Brugermanual til BH SENS DT41 TPMS-værktøj og IntelliSense UVS7051-sensorpakke

1. Introduktion

This manual provides essential instructions for the proper use and maintenance of your BH SENS DT41 TPMS Programming/Diagnostic Tool and IntelliSense UVS7051 Dual-Band TPMS Sensors. This bundle is designed to activate, read, and program Tire Pressure Monitoring System (TPMS) sensors for a wide range of passenger vehicles. Please read this manual thoroughly before operating the device to ensure safe and effective use.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og køretøjet:

• Læs alle instruktioner omhyggeligt før brug.
• This tool is intended for use by qualified automotive technicians.
• Brug ikke værktøjet i våde omgivelser eller i nærheden af ​​brandfarlige væsker eller gasser.
• Brug kun den medfølgende strømadapter og kabler.
• Ensure the vehicle's ignition is off when connecting or disconnecting the OBD2 cable, unless otherwise instructed by the vehicle's service manual.
• Keep the tool and sensors away from children.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x BH SENS DT41 TPMS Programming/Diagnostic Tool
• 20 x IntelliSense UVS7051 Dual-Band (315/433 MHz) TPMS Sensors with rubber valves
• 1 x Power Adapter with interchangeable international plugs
• 1 x OBD2 Diagnostic Cable (optional module, included in this bundle)

This image displays the BH SENS DT41 TPMS programming and diagnostic tool alongside eight IntelliSense dual-band (315/433 MHz) TPMS sensors. The DT41 tool features an intuitive icon-based interface with navigation buttons and an 'OK' button for selection. The sensors are shown with their valve stems, ready for installation.

This image illustrates the BH SENS DT41 TPMS tool bundled with essential accessories. It includes the DT41 tool, one IntelliSense dual-band sensor, a power adapter with interchangeable international plugs (EU, UK, US types), and an OBD2 cable for vehicle communication and relearn procedures.

This image shows a bulk package containing 20 IntelliSense UVS7051 dual-band (315/433 MHz) TPMS sensors. Each sensor is individually packaged, with one sensor visible outside its box, highlighting its design and the included rubber valve. The packaging indicates 'Sensor programming required' and 'Made in Germany'.

4. Opsætning

4.1 Charging the DT41 Tool

1. Connect the provided power adapter to the DT41 tool's charging port.
2. Sæt strømadapteren i en passende stikkontakt.
3. Allow the tool to charge fully before first use. The charging indicator on the screen will show the battery status.

4.2 Initial Power-On and Software Updates

1. Press and hold the power button to turn on the DT41 tool.
2. Følg instruktionerne på skærmen for den første opsætning, inklusive valg af sprog.
3. It is recommended to update the tool's database and software regularly. Connect the DT41 tool to a computer via USB and use the manufacturer's PC desktop software for updates. This ensures compatibility with the latest vehicle models and sensor types.

4.3 Sensor Preparation

IntelliSense UVS7051 sensors are universal and require configuration to a specific vehicle application using the DT41 tool before installation. Do not install unprogrammed sensors into tires.

5. Betjeningsvejledning

5.1 DT41 Tool Functions

The DT41 tool features an icon-based interface for easy navigation.

5.1.1 Activating and Reading TPMS Sensors

1. From the main menu, select the 'Check Sensor' or 'Activate Sensor' option.
2. Select the vehicle's make, model, and year using the on-screen prompts.
3. Hold the DT41 tool near the tire valve stem of the sensor you wish to activate/read.
4. Press the 'OK' button to initiate the scan.
5. The tool will display sensor data including ID, tire pressure, tire temperature, and battery status within seconds.

5.1.2 Programming IntelliSense UVS7051 Sensors

1. From the main menu, select the 'Program Sensor' option.
2. Select the vehicle's make, model, and year.
3. Choose the desired programming method (e.g., 'Copy by ID', 'Create new ID').
4. Follow the on-screen instructions to program the IntelliSense UVS7051 sensor. This process typically takes approximately 3 seconds per sensor.

5.1.3 Procedurer for genindlæring af TPMS

The DT41 tool provides information on various relearn procedures:

• Indirect Relearn: Instructions for vehicles that use the ABS system to detect tire pressure changes.
• Manuel genindlæring: Step-by-step guide for vehicles requiring specific actions (e.g., inflating/deflating tires, driving cycles).
• Automatisk genindlæring: Information for vehicles that automatically learn new sensor IDs after a drive cycle.
• OBD2 Relearn: For vehicles that require sensor IDs to be written directly to the vehicle's ECU via the OBD2 port. Connect the optional OBD2 module and cable to the vehicle's OBD2 port and follow the tool's instructions.

5.1.4 Remote Keyless Entry (RKE) Signal Check

The DT41 tool can check the signal strength and functionality of a vehicle's remote keyless entry system. Select the RKE check option and follow the prompts.

5.2 IntelliSense UVS7051 Sensor Features

• Dual-Band Compatibility: Operates on both 315 MHz and 433 MHz frequencies, covering a broad range of vehicles.
• OE-kvalitet: Designed to function comparably to original equipment sensors.
• Hurtig konfiguration: Can be configured to a specific application in approximately 3 seconds using a compatible TPMS tool like the DT41.
• Updateable: Sensors can be updated with new applications via a TPMS diagnostic tool, ensuring future compatibility.
• Ventil inkluderet: Each sensor comes with a rubber valve stem for installation.

6. Vedligeholdelse

6.1 Cleaning the DT41 Tool

Tør værktøjet af med en blød,amp cloth. Do not use abrasive cleaners or solvents. Ensure the tool is dry before storage or further use.

6.2 Pleje af batterier

For at forlænge batteriets levetid bør du undgå at aflade værktøjet helt ofte. Opbevar værktøjet et køligt og tørt sted, når det ikke er i brug i længere perioder.

6.3 Sensor Storage

Store unprogrammed sensors in their original packaging in a cool, dry environment to protect them from damage and environmental factors.

7. Fejlfinding

Hvis du støder på problemer, kan du bruge følgende almindelige løsninger:

• Tool not powering on: Ensure the battery is charged. Connect the tool to the power adapter and try again.
• Sensor not reading/activating: Verify the correct vehicle make, model, and year are selected. Ensure the tool is held close to the valve stem. Check for physical damage to the sensor.
• Programmeringsfejl: Ensure the DT41 tool's software is up-to-date. Confirm the sensor is compatible with the selected vehicle application.
• Relearn procedure failure: Double-check that all steps of the relearn procedure are followed precisely. Ensure the OBD2 cable is securely connected if required.

For persistent issues, consult the manufacturer's webwebsted eller kontakt kundesupport.

8. Specifikationer

8.1 BH SENS DT41 TPMS Tool

8.2 IntelliSense UVS7051 TPMS Sensors

9. Garanti og support

Warranty information for the BH SENS DT41 TPMS Tool and IntelliSense UVS7051 Sensors is typically provided with your purchase documentation or can be found on the manufacturer's official website. For technical support, service, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer.