MAF 14 tommer fuld størrelse metalplatform sengramme instruktionsmanual

1. Sikkerhedsoplysninger

Læs og forstå venligst alle instruktioner før montering og brug. Gem denne manual til senere brug.

• Vægt kapacitet: This bed frame is designed to support a maximum weight of 3000 pounds. Do not exceed this limit.
• Skarpe kanter: Exercise caution around metal edges during assembly to prevent injury.
• Børn: Hold børn væk fra samleområdet. Små dele kan udgøre en kvælningsfare.
• Forsamling: Sørg for, at alle bolte og fastgørelseselementer er forsvarligt spændt før brug. Kontroller regelmæssigt og efterspænd efter behov.
• Anvendelse: Do not jump on the bed frame. Distribute weight evenly across the surface.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Bed Frame Sections (various pieces)
• Steel Support Slats
• Hardwarepakke (skruer, skiver, unbrakonøgle)
• Anti-Slip Mattress Baffles
• Gummi fodpuder
• Instruktionsmanual

3. Monteringsvejledning

Assembly typically takes approximately 20 minutes with one person. Two people may expedite the process.

1. Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches.
2. Saml rammesektioner: Connect the main frame sections using the provided screws and Allen wrench. Important: Do not fully tighten any screws until all frame sections are loosely assembled. This allows for proper alignment.
3. Installer støttelameller: Place the steel support slats into the designated slots on the frame. Ensure they are securely seated. The U-shaped grooves help fix the slats in place.
4. Fastgør skridsikre bafler: Install the plastic anti-slip baffles on the frame as indicated in the diagram to prevent the mattress from sliding. Ensure they are mounted outwards.
5. Attach Rubber Foot Pads: Secure the rubber foot pads to the bottom of each leg. These protect your floor and reduce noise.
6. Endelig stramning: Once all components are in place and aligned, systematically tighten all screws until they are secure. Do not overtighten.

Figure 3.1: Correct installation of mattress stoppers (mounted outwards).

Figur 3.2: Overview of bed frame features and components.

4. Betjeningsvejledning

4.1 Madrasplacering

This platform bed frame is designed to be used without a box spring. Simply place your mattress directly onto the steel support slats. The integrated anti-slip baffles will help keep your mattress in position.

Figure 4.1: Bed frame with mattress, illustrating no box spring is required.

4.2 Opbevaring under sengen

The 14-inch height of the bed frame provides 12.4 inches of clearance underneath, offering ample space for storage. Utilize this area for bins, luggage, or other items to maximize your bedroom space.

Figure 4.2: Under-bed storage space with items placed beneath the frame.

5. Vedligeholdelse

• Rensning: Tør metalrammen af ​​med reklameamp klud og mildt rengøringsmiddel. Undgå slibende rengøringsmidler, der kan beskadige overfladen.
• Fastgørelseskontrol: Periodically (e.g., every 3-6 months) inspect all screws and bolts to ensure they remain tight. Re-tighten if any looseness is detected.
• Gulvbeskyttelse: Ensure the rubber foot pads are intact and properly seated to continue protecting your flooring.

6. Fejlfinding

• Støj/Knirken: If the frame develops noise, check all connections and ensure screws are tightly fastened. Verify that the rubber foot pads are correctly installed and that the mattress is not directly rubbing against metal parts.
• Madrasglidende: Ensure the plastic anti-slip baffles are properly installed and facing outwards. If sliding persists, consider using a non-slip mattress pad between the mattress and the frame.
• Ustabilitet: If the frame feels unstable, immediately cease use and re-check all assembly steps, ensuring all components are correctly aligned and all fasteners are fully tightened.

7. Funktioner

• Kraftig stålkonstruktion: Manufactured from robust steel, capable of supporting up to 3000 pounds, ensuring durability and stability.
• Optimal Under-Bed Storage: Provides 12.4 inches of clearance, offering significant space for storing personal items and maximizing room utility.
• Sikkerhedsfokuseret design: Features rounded corners on the legs to minimize the risk of accidental bumps and injuries.
• Madrasstabilitet: Equipped with plastic anti-slip baffles and U-shaped grooves to prevent the mattress from shifting or sliding.
• Floor Protection & Noise Reduction: Includes rubber foot pads on all legs to protect flooring from scratches and reduce operational noise.
• Ingen boxmadras nødvendig: Dependable steel slats provide direct support for your mattress, eliminating the need for a box spring.
• Nem montering: Designed for straightforward assembly, typically completed by one person within 20 minutes using the included tools.

Figure 7.1: Illustration of the bed frame's 3000 lbs weight capacity.

Figure 7.2: Close-up of safety and stability features.

8. Specifikationer

Key specifications for the MAF 14 Inch Full Size Metal Platform Bed Frame.

Figure 8.1: Full size bed frame dimensions.

9. Garanti og support

This MAF bed frame comes with a 5 års eftersalgsservice, ensuring support for any manufacturing defects or issues arising from normal use.

For assistance, missing parts, or warranty claims, please contact MAF customer support through the retailer's platform or visit the official MAF website. Please have your model number (MT10-JD-AMZ01-14F) and purchase date available when contacting support.

We are committed to providing a satisfactory solution as quickly as possible.