ELEGANT Corner Shower Enclosure Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your ELEGANT Corner Shower Enclosure. Please read all instructions carefully before beginning installation to ensure proper assembly and safe use. Retain this manual for future reference.

Image 1.1: ELEGANT Corner Shower Enclosure (34x34x72, Black Framed) installed in a bathroom setting.

2. Sikkerhedsoplysninger

ADVARSEL: Installation of this product requires two or more people due to the weight and size of the glass panels. Failure to follow these safety instructions may result in personal injury or product damage.

• Bær altid sikkerhedsbriller under installationen.
• Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges or corners.
• Ensure the installation surface (walls, floor) is structurally sound and level.
• Brug passende værktøjer og hardware til installationen.
• Professionel installation anbefales for optimal sikkerhed og ydeevne.
• Do not use abrasive cleaners or tools that could scratch the glass or frame finish.

3. Pakkens indhold

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ELEGANT customer support.

• Tempered Glass Panels (2 fixed, 2 sliding doors)
• Aluminum Wall Profiles
• Top and Bottom Guide Rails
• Sliding Door Rollers (Top and Bottom)
• Dørhåndtag
• Waterproof Seal Strips
• Mounting Hardware (Screws, anchors, gaskets)

Image 3.1: Illustration showing glass and frame components pre-installed in packaging for easier assembly.

4. Specifikationer

5. Opsætning og installation

Before starting, ensure you have all necessary tools (e.g., drill, level, measuring tape, screwdriver, caulk gun, silicone sealant) and that your shower base or curb is properly installed and level.

5.1. Kontrol før installation

• Unpack all components and inspect for damage.
• Confirm wall studs or blocking are present in the installation area for secure mounting.
• Measure the shower opening to ensure it matches the enclosure dimensions.

5.2. Vægprofffile Installation

1. Position the aluminum wall profiles against the finished walls at the desired height. Use a level to ensure they are perfectly vertical.
2. Mark the drilling points through the pre-drilled holes in the profiles.
3. Bor huller og isæt vægankre (hvis nødvendigt).
4. Fastgør wall profiles to the walls using the provided screws. The design allows for up to 20mm (approximately 0.78 inches) of adjustment on each side for out-of-plumb walls.

Image 5.2.1: Detail showing the 20mm adjustment capability of the wall profiles for accommodating uneven walls.

5.3. Fixed Glass Panel Installation

1. Carefully insert the fixed glass panels into the installed wall profiles and the bottom guide rail.
2. Ensure the glass is seated firmly and evenly.
3. Secure the fixed panels using the appropriate fasteners as indicated in the detailed diagram.

5.4. Skydedørsmontering

1. Attach the rollers to the top and bottom of the sliding glass doors. Ensure rollers are securely fastened and move freely.
2. Install the door handles onto the sliding glass panels.

Image 5.4.1: Step 1 of roller installation, showing attachment to the glass panel.

Image 5.4.2: Step 2 of roller installation, showing the roller secured to the glass.

5.5. Sliding Door Installation

1. Carefully lift and place the assembled sliding doors onto the top and bottom guide rails. Ensure the rollers engage smoothly with the tracks.
2. Test the sliding motion of both doors to ensure they operate freely and meet correctly in the corner.

Image 5.5.1: Detail of the bottom guide rail, illustrating how the sliding door rollers engage with the track.

5.6. Waterproof Seal Installation

1. Install the provided waterproof seal strips along the edges of the glass panels and where the doors meet. These seals are designed to prevent water leakage.
2. Apply a continuous bead of silicone sealant along the exterior base of the enclosure where it meets the shower base or curb, and along the exterior vertical joints where the wall profiles meet the walls.
3. Allow the sealant to cure completely (typically 24-48 hours) before using the shower.

Billede 5.6.1: Nærbillede view of the black waterproof seal strips designed to prevent water leakage.

6. Betjeningsvejledning

The ELEGANT Corner Shower Enclosure features double sliding doors for convenient access. To open, gently slide either door along its track. To close, slide the doors until they meet in the corner, where they will be held in place by magnetic seals.

• Avoid forcing the doors if they encounter resistance. Inspect the tracks for obstructions.
• Do not hang heavy objects from the door handles or frame.

7. Vedligeholdelse

Regular cleaning and maintenance will ensure the longevity and appearance of your shower enclosure.

• Rengøring af glas: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid cleaners containing harsh chemicals, abrasives, or scouring pads, as these can damage the glass or protective coatings.
• Rengøring af ramme: Tør aluminiumspro affiles med en blød, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner.
• Forseglingsinspektion: Periodically check the waterproof seal strips for wear or damage. Replace if necessary to prevent leaks.
• Vedligeholdelse af ruller og bælter: Keep the top and bottom tracks free of soap scum, hair, and debris to ensure smooth door operation. Clean rollers with a small brush if needed.

8. Fejlfinding

9. Garanti og kundesupport

ELEGANT products are manufactured to high-quality standards. For warranty information or assistance with parts, installation, or troubleshooting, please contact ELEGANT customer support. Our service representatives are available to assist you with any questions.

Please have your model number (BL-343472GD) and purchase date available when contacting support.