efter installation:

Once installation is complete, restore power at the main circuit breaker. Test the light fixture to ensure proper operation.

6. Betjeningsvejledning

Your TWIG 5-Light Farmhouse Linear Chandelier is designed for straightforward operation.

• Ensure all five E26 base bulbs are securely installed in their sockets.
• Betjen lampen med din almindelige vægafbryder.
• If you wish to use a dimmer function, ensure you install dimmable E26 bulbs and have a compatible dimmer switch (not included) installed in your electrical system.

7. Pleje og vedligeholdelse

Korrekt pleje vil sikre din lysekrones lange levetid og udseende.

Rensning:

1. Always turn off the power supply to the fixture at the circuit breaker and allow it to cool completely before cleaning.
2. For metal and wood surfaces, wipe gently with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
3. Glass shades can be carefully removed and washed with mild soap and water. Rinse thoroughly and dry completely before reattaching them to the fixture.

Udskiftning af pære:

1. Turn off the power supply to the fixture at the circuit breaker.
2. Allow the bulbs to cool down completely before touching them.
3. Skru forsigtigt den gamle pære ud af fatningen.
4. Screw in a new E26 base bulb, ensuring it does not exceed the maximum recommended wattage of 60W (40W recommended).

8. Fejlfinding

If you encounter any issues with your chandelier, refer to the following common problems and solutions:

9. Garanti og kundesupport

TWIG is committed to providing quality products and customer satisfaction.

For any questions, concerns, or assistance regarding your TWIG 5-Light Farmhouse Linear Chandelier, please do not hesitate to contact our customer support team via email. We strive to respond to all inquiries within 24 hours.

Please refer to your purchase documentation or retailer for specific warranty details and terms applicable to your product.