Brugsanvisning til Bravilor Bonamat HWA 14 varmtvandsdispenser

1. Introduktion

Thank you for choosing the Bravilor Bonamat HWA 14 Hot Water Dispenser. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and keep it for future reference.

2. Sikkerhedsinstruktioner

For at sikre sikker drift og forhindre skader på apparatet eller personskade på brugeren, bedes du overholde følgende sikkerhedsforanstaltninger:

• Elektrisk sikkerhed: Always connect the dispenser to a grounded power outlet. Do not operate with a damaged power cord or plug. Keep the power cord away from hot surfaces.
• Hot Surfaces and Water: The dispenser produces hot water and surfaces may become hot during operation. Exercise extreme caution to avoid burns. Do not touch hot surfaces directly.
• Vandstand: Never operate the dispenser without sufficient water in the tank. This can cause damage to the heating element.
• Rensning: Disconnect the power supply before cleaning. Do not immerse the appliance in water or other liquids. Use only recommended cleaning agents.
• Børn og opsyn: Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed. Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
• Reparationer: Do not attempt to repair the appliance yourself. All repairs should be performed by qualified service personnel.

3. Produktet er slutview

The Bravilor Bonamat HWA 14 is a robust and efficient hot water dispenser designed for various applications. Familiarize yourself with its main components:

3.1 Komponenter

• Hovedenhed (kabinet)
• Water Tank (internal, 13.1 L capacity)
• Dispenserhane
• Drypbakke
• Power Switch / Indicator Lights
• Strømledning

3.2 Produkt Views

Figur 1: Front view of the Bravilor Bonamat HWA 14, showing the main body, dispensing tap, and drip tray.

Figur 2: Vinklet view of the dispenser, highlighting its compact design and side panel.

Figur 3: Side view of the dispenser, illustrating its depth and overall dimensions.

4. Opsætning

4.1 Udpakning

1. Tag forsigtigt dispenseren ud af emballagen.
2. Fjern alt emballagemateriale, inklusive beskyttelsesfilm eller -tape.
3. Inspect the appliance for any signs of damage. If damaged, do not use and contact your supplier.

4.2 Placering

• Place the dispenser on a stable, level, and heat-resistant surface.
• Ensure adequate ventilation around the unit. Do not place it directly against a wall or in an enclosed cabinet.
• Keep the dispenser away from direct sunlight, heat sources, and areas with high humidity.
• Sørg for, at stikkontakten er let tilgængelig.

4.3 Indledende rengøring

1. Before first use, clean the water tank and dispensing tap.
2. Fill the tank with clean water and dispense a few liters to flush the system. Discard this water.
3. Tør det udvendige af med adamp klæde.

5. Betjeningsvejledning

5.1 Påfyldning af vandtanken

1. Ensure the dispenser is unplugged or powered off.
2. Åbn låget på vandbeholderen.
3. Fill the tank with fresh, cold drinking water up to the maximum fill line. Do not overfill.
4. Luk låget forsvarligt.

5.2 Tænd

1. Sæt netledningen i en jordet stikkontakt.
2. Turn on the main power switch, usually located on the back or side of the unit.
3. The indicator light will illuminate, signaling that the heating process has begun. The water will heat to the optimal temperature. This may take several minutes depending on the initial water temperature and tank capacity.

5.3 Udlevering af varmt vand

1. Once the water has reached the desired temperature (indicated by a change in the indicator light or a ready signal), place a cup or container under the dispensing tap.
2. Press or pull the dispensing lever/button to release hot water.
3. Release the lever/button to stop the flow.
4. Forsigtighed: Hot steam may be released during dispensing.

5.4 Sluk

• When not in use for extended periods, turn off the main power switch.
• Tag stikket til dispenseren ud af stikkontakten.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your hot water dispenser.

6.1 Daglig rengøring

• Tøm og rengør drypbakken regelmæssigt.
• Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Clean the dispensing tap with a soft brush or cloth to remove any residue.

6.2 Afkalkning

Depending on water hardness, limescale can build up inside the tank and heating elements. Descale the unit regularly (e.g., every 1-3 months) using a suitable descaling agent for hot water appliances. Follow the descaling agent's instructions carefully.

1. Ensure the dispenser is unplugged and cooled down.
2. Prepare the descaling solution according to the product instructions.
3. Hæld opløsningen i vandtanken.
4. Allow it to sit for the recommended time.
5. Hæld opløsningen helt fra.
6. Rinse the tank thoroughly by filling and draining with fresh water several times to remove all descaling residue.

6.3 Opbevaring

If storing the dispenser for an extended period, ensure it is clean, dry, and empty of water. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Fejlfinding

Se tabellen nedenfor for almindelige problemer og løsninger. Kontakt kundesupport, hvis problemet fortsætter.

8. Specifikationer

9. Garanti og support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your local Bravilor Bonamat distributor. Keep your proof of purchase for any warranty claims.

For further assistance, visit the official Bravilor Bonamat webwebsted eller kontakt deres kundeserviceafdeling.