DieseRC 433Mhz Wireless Remote Control Switch

1. Introduktion

The DieseRC 433Mhz Wireless Remote Control Switch is a versatile and reliable system designed for remote operation of various electrical appliances and equipment. Featuring a 30A relay receiver and three transmitters, it provides stable performance and high reception sensitivity, allowing signals to pass through walls, floors, and doors. This system is ideal for use in homes, farms, factories, offices, and other environments where convenient remote control is desired for devices such as lights, water pumps, fans, and more.

Image: The DieseRC 433Mhz Wireless Remote Control Switch system, including the receiver unit and three remote control transmitters.

2. Produktfunktioner

• Great Design: Operates on 433Mhz RF frequency with stable and reliable performance. High reception sensitivity (> -105dBm) allows strong signals to pass through walls, floors, and doors. Offers a control distance of up to 50 meters without obstacles. Features an extendable antenna for improved signal reception.
• Nem at bruge: Simple setup and reset procedures. Supports three operating modes: Momentary, Toggle, and Latched. The product is pre-set to Latched mode, with dedicated 'ON' and 'OFF' buttons for straightforward operation.
• More Flexibility: The receiver incorporates a robust 30A relay, capable of handling high-power electrical appliances for long-term stable control. Each receiver can store programming for up to 20 transmitters. A single transmitter can also control multiple receivers, provided they are properly paired.
• Kvalitetssikring: Equipped with a high-quality relay designed for over 100,000 uses, ensuring durability and stability. The high-power terminal can withstand a current of 30A, maintaining performance even with unstable current. The receiver is compatible with a wide voltage område på 85V~250V.
• Bred anvendelse: Suitable for diverse applications including homes, farms, factories, offices, laboratories, and supermarkets. Can remotely operate various devices such as lights, water pumps, wireless security alarms, fans, lamps, ventilation devices, monitors, printers, and fountains.

3. Pakkens indhold

• 1 x DieseRC 433Mhz Wireless Remote Control Relay Receiver (Model: 2201H)
• 3 x DieseRC Wireless Transmitters (Remote Controls)
• 1 x CR2032 Battery (pre-installed in each transmitter)

4. Specifikationer

Billede: Detaljeret view of the receiver unit, showing input/output terminals, learning button, and indicator light. Also shows the remote control with ON/OFF buttons and metal keychain.

5. Opsætning

5.1 Tilslutning af modtageren

Ensure all power is disconnected before wiring. Connect the AC input (Line and Neutral) to the receiver's input terminals. Connect your appliance's power supply (Line and Neutral) to the receiver's output terminals. The receiver acts as a switch in the circuit.

Image: A wiring diagram illustrating how to connect the AC 85V~250V power source to the receiver's input and how to connect a light fixture to the receiver's output.

Image: An 'Easy Connect' diagram showing simplified wiring for different appliances like lights, fans, water pumps, and coffee makers, demonstrating the versatility of the receiver.

5.2 Pairing (Programming) the Transmitters

The receiver supports multiple operating modes. Follow the steps below to program your transmitters to the desired mode. The receiver has a 'Learning Button' for programming.

5.2.1 Momentary Mode (Mode 1)

1. Press the learning button on the receiver 1 gang. Indikatorlyset vil tænde.
2. Press the desired button on your transmitter (e.g., 'ON' button). The indicator light on the receiver will flash, indicating successful pairing.

Functionality: The relay remains active only while the transmitter button is pressed and held. Releasing knappen deaktiverer relæet.

5.2.2 Toggle Mode (Mode 2)

1. Press the learning button on the receiver 2 gange. Indikatorlyset vil tænde.
2. Press the desired button on your transmitter (e.g., 'ON' button). The indicator light on the receiver will flash, indicating successful pairing.

Functionality: Press the transmitter button once to activate the relay. Press the same button again to deactivate the relay.

5.2.3 Latched Mode (Mode 3) - Default Setting

1. Press the learning button on the receiver 3 gange. Indikatorlyset vil tænde.
2. Press the 'ON' button on your transmitter. The indicator light on the receiver will flash.
3. Press the 'OFF' button on your transmitter. The indicator light on the receiver will flash again, indicating successful pairing.

Functionality: Press the 'ON' button to activate the relay. Press the 'OFF' button to deactivate the relay.

5.2.4 Delay Mode (Modes 4, 5, 6, 7)

This mode activates the relay for a specific duration after the button is pressed.

• Tryk på læringsknappen 4 gange for a 5-second delay.
• Tryk på læringsknappen 5 gange for a 10-second delay.
• Tryk på læringsknappen 6 gange for a 15-second delay.
• Tryk på læringsknappen 7 gange for a 20-second delay.

After pressing the learning button the specified number of times, the indicator light will turn on. Then, press the desired button on your transmitter. The indicator light on the receiver will flash, indicating successful pairing.

Functionality: The relay activates when the transmitter button is pressed and automatically deactivates after the set delay time.

Image: Visual instructions for programming the remote control in Latched Mode (press learning button 3 times, then ON, then OFF) and for resetting the receiver (press learning button 8 times).

5.3 Resetting the Receiver

To clear all programmed transmitters from the receiver:

1. Press the learning button on the receiver 8 gange. The indicator light will flash rapidly and then turn off.

All previously paired transmitters will be cleared, and the receiver will be ready for new programming.

6. Betjening af enheden

Once the transmitters are successfully paired with the receiver in your desired mode, you can begin operating your connected appliances remotely.

• Latched Mode (Default): Use the 'ON' button on the transmitter to turn the connected device ON, and the 'OFF' button to turn it OFF.
• Skift tilstand: Press the programmed button once to turn the device ON, and press the same button again to turn it OFF.
• Momentan Mode: Press and hold the programmed button to keep the device ON. Release the button to turn the device OFF.
• Forsinkelsestilstand: Press the programmed button to turn the device ON. The device will automatically turn OFF after the pre-set delay time (5, 10, 15, or 20 seconds).

Image: Illustrates the application of the remote control system for managing lights in a living room and a water pump near a swimming pool, highlighting its convenience for various household and outdoor uses.

7. Fejlfinding

• Enheden reagerer ikke:
  • Check power connections to the receiver and the appliance.
  • Ensure the transmitter battery (CR2032) is functional and correctly inserted.
  • Verify that the transmitter is properly paired with the receiver in the desired operating mode. If unsure, try resetting the receiver and re-pairing.
  • Check if the receiver's indicator light responds when a transmitter button is pressed.
• Limited remote control range:
  • Sørg for, at modtagerens antenne er helt udstrakt og ikke blokeret.
  • Minimize physical obstructions (thick walls, metal objects) between the transmitter and receiver.
  • Undgå kilder til stærk elektromagnetisk interferens.
• Receiver indicator light not working:
  • Check the power supply to the receiver.
  • Sørg for, at ledningsføringen er korrekt og sikker.

8. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the receiver and transmitters. Do not use abrasive cleaners or solvents.
• Miljø: Keep the devices in a dry environment, away from excessive moisture, dust, and extreme temperatures.
• Udskiftning af batteri: If the remote control's range decreases or it stops responding, replace the CR2032 battery in the transmitter. To replace, open the battery compartment on the back of the transmitter and insert a new battery with the correct polarity.
• Ledningsinspektion: Periodically inspect the wiring connections to the receiver to ensure they remain secure and free from corrosion.

9. Garanti og support

DieseRC is committed to providing high-quality products and excellent customer service. While specific warranty periods may vary by region or retailer, DieseRC aims to provide perfect after-sales service and will do its best to resolve any customer issues related to the product.

For technical support, troubleshooting assistance, or any inquiries regarding your DieseRC 433Mhz Wireless Remote Control Switch, please contact DieseRC customer support through the platform where you purchased the product or visit the official DieseRC store for contact information.

Thank you for choosing DieseRC products.