KRUX EDIS 1000

KRUX Edis 1000 KRX0109 USB-mikrofon brugsanvisning

Model: EDIS 1000 (KRX0109)

1. Introduktion

The KRUX Edis 1000 is a USB condenser microphone kit designed for high-quality audio capture. It features a cardioid polar pattern, an adjustable arm for flexible positioning, and a pop filter to reduce plosive sounds. This manual provides detailed instructions for setting up, operating, and maintaining your microphone.

1.1 Pakkens indhold

Kontroller venligst, at alle følgende komponenter er inkluderet i din pakke:

  • KRUX Edis 1000 USB Condenser Microphone
  • Adjustable Microphone Arm (Desk Clamp Type)
  • Shock Mount
  • Popfilter
  • Skum forrude
  • USB Type-B to USB Type-A Cable
All components of the KRUX Edis 1000 microphone kit laid out, including the microphone, adjustable arm, shock mount, pop filter, foam windscreen, and USB cable.

Figure 1: All included components of the KRUX Edis 1000 microphone kit.

2. Opsætningsvejledning

2.1 Mounting the Adjustable Arm

  1. Fastgør skrivebordet clamp to a sturdy surface, such as a desk or table edge. Tighten the screw until the clamp er sikker.
  2. Insert the base of the adjustable microphone arm into the hole on the desk clamp. Tighten the locking knob on the clamp to secure the arm.
  3. Adjust the arm to your desired height and position. Ensure all joints are tightened to prevent movement during use.
The KRUX Edis 1000 microphone mounted on its adjustable arm, with the pop filter in front, ready for use.

Figure 2: KRUX Edis 1000 microphone fully assembled on its adjustable arm.

2.2 Attaching the Microphone and Pop Filter

  1. Screw the shock mount onto the threaded end of the adjustable arm.
  2. Gently place the KRUX Edis 1000 microphone into the shock mount. The microphone should be securely held by the elastic bands of the shock mount.
  3. Attach the pop filter to the adjustable arm using its clamp. Position the pop filter approximately 2-3 inches (5-7 cm) in front of the microphone.
  4. Optionally, place the foam windscreen over the microphone for additional wind and plosive noise reduction.

2.3 Tilslutning til din enhed

  1. Connect the USB Type-B end of the provided cable to the port at the bottom of the microphone.
  2. Connect the USB Type-A end of the cable to an available USB port on your computer, game console, or smartphone (an adapter may be required for some smartphones, not included).
  3. The microphone is Plug & Play compatible. Your operating system should automatically detect and install the necessary drivers.
  4. Verify the microphone is selected as the input device in your system's sound settings or your recording/streaming software.

3. Betjeningsvejledning

3.1 Grundlæggende brug

  • Placering: For optimal sound quality, speak directly into the front of the microphone (the side with the KRUX logo) at a distance of 6-12 inches (15-30 cm).
  • Gain Control: The KRUX Edis 1000 does not feature a physical gain knob. Adjust input levels through your computer's sound settings or your recording software.
  • Overvågning: Use your computer's audio output to monitor your sound. The microphone does not have a direct headphone jack.
Nærbillede view of the KRUX Edis 1000 USB microphone, showing its black metal body and mesh grille.

Figure 3: Close-up of the KRUX Edis 1000 microphone.

3.2 Optimizing Audio Quality

  • Miljø: Optag i et roligt miljø for at minimere baggrundsstøj.
  • Popfilter: Always use the pop filter to prevent harsh 'P' and 'B' sounds (plosives) from distorting your audio.
  • Shock Mount: The shock mount helps isolate the microphone from vibrations and handling noise from the desk or arm.
  • Softwareindstillinger: Utilize noise reduction, equalization, and compression features available in your recording or streaming software to further enhance sound quality.

4. Pleje og vedligeholdelse

  • Rensning: Use a soft, dry cloth to clean the microphone body and arm. Do not use liquid cleaners or solvents.
  • Opbevaring: Når mikrofonen ikke er i brug, skal den opbevares et rent og tørt sted væk fra ekstreme temperaturer og fugtighed.
  • Håndtering: Avoid dropping or subjecting the microphone to strong impacts, as this can damage internal components.
  • Kabelpleje: Bøj eller klem ikke USB-kablet for meget. Tag altid fat i stikket, ikke i kablet, når du sætter det i eller tager det ud.

5. Fejlfinding

ProblemMulig løsning
Mikrofonen blev ikke registreret af computeren.
  • Sørg for, at USB-kablet er korrekt tilsluttet til både mikrofonen og computeren.
  • Prøv en anden USB-port på din computer.
  • Genstart din computer.
  • Check your operating system's sound settings to ensure the KRUX Edis 1000 is selected as the input device.
Low or no audio output.
  • Increase the microphone input level in your computer's sound settings or recording software.
  • Ensure you are speaking into the front of the microphone.
  • Check for any mute functions enabled in your software.
Audio sounds distorted or crackling.
  • Reduce the microphone input level to prevent clipping.
  • Sørg for, at USB-kablet ikke er beskadiget.
  • Tjek for interferens fra andre elektroniske enheder.
Excessive 'P' and 'B' sounds (plosives).
  • Ensure the pop filter is correctly positioned 2-3 inches in front of the microphone.
  • Try speaking slightly off-axis from the microphone.

6. Tekniske specifikationer

FeatureSpecifikation
ModelnavnEDIS 1000
ModelnummerKRX0109
MærkeKrux
MikrofontypeKondensator
Polar mønsterEnvejs (kardioid)
ForbindelsesteknologiUSB
Connector TypeUSB Type-B
Kompatible enhederGame Console, Personal Computer, Smartphone
Audio Følsomhed130 decibel
Signal-støjforhold78 dB
Antal kanaler1
StrømkildeUSB Cable (Bus-powered)
MaterialeMetal
FarveSort
Item Weight (Microphone)215 gram
Item Dimensions (Microphone L x W x H)15 x 4.6 x 4.6 centimeter
Særlige funktionerAdjustable Arm, Plug & Play
Anbefalede anvendelserStreaming

7. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle KRUX webwebstedet eller kontakt din forhandler. Gem din købsbevis i tilfælde af garantikrav.

Fabrikant: Krux

Webwebsted: www.krux.tech (Eksample link, please verify official KRUX support webwebsted)

Relaterede dokumenter - EDIS 1000

Preview Brugervejledning til Krux EDIS 1000 USB-mikrofon
Brugervejledning til Krux EDIS 1000 USB-mikrofonen, inklusive installation, tekniske specifikationer og garantioplysninger.
Preview KRUX ARM 100 KRXH005 Mikrofonstativ - Tekniske specifikationer og monteringsvejledning
Detaljeret information om KRUX ARM 100 KRXH005 mikrofonstativet, inklusive tekniske specifikationer, monteringsvejledning og garantioplysninger. Optimeret til søgemaskiner.
Preview KRUX ARM 200L / ARM 200S Mikrofonarm - Tekniske specifikationer og monteringsvejledning
Detaljeret information om de justerbare mikrofonbom-arme til KRUX ARM 200L og ARM 200S, herunder tekniske specifikationer, monteringsvejledning og garantioplysninger.
Preview KRUX Neo Pro RGB trådløst gamingtastatur - brugermanual og funktioner
Omfattende guide til KRUX Neo Pro RGB Wireless gaming-tastaturet. Dækker specifikationer, opsætning, trådløs forbindelse, opladning, tilpasning af baggrundsbelysning, nøglefunktioner, skift af operativsystem og garantioplysninger.
Preview Krux KX0-8400 Trådløst kontorsæt - Brugervejledning og specifikationer
Officiel brugervejledning til Krux KX0-8400 Office Wireless Set med detaljerede oplysninger om tilslutninger, batterioplysninger, nøglefunktioner, garanti og musens layout. Indeholder tekniske specifikationer og brugsvejledning.
Preview KRUX PALLAS KRX0032 PC Case Installationsvejledning
Detaljeret installationsvejledning til KRUX PALLAS KRX0032 PC-kabinettet, der dækker installation af blæser, lagerplads, strømforsyning, bundkort og GPU samt tilslutninger til frontpanelet.