Indledning
This manual provides detailed instructions for the safe and efficient use of your OHLUX MF18228 LED Floor Lamp. This modern torchiere lamp features 36W/3000LM brightness, 5 adjustable color temperatures, and convenient remote and touch controls. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Sikkerhedsinstruktioner
- Sørg for, at strømforsyningen voltage matcher lamp's requirements (110V).
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Forsøg ikke at adskille eller modificere lamp. Der er ingen dele indeni, der kan repareres af brugeren.
- Behold lamp væk fra varmekilder og direkte sollys.
- Tag altid stikket ud af lamp fra stikkontakten før rengøring eller vedligeholdelse.
- Sørg for at lamp is placed on a stable, level surface to prevent tipping. The weighted base is designed for stability.
- Keep the remote control and its batteries out of reach of children.
Pakkens indhold
Kontroller, at alle komponenter er til stede før montering:
- LED Lamp Hoved
- Lamp Pole Sections (typically 3-4 sections)
- Vægtet base
- Strømadapter/ledning
- Fjernbetjening (AAA-batterier medfølger ikke)
- Brugermanual
Opsætning og montering
Follow these steps to assemble your OHLUX Floor Lamp:
- Fastgør basen: Carefully screw the lowest pole section into the weighted base until secure.
- Saml stangen: Connect the remaining pole sections by screwing them clockwise. Ensure each section is tightly fastened to prevent wobbling.
- Fastgør Lamp Hoved: Skru lamp head onto the top pole section. Ensure the power cord passes freely through the pole.
- Tilslut strøm: Sæt netledningen i en standard 110V AC stikkontakt.
- Installer fjernbetjeningsbatterier: Open the battery compartment on the back of the remote control and insert two AAA batteries (not included), observing polarity.
Betjeningsvejledning
Your OHLUX Floor Lamp can be controlled via the included remote control or the touch buttons located on the lamp pol.
Fjernbetjeningsfunktioner
- Power knap: Drejer l'enamp Til eller fra.
- Color Temperature Buttons (CCT+ / CCT-): Adjusts the color temperature steplessly from 2700K (warm white) to 6500K (cool white).
- Brightness Buttons (+ / -): Adjusts the brightness steplessly from 10% to 100%.
- Natlys knap: Activates a preset low brightness, warm color temperature mode suitable for sleeping environments.
- Magnetisk fastgørelse: The remote can be conveniently attached to the lamp pole or any metal surface.
Tryk på kontrolfunktioner
- On/Off/Short Press: A short press cycles through 4 preset color temperatures (e.g., 2700K, 4000K, 5000K, 6500K).
- Long Touch (Color Temperature): Press and hold to steplessly adjust the color temperature from 2700K to 6500K.
- Short Touch (Brightness): A short press cycles through 4 preset brightness levels (e.g., 25%, 50%, 75%, 100%).
- Long Touch (Brightness): Press and hold to steplessly adjust the brightness from 10% to 100%.
Hukommelsesfunktion
Lamp features a memory function that remembers your last brightness and color temperature settings. These settings are retained even after the lamp is turned off via the wall switch or in case of a power outage, saving you from frequent adjustments.
Natlys -tilstand
Activate the dedicated night light mode via the remote control for a soft, low-intensity light, ideal for nighttime use without disturbing sleep.
Opretholdelse
- Rensning: Sørg for at lamp er taget ud af stikkontakten før rengøring. Brug en blød, tør klud til at tørre l'en afampoverflade. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige finishen.
- LED lyskilde: The LED light source is integrated and not user-replaceable. Do not attempt to replace the LEDs.
- Fjernbetjening: Replace AAA batteries in the remote control when its range decreases or it becomes unresponsive.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp tændes ikke. | No power, loose connection, remote batteries dead. | Check if the power cord is securely plugged in. Ensure the wall outlet is functional. Replace remote control batteries. |
| Fjernbetjeningen reagerer ikke. | Dead batteries, remote too far, interference. | Replace remote batteries. Ensure you are within the 50ft (15m) range. Remove any obstructions between the remote and the lamp. |
| Lamp flimrer eller dæmpes uventet. | Unstable power supply, internal issue. | Prøv at tilslutte lamp into a different outlet. If the problem persists, contact customer support. |
| Cannot adjust brightness or color temperature. | Remote issue, touch control issue. | Ensure remote batteries are fresh. Try using the touch controls on the lamp pole. If both fail, contact customer support. |
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | MF18228 |
| Mærke | OHLUX |
| Strømkilde | Elektrisk med ledning |
| Voltage | 110 volt |
| Wattage | 36 watt |
| Lysstyrke | 3000 lumen |
| Farvetemperatur | 2700K - 6500K (Stepless Adjustable) |
| Color Rendering Index (CRI) | 85.00 |
| Kontrolmetode | Fjernbetjening, berør |
| Produktdimensioner | 24.9 cm D x 24.9 cm B x 175.3 cm H (9.8 cm D x 9.8 cm B x 69 cm H) |
| Varens vægt | 7.7 pund (3.5 kilo) |
| Materiale | Powdered Metal Steel |
| Finish Type | Pulverlakeret |
| Lamp Type | LED |
| Indendørs/Udendørs brug | Indendørs |
| Særlige funktioner | Extended Cord, Improved Cooling System, Smooth Bright Dimmable, Smooth Color Temperature Dimmable, Super Bright |
Garantioplysninger
Specific warranty details for the OHLUX MF18228 Floor Lamp are not provided in the product description. For information regarding warranty coverage and terms, please contact OHLUX customer support directly.
Kundesupport
For technical assistance, service inquiries, or any questions regarding your OHLUX Floor Lamp, please contact OHLUX customer support. The manufacturer aims to reply within 24 hours to ensure customer satisfaction.
Please refer to the official OHLUX website or your purchase documentation for the most current contact methods.
