PPURLOVE Twin Size L-Shape Floor Bed Instruction Manual

Indledning

Thank you for choosing the P PURLOVE Twin Size L-Shape Floor Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Vigtige sikkerhedsoplysninger

• Voksensamling påkrævet: Dette produkt skal samles af voksne.
• Hold små dele væk fra børn: Small parts can pose a choking hazard.
• Regelmæssig kontrol: Periodically check all connectors and fasteners to ensure they are tight and secure.
• Vægt kapacitet: Do not exceed the recommended weight capacity of 250 lbs per bed.
• Proper Mattress Use: Use only mattresses of the specified size (Twin size) and recommended thickness (8 inches).
• Undgå klatring: Children should not climb on the bed frame structure, as it is not designed for climbing.
• Placering: Sørg for, at sengen er placeret på en flad, stabil overflade.

Pakkens indhold

Før montering skal du kontrollere, at alle nedenstående komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Bed Frame Components (various wood panels, rails, and posts)
• Slats (for mattress support)
• Hardwarepakke (skruer, bolte, møtrikker, unbrakonøgle)
• Samlingsvejledning (denne manual)

Note: This product is delivered in two packages, which may arrive at different times. Please be patient if they do not arrive simultaneously.

Monteringsvejledning

Follow these steps carefully to assemble your P PURLOVE L-Shape Floor Bed. It is recommended to have two adults for assembly.

Trin 1: Udpak og identificer delene

Carefully unpack all components and lay them out on a soft, clean surface to prevent scratches. Identify each part using the provided parts list (not included in this text, but would be in a physical manual).

Billedbeskrivelse: En eksploderede view of the bed frame components, showing various wooden pieces, including side rails, headboards, footboards, and roof sections, laid out for assembly.

Step 2: Assemble the Main Bed Frames

Connect the side rails to the headboards and footboards for both twin bed sections using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.

Billedbeskrivelse: Two separate twin bed frames, one with a full fence and the other with partial rails, are shown partially assembled, ready to be joined.

Step 3: Connect the L-Shape Configuration

Join the two assembled twin bed frames to form the L-shape. Secure the connecting points with the designated hardware. The decorative panel with the window should be positioned at the corner where the two beds meet.

Billedbeskrivelse: Et nærbillede view of the decorative panel featuring a small window, which forms part of the house-shaped structure at the corner of the L-shaped bed.

Step 4: Install the Roof Structure

Attach the roof beams and supports to the top of the bed frame, creating the house-like appearance. Ensure all roof components are aligned and securely fastened.

Trin 5: Installer sengelameller

Place the wooden slats across the bed frame supports for both twin beds. Secure each slat according to the instructions to provide a stable foundation for the mattress. Once all slats are in place, fully tighten all previously loosened fasteners on the entire bed frame.

Billedbeskrivelse: Et nærbillede view showing the wooden slats laid across the bed frame, providing support for the mattress. The slats are evenly spaced and secured within the frame.

Trin 6: Endelig kontrol

Review all connections to ensure they are tight and the bed frame is stable. Place your twin mattresses on the slats. The bed is now ready for use.

Billedbeskrivelse: A fully assembled P PURLOVE Twin Size L-Shape Floor Bed in gray, featuring a house-shaped roof structure and fence rails, with mattresses and bedding in place, set in a child's room.

Betjeningsvejledning

The P PURLOVE L-Shape Floor Bed is designed for sleeping and imaginative play. To ensure proper use:

• Madrasplacering: Place two standard twin-size mattresses directly onto the wooden slats. No box spring is required.
• Vægtfordeling: Distribute weight evenly across the bed surface.
• Legeområde: The house-shaped design encourages imaginative play. Ensure children play safely and do not attempt to climb the roof structure.

Pleje og vedligeholdelse

• Rensning: Tør sengerammen af ​​med en blød, tør kludamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige overfladen.
• Støvning: Regularly dust the frame to prevent buildup.
• Hardwarekontrol: Periodically (e.g., every 3-6 months) check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
• Undgå overdreven fugt: Do not expose the bed to excessive moisture or humidity, as this can damage the wood.

Fejlfinding

Specifikationer

• Mærke: PPURLove
• Model: L-Shape Floor Bed (ASIN: B0B8VRYNQP)
• Størrelse: Twin Size with Double Bed
• Produktdimensioner: 118.1 cm L x 76.6 cm B x 75.1 cm H
• Farve: Grå
• Udfør type: Træ
• Inkluderede komponenter: Lameller
• Kompatibel madrasstørrelse: Tvilling
• Vægt kapacitet: 250 pund pr. seng
• Anbefalet madrastykkelse: 8 tommer
• Materiale: Solid Wood and MDF Board

Billedbeskrivelse: A technical diagram illustrating the precise dimensions of the P PURLOVE L-Shape Floor Bed, including length, width, and height measurements for all sections and components.

Produkt overview Video

Se denne video for et visuelt overblikview of the P PURLOVE L-Shape Twin House Bed with Fence.

Garanti og support

For warranty information, missing parts, or any questions regarding your P PURLOVE L-Shape Floor Bed, please contact the retailer or manufacturer directly. Please have your purchase receipt and model number (B0B8VRYNQP) available when contacting support.

You can visit the official P PURLOVE store for more information: PPURLOVE Store