Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 system. Please read this manual thoroughly before attempting to install or operate the unit to ensure safe and efficient use.

The Solaxx CLGE40 is designed to provide efficient water treatment for pools up to 40,000 gallons, integrating multiple functions into a single, compact unit.

2. Sikkerhedsoplysninger

Always observe the following safety precautions to reduce the risk of injury, electric shock, fire, or damage to the unit.

• Elektrisk sikkerhed: Ensure the unit is connected to a properly grounded outlet. Do not operate with damaged cords or plugs. Disconnect power before servicing.
• Kemikaliehåndtering: Follow all manufacturer's instructions for handling pool chemicals. Avoid direct contact with skin and eyes.
• Installation: Installationen skal udføres af en kvalificeret fagmand i overensstemmelse med alle lokale og nationale el- og VVS-forskrifter.
• Vandkvalitet: Maintain proper water chemistry as specified in this manual to ensure optimal performance and longevity of the unit.
• Børn og kæledyr: Hold børn og kæledyr væk fra enheden under drift og vedligeholdelse.

3. Produktet er slutview

Figur 3.1: Forside view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit. This image displays the main body of the unit, including the control panel with various indicators and buttons, and the transparent cell housing below.

Figur 3.2: Vinklet view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit. This perspective provides a clearer view of the transparent cell, which allows for visual inspection, and the plumbing connection points on either side.

The CLGE40 system integrates a salt chlorine generator with advanced control features. Key components include the control unit, the electrolytic cell, and various sensors for optimal performance.

4. Opsætning og installation

4.1 Tjekliste før installation

• Kontroller, at alle komponenter er til stede og ubeskadigede.
• Ensure adequate space for installation and maintenance.
• Confirm power supply meets unit requirements (refer to specifications).
• Have necessary plumbing tools and materials ready.

4.2 VVS-installation

1. Select an appropriate location in the return line after the filter and heater.
2. Cut the existing PVC pipe and install the provided unions.
3. Securely attach the electrolytic cell to the unions, ensuring proper flow direction as indicated on the cell.
4. Apply PVC cement to all connections for a watertight seal. Allow adequate curing time.

4.3 Elektrisk tilslutning

1. Sørg for, at strømmen er afbrudt ved afbryderen.
2. Connect the control unit to a dedicated, grounded electrical outlet or circuit as per local electrical codes.
3. Connect the cell cable to the control unit.
4. Do not restore power until all connections are secure and the system is filled with water.

5. Betjeningsvejledning

5.1 Første opstart

1. Ensure pool water chemistry is balanced (pH, alkalinity, calcium hardness).
2. Add pool salt to achieve the recommended salinity level (typically 3000-3500 ppm). Allow salt to dissolve completely.
3. Tænd for poolpumpen.
4. Restore power to the Solaxx CLGE40 unit.
5. Press the "ON/OFF" button to activate the unit.

5.2 Adjusting Chlorine Output

The unit features an adjustable output level to control chlorine production. Use the "+" and "-" buttons on the control panel to increase or decrease the output percentage. Monitor your pool's free chlorine level and adjust as needed to maintain desired sanitation.

5.3 Indikatorlys

• TIL/FRA: Indikerer strømstatus.
• PRODUKTION: Bar graph showing current chlorine production level.
• LAVT SALTINDHOLD: Illuminates when salt level is below optimal. Add salt.
• INTET FLOW: Indicates insufficient water flow through the cell. Check pump and plumbing.
• KOLDT VAND: Illuminates if water temperature is too low for efficient operation.
• CLEAN CELL: Indicates the cell requires cleaning.
• CELL LIFE LOW: Indicates the electrolytic cell is nearing the end of its lifespan and may need replacement soon.

6. Vedligeholdelse

6.1 Cellerengøring

The electrolytic cell may accumulate scale deposits over time, reducing efficiency. The "CLEAN CELL" indicator will illuminate when cleaning is required.

1. Turn off the unit and pool pump, and disconnect power.
2. Remove the electrolytic cell from the plumbing.
3. Prepare a cleaning solution of 1 part muriatic acid to 4 parts water in a plastic container. Always add acid to water, never water to acid.
4. Submerge the cell plates in the solution, ensuring the electrical connections remain dry.
5. Allow to soak until bubbling stops (typically 5-15 minutes). Do not over-soak.
6. Rinse the cell thoroughly with fresh water.
7. Reinstall the cell and restore power.

6.2 Vinterisering

In areas subject to freezing temperatures, the unit must be properly winterized to prevent damage.

• Afbryd strømmen til enheden.
• Drain all water from the electrolytic cell and plumbing lines connected to the unit.
• Remove the cell and store it in a dry, temperature-controlled environment.

7. Fejlfinding

8. Specifikationer

• Model: CLGE40 Resilience E Series
• Maximum Pool Size: 40,000 gallons
• Fabrikant: Solaxx
• Pakkedimensioner: 12 x 12 x 8 tommer
• ASIN: B0B96WPR34
• Recommended Salt Level: 3000-3500 ppm

Bemærk: Specifikationerne kan ændres uden varsel.

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official Solaxx webwebsted. Gem din købsbevis til garantikrav.

For technical support, troubleshooting assistance, or to order replacement parts, please contact Solaxx Customer Service:

• Webwebsted: www.solaxx.com

When contacting support, please have your product model number (CLGE40) and serial number ready.